• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6B
• /
• pp.575-583
• /
• 2004

In this paper, we extend the multiple time scale control framework to the window-based congestion control, in particular, such as the TCP. This is performed by interfacing the TCP with a large time scale control module which adjusts the aggressiveness of the bandwidth consumption behavior exhibited by the TCP as a function of large time scale Self-Similar network state. i.e., conformation that exceeds the horizon of the feedback loop as determined by the RTT. How to effectively utilize such an information-due to its probabilistic nature, dispersion over the multiple time scales, and affection on the top of the existing window-based congestion controls-is a non-trivial problem. The evaluation performance of the multiple time scale TCP is facilitated by a simulation of the bench-mark environment which is based on the physical modeling of a self-similar traffic. We explicate our methodology for discerning and evaluating the impact of changes in transport protocols in the protocol stack under the self-similar traffic conditions. We discuss issues arising in the comparative performance evaluation under heavy-tailed workloads.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.999-1005
• /
• 2008

RFID(Radio Frequency IDintification) leader is collision of data, when recognizing the multiple tag the inside area. This collision became the cause which delays the tag recognition time of the leader. The protocol which prevents the delay of tag recognition time of the leader the place where representative it uses QT(Query Tree) algorithms, it uses a collision bit position from this paper and are improved QT-MTC(Query Tree with Multi-Tag Cognition) algorithms which it proposes. This algorithm stored the bit position which bit possibility and the collision where the collision happens occurs in the stack and goes round a tree the number of time which, it reduced could be identified two tags simultaneously in order, it was planned. A result of performance analysis, It compared in QT protocols and the this algorithm against the tag bit which is continued a high efficiency improvement effect was visible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.173-178
• /
• 2019

Recently, the types and amount of data generated, collected, and measured in IoT such as smart home, security, and factory are increasing. The technologies for IoT service include sensor devices to measure desired data, embedded software to control the devices such as signal processing, wireless network protocol to transmit and receive the measured data, and big data and AI-based analysis. In this paper, we focused on developing a gateway for interfacing heterogeneous sensor network protocols that are used in various IoT devices and propose a heterogeneous network interface IoT gateway. We utilized a OpenWrt-based wireless routers and used 6LoWAN stack for IP-based communication via BLE and IEEE 802.15.4 adapters. We developed a software to convert Z-Wave and LoRa packets into IP packet using our Python-based middleware. We expect the IoT gateway to be used as an effective device for collecting IoT big data.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.20-24
• /
• 2022

In the process of long-term use of PEMFC (Proton Exchange Membrane Fuel Cells), chemical degradation of membrane electrode assembly (MEA) occurs due to corrosion of stack elements and contamination of supply gas. In this study, we investigated whether chemically degraded MEA can be recovered by acid washing. The performance was measured and compared in a PEMFC cell after contamination with iron ions and washing with an aqueous sulfuric acid solution. The performance was reduced by about 25% by 0.5 ppm iron ion contamination, and 97.1% performance recovery was possible by washing of 0.15 M sulfuric acid. The membrane resistance was increased due to iron ion contamination of the polymer membrane, and the ionic conductivity was restored by washing the iron ions from the membrane while minimizing the loss of the electrode catalyst by washing with a low-concentration sulfuric acid aqueous solution. The possibility of solving the decrease in durability caused by chemical contamination of PEMFC MEA by the acid washing was confirmed.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.17-25
• /
• 2022

Recently the massive amount of data has been generated because of the number of edge devices increases. And especially, the number of raw unstructured HTML documents has been increased. Therefore, MRC(Machine Reading Comprehension) in which a natural language processing model finds the important information within an HTML document is becoming more important. In this paper, we propose HTDE(HTML Tag Depth Embedding Method), which allows the BERT to train the depth of the HTML document structure. HTDE makes a tag stack from the HTML document for each input token in the BERT and then extracts the depth information. After that, we add a HTML embedding layer that takes the depth of the token as input to the step of input embedding of BERT. Since tokenization using HTDE identifies the HTML document structures through the relationship of surrounding tokens, HTDE improves the accuracy of BERT for HTML documents. Finally, we demonstrated that the proposed idea showing the higher accuracy compared than the accuracy using the conventional embedding of BERT.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.107-111
• /
• 2023

Journaling techniques are widely used to maintain a consistent file system state in the event of a system crash. As existing journaling techniques are designed for block storage such as HDDs, they are not efficient for byte-addressable persistent memory media. This paper proposes a metadata journaling technique for in-memory file systems that has the ability of avoiding inconsistent file system states in crash situations. The proposed journaling technique reduces a large amount of writing by making use of the byte-addressable feature of memory media and bypasses heavy software I/O stack. Experimental results with the IOzone benchmark show that the proposed journaling technique improves the performance of Ext4 by 49.2% on average.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.11-15
• /
• 2016

Proton Exchange Membrane Fuel Cells (PEMFC) instead of batteries is appropriate for long time flight of unmanned aero vehicles (UAV). In this work, $NaBH_4$ hydrolysis system supplying hydrogen to PEMFC was studied. In order to decrease weight of $NaBH_4$ hydrolysis system, enhancement of hydrogen yield, recovery of condensing water and maintenance of stable hydrogen yield were studied. The hydrogen yield of 3.4% was increased by controlling of hydrogen pressure in hydrolysis reactor. Condensing water formed during air cooling of hydrogen was recovered into storage tank of $NaBH_4$ solution. In this process the condensing water dissolved $NaBH_4$ powder and then addition of $NaBH_4$ solution decreased system weight of 14%. $NaBH_4$ hydrolysis system was stably operated with hydrogen yield of 96% by 2.0g Co-P-B catalyst for 10 hours at 2.0L/min hydrogen evolution rate.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.29-35
• /
• 2022

This paper proposes a fuel cell education framework installed on a Metaverse environment, which is to reduce the burden of education costs and improve the effect of education or learning. This Meta-Fuel cell platform utilizes the Unity 3D Web and enables not only theoretical education but also hands-on training. The platform was designed and developed to accommodate a variety of unit education contents, such as ppt documents, videos, etc. The platform, therdore, integrates ppt and video demonstrations for theoretical education, as well as software content "STACK-Up" for hands-on training. Theoretical education section provides specialized liberal arts knowledge on hydrogen, including renewable energy, hydrogen economy, and fuel cells. The software "STACK-Up" provides a hands-on practice on assembling the stack parts. Stack is the very core component of fuel cells. The Meta-Fuelcell platform improves the limitations of face-to-face education. It provides educators with the opportunities of non-face-to-face education without restrictions such as educational place, time, and occupancy. On the other hand, learners can choose educational themes, order, etc. It provides educators and learners with interesting experiences to be active in the metaverse space. This platform is being applied experimentally to a education project which is to develop advanced manpower in the fuel cell industry. Its improvement is in progress.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.29-37
• /
• 1993

Some new podands containing phenyl(B), benzyl(Bz), pyridine(Py), quinoline(Q) and naphthalene(Np) as end-groups, and oxygen(O) and sulfur(S) in ether chains as donor atoms have been synthesized. The univalent cation binding characteristics of these podands have been studied by NMR titration and solvent extraction. By NMR titration we have found that the most of podands form 1:1 complexes with $Ag^+$ ion. Especially, the substituted sulfur atoms in ether chains show the effects to enhance the stabilities. We also carried out the extractions of univalent cation picrates including alkaline metal, $Ag^+$, $Tl^+$ and $NH_4{^-}$ ions from aqueous to chloroform layer by using these podands. We found that the extractabilities of $Ag^+$ ion with the quinoline-containing podands such as, $Q_2O_4$, $Q_2O_5$ and $BQO_5$ were 86.8, 86.6 and 48.0% respectively, but the naphthalene-containing podands such as, $Np_2O_4$ and $Np_2O_5$ extracted quite small amount. Otherwise, in cases of $Bz_2O_3S_2$(89.4%), $B_2O_2S_2$(96.8%), $B_2O_3S_2$(58.9%), $Py_2O_2S_2$(58.8%), $Py_2O_3S_2$(42.1%), and $B_2O_4S$(15.0%), interestingly, $Bz_2O_3S_2$ which have sulfur atoms and benzyl groups showed the highest extraction selectivity for $Ag^+$ ion. This result seems due to not only the strong interaction of $Ag^+$ ion with sulfur donors according to the HSAB theory, but also the effective ${\pi}-{\pi}$ stacking interaction between two aromatic end-groups which is enhanced by the flexible methylene spacing group in benzyl groups instead of phenyl groups. The extraction coefficients gave the similar tendency as the extractabilities and the stabilities. From these results, it could be concluded that the predominant factor affected to extraction coefficients is the stabilities, which are strongly influenced by the structures of podands.