• Tribology and Lubricants
• /
• v.26 no.2
• /
• pp.142-148
• /
• 2010

The purpose of this study is to find how to be formed the wet film thickness during the low friction coating process for a piston skirt with application to the theory of screen printing. In other words, in this research, it is to derive the general expressions predicting the pressure under a blade and the volume of coating fluid passing through the blade edge. Using these expressions, it is to be approved that the current operation characteristics of a screen printing system to a sample blade coating process for low friction coating on a piston skirt can be quantitatively assessed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.145-158
• /
• 1988

The purpose of this study was develop a skirt pattern drafting method for pregnant women on the basis of their physical characteristics. The study procedures and results were as follows; 1. One hundred and one women who were 7,8 or 9 months pregnant were measured on 29 items. The result was computed to obtain descriptive statistics and correlation coefficients between each items. 2. Two new skirt patterns were developed based on the data analysis. 3. The sensory evaluation was applied to evaluate the new patterns for pregnant women by comparing them with the Japanese MOONHWA method skirt pattern for pregnant women. Sensory evaluation for appearance: According to the result of Mann-Whitney test among the three skills the skirt A was most satisfactory, and the next was the skirt B followed by Japanese MOONHWA method Skirt. Sensory evaluation for comfort; The result of Mann-Whitney test showed that the skirt B was comfortable, and the next was the shirt A followed by Japanese MOONHWA method skirt.

• Proceedings of the ESK Conference
• /
• 1993.10a
• /
• pp.205-219
• /
• 1993

The purpose of this study was to determine maximal width of bodice and skirt pattern of 50 college girls for more scientific patternmaking development in clothing construction. The body measurements data of this study was calculated by SAS, means analysis, regression analysis and T-test were used. The results are as follows. 1. The results of analyzing the whole 85 items of the entire body measurements of model are in table 2. 2. It was suggested the whole average cross section of measurement parts by rohrer index as the result of gathering the each section. 3. Representative items were suggested as fundamental parts in determining the maximal width of bodice and skirt basic pattern by rohrer index. 4. The entire abbreviated calculation formula of bodice and xkirt pattern was suggested.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.758-759
• /
• 2010

In this study, it was experimentally confirmed that the phenomenon of resonance effect of wave drag in two wavy walls. The channel had saw-tooth type of relief surfaces when supersonic gas flows into this channel. Experiment was carried out on the differential apparatus by conducting the comparative test of two nozzles (round sonic nozzle and two-dimensional nozzle with wavy walls). The two-dimensional nozzle was joined alternately with flat walls which had saw-tooth type of symmetrical and asymmetric reliefs. Two-dimensional nozzle was designed for the M=3 and profiled parabolic contour.

• Journal of the Korean Institute of Gas
• /
• v.14 no.2
• /
• pp.1-6
• /
• 2010

The strength safety of high pressure gas cylinder has been analyzed by using a finite element method. In this study, the internal gas pressures of a steel bombe include a service charging pressure of $9kg/cm^2$, high limit charging pressure of $18.6kg/cm^2$, high limit of safety valve operation pressure $24.5kg/cm^2$, and hydraulic testing pressure of $34.5kg/cm^2$. The computed FEM results indicate that the strength safety for a service charging pressure of $9kg/cm^2$ and high limit charging pressure of $18.6kg/cm^2$ is safe because the stress of a gas cylinder is within yield strength of steel. But the stress for a hydraulic testing pressure of $34.5kg/cm^2$ sufficiently exceeds the yield strength and remains under the tensile strength. If the hydraulic testing pressures frequently apply to the gas cylinder, the bombe may be fractured because a fatigue residual stress is accumulated on the lower round end plate due to a plastic deformation. The computed results show that the concentrated force in which is applied on a skirt zone does not affect to the lower round end plate, and the most weak zone of a bombe is a middle part of a lower round end plate between a bombe body and a skirt for a gas pressure. Thus, the FEM results show that the profile of a lower round end plate is an important design parameter of a high pressure gas cylinder.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1233-1237
• /
• 2011

Insertion loss, ripple, and return loss were -1.7093dB, 0.9162dB, and -24.762dB with Cellular Rx(824~849 MHz), -1.8021dB, 0.9615dB, and -22.258 with Tx(869~894 MHz), repectively. On the other hand, insertion loss, ripple, and return loss were -2.0149dB, 1.5163dB, and -34.046 dB with DCS Rx(1710~1785 MHz), -1.5894dB, 2.3742dB, and -33.058dB with Tx(1805~1880 MHz), respectively. In the particular, the attenuations in 5MHz edge of band width were -9.1399dB and -14.336dB with Cellular Rx, -7.0343dB and -5.2943dB with Cellualr Tx, respectively. The attenuations of DCS Rx from the relative Tx were -58.298dB and -65.644dB, respectively. On the other hand, those of DCS Tx from the relative Rx were -70.659dB and -50.488dB, respectively. From the aboved results, the dielectric filters for Celluar and DCS band with Isolator showed the good skirt and ripple characterics.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.9
• /
• pp.5-12
• /
• 2016

Numerical analyses were carried out to simulate tilting control on the suction pile for offshore wind power embedded into cohesive soil and cohesionless soil using finite element software, ABAQUS. A 3-dimensional suction pile was modelled as a wished-in-place pile with $1^{\circ}$ tilted from vertical line. The inner room of suction pile was divided into 3 separate rooms for tilting control, and point load was applied to the center of gravity of a separate room to restore the original position of the suction pile. From numerical analyses, required suction pressure was obtained for desired tilting degree, and the maximum/minimum principle stresses of concrete skirt and the Mises stresses of inner steel wall were collected at original position. It was found that the required suction pressure was about 410 kPa for cohesive soil, and about 1,800 kPa for cohesionless soil.; likewise, obtained stresses were greater for cohesionless soil than cohesive soil.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1510-1519
• /
• 2007

This comparative study analyzes and compares tight skirt sewing methods which are found in the clothing configuration reference text books available in contemporary universities and which are used in commercially-available domestic consumer products. The study samples included 15 text books and 12 tight skirt consumer products of different brands on sale at three department stores in Seoul each of which had a belt, a back-centered zipper, and back double slits. The findings of the study are summarized as follows: First, text books mainly show very basic sewing methods of using zippers on both sides of the straight-lined waist belt. This indicates that it is necessary for such methods to be complemented so that they cover a recent variety of designs, materials, and sewing machines. For consumer products, the main sewing method is to use a curved waist belt and a console zipper in silhouette running across half the hipbone. Second, consumer products employ three different types of cutting and sewing methods for putting an inseam on the center of the back slit part: to leave the whole inseam hemmed in the back center, to cut the left side of the inseam to the upper part of the back slit, and to cut the inseam to both the upper parts of the back slit. However, a method shown in most of the sampled text books is to cut the inseam of the back center to both the upper parts of the back slit. Third, the way of finishing a bottom edge hem in the text books is to do slip-stitch, herringbone stitch, and slinting hemming, in order after doing over-lock stitch, or to cut the hem on the bias and then slip-stitch, while for the consumer products the most frequently used sewing method is to finish the bottom edge hem by doing secoui-stitch. Finally, while in the text books the method of stitching darts and tucks is used for lining, the main lining method used in consumer products is to make tucks only. Also in the way of stitching the side seams of lining or the seams of the back center, there is a difference between the two sample groups of text books and the consumer products: while the former suggests using both open seams and over-lock stitch, the latter is found to finish the seams using an over-lock stitch only.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.178-194
• /
• 2011

Due to the population growth of the old aged, Korea is also entering into an aging society. But a research on the pattern design to the old aged is much to be desired. The purpose of this research is to design skirt pattern fitted for each body type by categorizing the lower body type of the old aged woman. For the way of research, categorized the body type by using the female measuring size from the 65 years old to 99 years old which has been measured by the Korean body size research as an assay data, and base on this data, a suitable skirt pattern for each body type of the old aged woman was designed by practicing the exterior evaluation. The data analysis was done with the statistical treatment in SPSS 12.0, and the results are as follows. The lower body type of the old aged woman were divided into the type 1. The circumference article is the biggest compared to the height article regarding to the lower body type of the old aged woman. The type 2. The height article and the circumference and thickness articles are the poorest. The type 3. The height article is the biggest and the hip width and calf circumference are thicker than the waist width. The type 4. The height article is the lowest and the waist width is thicker instead the hip and leg are thinner. In type 1, The pattern was modified by increasing 1cm a length of the dart and raising up 1.2cm at the cross point between side line and waist line. In type 2, the basic pattern was used, and in type 3, using the outline of the basic pattern however, increased 1cm a length of the dart and modified the amounts of dart by handling the art in curve, and modified the waist line to be more three-dimensional curves by raising up 1 cm at the cross point between waist line and side line and falling down 0.5cm at the cross point between the back center line and the waist line. In type 4, modified the amounts of front and back dart to 1.25cm, and raised up 0.8cm at the cross point between side line and waist line, and modified the waist line and the side seam line in a gentle curve by reducing circumference of the skirt tail to 1cm from the side seam line.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.12
• /
• pp.61-73
• /
• 2023

Suction buckets are feasible options for offshore foundations to support subsea structures in deep water, enabling suction-induced installation by pumps. Recently, hybrid suction bucket foundations that combine single or multiple suction buckets with a mat foundation have been considered. The foundations effectively increase the load capacity while reducing construction costs. However, there is still insufficient experimental validation of hybrid suction bucket foundations regarding their bearing capacity. Furthermore, research on the horizontal load capacity under low vertical and moment loads is inadequate. In this study, we investigate the feasibility of using a hybrid suction bucket foundation for subsea installations in clay. We considered two types of hybrid suction bucket foundations: a circular mat with a single suction bucket and a square mat with multiple buckets. Centrifuge tests were performed to understand the hybrid suction bucket foundation characteristics under horizontal loads and their corresponding bearing capacity. Particularly, we verified the effect of the mat foundation and bucket embedment depth on the horizontal bearing mechanism and capacities. Results confirmed that the hybrid suction bucket foundation outperforms the single suction bucket.