• 한국지구과학회:학술대회논문집
• /
• 2005.09a
• /
• pp.103-111
• /
• 2005

최근의 급속한 기술 발달을 통해 고전적인 측량 기법을 극복한 3차원 레이저 스캐너를 댐 관리기법의 연구에 적용하였다. 다목적댐과 같은 대규모 댐의 경우, 댐체 변형 특성 파악 및 주변 사면 안정성 연구 등과 관련하여 많은 측량이 필요하지만, 주로 제한된 점 (point)자료를 획득하여 분석하는 데 그쳤다. 본 연구에서는 이를 극복하기 위하여 3차원 레이저 스캐너 장비를 도입하여 조사하고자 하는 대상체에 대해 3차원 디지털 좌표를 다량으로 획득하여 이를 분석 처리함으로써 보다 효율적으로 댐 관리가 이루어지도록 하였다. 본 연구에서는 보강 사면에 대한 변형 특성을 파악하기 위해, 7개월 간격으로 3차원 스캐닝을 통해 좌표 값을 획득하여 이의 분석을 통해 향후 거동에 대해 예측하였다. 분석을 위해 두 시기의 스캐닝 자료를 병합(registration)하여 상대차이를 분석하고, 틀어진 각을 측정하였다. 또한 도면이 존재하지 않는 지자체의 댐에 대한 신속 측량을 3차원 레이저 스캐너로 대체하기 위한 방안에 대해 제시하고, 준공예정인 댐에 대한 스캐닝을 수행하여 설계 도면과의 비교 검토 결과를 분석하였으며, 향후 다양한 이용 방안에 대한 검토와 토론을 제안하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.274-280
• /
• 2002

This paper addresses the vibration mode shape measurement technique utilizing a Continuous Scanning Laser Doppler Vibrometer (CSLDV). The continuous scanning capability is added to the conventional discrete Laser Doppler Vibrometer by reflecting the laser beams on the surface of the object using two oscillating mirrors. The bow scanning resulted from the proposed scanning method is eliminated by feedback control. The velocity output signal from the CSLDV is modulated to give the spatial velocity distribution in terms of coefficients which are obtained from the Fast Fourier Transformation of the time dependent velocity signal. Using the Chebyshev series form, the analysis of the vibration mode shape techniques for straight Bine scanning and 2 dimensional scanning are presented and discussed. The performance of the proposed SLDV is presented using the experimental results of the vibration mode shape of a plate

• Korean Journal of Optics and Photonics
• /
• v.25 no.3
• /
• pp.142-145
• /
• 2014

In this paper we record the complex hologram of a real object with optical scanning holography (OSH). We reconstruct the complex hologram using a numerical process, and then we evaluate the degree of contamination by speckle noise between the reconstruction of the complex hologram and the image captured by a CCD camera. We use the contrast of the speckle pattern for quantitative evaluation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.326-327
• /
• 2017

저전력 블루투스가 공개 된 이후 저전력 블루투스 비콘을 이용한 서비스들이 출시되고 있다. 비콘 기반 서비스는 사용자의 스마트폰이 블루투스 기능을 활성화해두었을 때, 일정한 주기의 블루투스 스캐닝을 통해 이용할 수 있다. 블루투스 비콘이 밀집된 실내 공간의 경우, 동일한 비콘이 중복 탐지되거나 사용자가 사용하지 않을 먼 거리의 비콘까지 탐지하게 되므로 스마트폰에서 불필요한 에너지 소모가 발생한다. 이러한 문제를 해결하고자 본 연구에서는 실내 구획화를 통해 동일 영역 내에서 비콘이 중복으로 탐지되는 것을 방지하는 방법과, 사용자 이동성에 따른 동적 스캐닝 주기 최적화를 통해 밀집된 실내 공간에서도 누락되는 비콘 신호를 최소로 하는 기법을 제안한다. 이러한 사용자 이동성에 기반한 스캐닝 주기 최적화 방법은 스마트폰의 전력소모량을 감소시킨다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1472-1479
• /
• 1999

In this paper, e proposed and implemented multi-FBG strain sensor system which used both wavelength scanning and locking of Fabry Perot filter for improve the performance of sensor system. The resolution of the sensor system is 3 and 10 $\mu$strain for the single and multi sensor system respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.90-104
• /
• 2008

Laser scanning technology with high positional accuracy and high density will be widely applied to vast range of fields including geomatics. Especially, the development of laser scanning technology enabling long range information extraction is increasing its full use in civil engineering. This study taps into the strengths of a terrestrial laser scanning technique to develop a tunnel cross section management system that can be practically employed for determining the cross section of tunnels more promptly and accurately. Three dimensional data with high density were obtained in a prompt and accurate manner using a terrestrial laser scanner. Data processing was then conducted to promptly determine arbitrary cross sections at 0.1meter, 0.5meter and 1.0meter intervals. A laser scanning technique was also used to quickly and accurately calculate the overbreak and underbreak of both each cross section and the entire tunnel section. As the developed system utilizes vast amounts of data, it was possible to promptly determine the shape of arbitrary cross section and to calculate the overbreak and underbreak more accurately with higher area precision. It is expected, therefore, that the system will not only enable more efficient and cost effective tunnel drilling management and monitoring but also will provide a basis for future construction and management of tunnel cross section.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.3
• /
• pp.30-43
• /
• 2017

The purpose of this study is to improve the usefulness of photogrammetry in the field of cultural heritage recording concentrated on laser scanning. Two measurement methods(laser scanning, photogrammetry) were compared in terms of accuracy and reality for the Rock-carved Standing Buddha in Singyeong-ri, Hongseong. With regard to accuracy, the distances of major points by both shape information and between the two shape information were compared. Only a deviation of about 1mm was found in the distance measurement of the major points by both shape information. In particular, the average distance between two shape information identified through aligning was only about 0.01mm. Also, the absolute deviation within about 2mm accounted for 70% of the total, and the absolute deviation within about 3.5mm was found to be 95.4% of the total. These values showed very high similarity between laser scanning and photogrammetry-based shape information. In respect of reality, the carved depth, texture, and patterns were compared. As a result of comparing four cross-sectional shapes, only slight differences were found in the shape information of both measurement techniques and similar shapes were identified. The overall texture of both shape information was also similar. However, the detailed shape based on the photogrammetry with decimation is realized with a smoother texture than the original and laser scanning. In particular, Photogrammetry also realistically expressed the various ornaments carved in the Rock-carved Buddha and the patterns with shallow depths were comparatively detailed.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.391-396
• /
• 2021

In this study, items for forest policy and forest resource research in Austria, Japan, New Zealand, and Indonesia, which are major forest advanced countries, were investigated, and the applicability of point cloud data acquired through laser scanning was identified. Through the study, it was found that forest policies in developed countries are being pursued for the purpose of sustainable forest conservation and management, job creation, and timber productivity improvement, and that new technologies are being researched and applied to actual projects. Korea has a high proportion of forests compared to the national land area compared to major forestry developed countries, but the accumulation of trees is relatively low, so it is a time for scientific forest management to improve the accumulation of trees. To understand the applicability of laser scanning technology, a forest resource survey using point cloud data was conducted, and the diameter of breast height, height, number of trees per unit area were calculated, and the shape of the crown was identified. If field experiments and accuracy evaluations applying various laser scanning technologies are carried out in the future, it will be possible to present the quantitative improvement of forest resource survey using foil cloud.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.315-317
• /
• 2008

본 연구에서는 리모델링 대상 백화점 건물의 내부를 지상레이져스캐너(z-f 레이저 장비)에 의해 3D 데이터를 취득하고 일련의 처리과정을 통하여 건물 내부의 리모델링 시공을 위한 단면자료 추출 과정 등에 대하여 제시하였다. 리모델링시공을 위해서는 건물내부에 대한 정확한 도면이 필요하며, 시공당시의 설계도면이 분실 또는 훼손되었든지 실제치수가 당초 설계와 다른 경우 복잡한 내부를 측량해야 하는데 이 경우 레이저 스캐닝 및 관련 소프트웨어에 의한 도면데이터 추출과정을 제시하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.318-323
• /
• 2008

국부적이지만 수 mm단위까지 스캔이 가능한 지상LiDAR 장비를 이용하여 사면을 스캐닝한 후에 사면의 6개 지점에 대하여 강제로 변화를 준 후 다시 스캐닝하여 분석한 결과 0.008m의 평균편차를 나타내었다. 이것을 볼 때 미세변화 탐지를 위한 기법으로 지상 LiDAR자료의 적용이 유효할 것으로 판단된다.