• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.64-73
• /
• 2001

This paper presents a Zero Voltage and Zero Current Switching (ZVZCS) 3-Level DC/DC converter. This converter overcomes the drawbacks presented by the conventional Zero Voltage Switching(ZVS) 3-Level converter, such as high circulating energy, severe parastic ringing on the rectifier diodes, and limited ZVS load range for the inner switches. The converter presented in this paper uses a phase shift control with a flying capacitor in the primary side to achieve ZVS for the outer switches. Additionally, the converter uses an energy recovery snubber to reset the primary current during the free-wheeling stage to achieve ZCS for the inner switches. The proposed converters are analyzed and verified on 6kW, 39kHz experimental prototype.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1079-1089
• /
• 2013

The flow characteristics in a solid particle incinerator are investigated numerically for high burning rate of wastes. The studied incinerator employs both a swirl flow used in the furnace of powerplants and a design concept applied to a rocket combustor. As the first step, the non-reactive flow field is analyzed in the incinerator with primary and secondary injectors through which solid fuel and air are injected. The deflection angle of a primary injector, inclination angle of a secondary injector, and gap between the two types of injectors are selected as design parameters. The swirl number is adopted for evaluating the degree of swirl flow and estimated over wide ranges of three parameters. The swirl number increases with deflection angle, but it is affected little by inclination angle. Recirculation zones are formed near the injectors, and their size affects the swirl number. The swirl number decreases with the zonal size of recirculation. From the numerical results, the design points can be found with strong swirl flow.

• Clean Technology
• /
• v.28 no.3
• /
• pp.258-266
• /
• 2022

Resource productivity (GDP/DMC) is defined as GDP divided by DMC. However, it has shortcomings when estimating the value-added generated from material processing. In this paper, an energy coefficient is applied to GDP to develop a sub-indicator (referred to as GDPe/DMC). Consequently, South Korea, which is a secondary industry-oriented country, created 1,094.60 USD/ton from input materials and was ranked 4th on the OECD list, which is 10 levels higher than the level estimated by GDP/DMC. However, Luxembourg, which is a tertiary industry-oriented country, is ranked 16th on the OECD list, which is 12 levels lower than the level estimated by GDP/DMC. The resource productivity estimated by the sub-indicator (GDPe/DMC) developed in this study indicates that secondary industry-oriented countries are undervalued in the existing main GDP/DMC calculation. On the other hand, tertiary industry-oriented countries are downgraded due to the industrial features of the GDPe/DMC calculation. As a result of this paper, GDPe/DMC could be considered a more reasonable indicator to directly reflect the material input effect compared to the existing main indicator, GDP/DMC. This means that GDPe/DMC-induced resource productivities could be estimated to be slightly higher than the GDP/DMC-induced resource productivities for secondary industry-oriented countries. It is expected that the sub-indicator, GDPe/DMC, proposed in this study could be useful especially for comparing and analyzing the resource productivities between countries that have different industry structures. This study intended to consider a structurally energy/resource-intensive industry in estimating and analyzing national-level resource productivity. Thus, the sub-indicator, GDPe/DMC, may help minimize the distortion of interpreting national resource productivities in various situations, and be utilized as a more efficient tool when used together with GDP/DMC.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.11a
• /
• pp.146-148
• /
• 2003

Bayer 공정은 가성소다를 이용하여 보오크사이트로부터 수산화알루미늄을 추출하는 공정이다. 그러나 보오크사이트 추출 후 1차 침전공정에서 반응한 보오크사이트 잔사는 침전시킴으로써 깨끗한 공정액을 분리하는 데 이때 침전되지 못한 다량의 분산성 고형물이 공정액 중에 존재하게 되는데 이를 분산성 보오크사이트(레드머드) 미립자라하며 보통 80-100mg/$\ell$의 농도를 나타낸다. 그러므로 이를 제거하기 위해 다음 공정인 입상여과필터 공정을 사용하는데 이때 필터링 효율증대를 위해 보조제로써 다량의 소석회(Ca(OH)$_2$)를 투여하여 공정액 중의 고형물을 농도를 8-100mg/$\ell$에서 5mg/$\ell$로 낮추는 공정을 사용하고 있다. 특히 국내 수산화알루미능 제조회사일 KC(주)의 경우 소석회 사용량이 일 10톤, 년간 약 3,600톤을 사용함으로써 소석회의 사용량에 따라 같은 량의 슬러지가 발생되게 된다. 따라서 여과후 발생되는 슬러지의 처리비용 문제(연간 9천만원)와 소석회의 미립자에 의한 공정액의 2차 오염과 제품 품질 저하(quality claim) 및 소석회 사용량에 따른 연간 원료비(연간 3억원) 등의 상당한 문제점을 나타내고 있는 실정이다. 아울러 최근 고품위 수산화알루미늄의 공급 요구에 따라 여과시 정제기준이 점차 낮아져 이제는 1mg/$\ell$ 이하를 유지하여야 하는 근본적인 문제에 봉착해있는 실정이다. 그러므로 본 연구에서는 소석회를 사용하는 입상여과법을 대체하기 위한 신공정개발을 추진하였으며, 그동안 카트리지여과법 등의 다양한 실험 결과로부터 최근 필터 보조제를 첨가하지 않는 물리적 여과방법인 세라믹 막 여과법의 적용 가능성을 확인하고 친환경공정인 세라믹 막 여과 실용화 공정 기술을 개발하였다. 세라믹 막 여과 법은 여과 보조제를 사용하지 않으므로 2차적인 슬러지 발생등의 환경문제를 발생하지 않으며, 공정액에 첨가제를 투입하지 않으므로 순환형 친환경공정으로 각광받을 수 있다. 본 연구에서는 고온, 고농도의 NaOH 수용액의 처리에 적합한 막소재와 발생될 수 있는 제반 문제점 등을 파악하였고, 장기간의 실험을 거쳐 최적 투과 압력(Trans membrane pressue), 세정 조건 및 주기, 막재질에 있어서 보강하여야 할 Point, 최적 운전 조건들을 토출해 내었고, 향후 실제 Plant에 적용할 계획이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.397-397
• /
• 2022

오늘날 급격한 인구증가 및 도시화로 인해 음식물류 폐기물 발생량이 크게 증가하였으며, 음식물류 폐기물에서 발생되는 음폐수의 적절한 처리방안에 대한 관심이 증가하였다. 혐기성 소화(Anaerobic digestion; AD)는 음폐수의 바람직한 처리방법으로 알려졌지만, 긴 처리기간 및 공정 불안정 등의 문제로 개선이 필요하며, 그 중 기존 AD에 보조 반응조를 추가한 보조 미생물전기화학적 혐기성소화(Auxiliary bioelectrochemical anaerobic digestion; ABEAD)가 적절한 개선방안으로 제시되었다. 하지만 아직 20 L 이상 용량에서의 연구는 이뤄지지 않았으며, 따라서 본 연구에서는 100 L의 용량에서 ABEAD의 성능향상을 평가하고 규모증가에 따른 성능변화를 비교하였다. 반응조는 AD와 ABEAD로 구성되었다. 유효용량 100 L, 유기물부하율 4 kg/m³/d, HRT 20 days 및 중온소화(35℃) 조건으로 운전하였으며, AD는 기계적 교반, ABEAD는 기계적 교반 및 펌프를 통한 bulk 용액 순환이 이뤄졌다. ABEAD의 전극재질은 SUS304를 사용하였고, 0.4V의 전압을 공급하였다. 성능비교는 pH, 휘발성지방산(Volatile fatty acids; VFAs), 유기물제거율 및 메탄 생성량을 비교해 수행하였다. 실험결과 AD는 pH 및 VFAs가 각각 평균 7.37 및 3,880 mg/L, ABEAD는 각각 평균 7.5 및 2,870 mg/L로 VFAs의 빠른 처리를 통해 공정안전성 향상되었고, 유기물제거율 및 메탄생성량의 경우 AD는 각각 평균 65.8 % 및 85.1 L/d, ABEAD는 각각 평균 76.1 % 및 108.1 L/d로 유기물의 빠른 처리 및 메탄전환이 이루어져 비교적 큰 규모에서도 ABEAD의 성능향상이 나타남을 확인하였다. 또한 이전 소규모 연구들과 비교를 통해 규모에 따른 성능향상폭을 비교했을 때에도 큰 차이가 나지 않는 것으로 판단되며, 따라서 ABEAD는 BEAD 기술의 상용화 및 적용에 적합한 것으로 사료된다.

• Journal of Chest Surgery
• /
• v.35 no.5
• /
• pp.329-335
• /
• 2002

Background: The surgical technique for biventricular assist device(BVAD) implantation has mainly consisted of cannulation procedures. A median sternotomy has been the technique of choice as it gives a surgeon an excellent exposure of the heart. However, considering that most patients require a future sternotomy or already have a previous sternotomy, sternotomy-related complication remains a major concern in BVAD implantation. Based on this consideration as well as the clinical experiences of conventional heart surgery, the authors have hypothesized that the cardiac chambers for BVAD cannulation can be approached from the right side of the heart. The purpose of this studs to develop a novel surgical technique of right thoracotomy for BVAD implantation in an animals study. Material and Method: For last two years, 16 (11 calves, 3 canines, and 2 sheep) out of 30 experimental animals with AnyHeart implantation underwent a right thoracotomy. The device was used as an implantable BVAD in 14 animals, a wearable BVAD in 1, and an implantable LVAD in 1. The chest cavity was entered through the 4th intercostal space or the 5th periosteal bed. As for the BVAD use, a right inflow cannula was inserted into the right atrial free wall and a right outflow cannula was grafted onto the main pulmonary artery. A left inflow cannula was inserted into the interatrial groove and a left outflow cannula was grafted on the innominate artery of the ascending aorta. The connecting tubes were brought out through the thoracotomy wound and connected to the pump located in the subcutaneous pocket at the right flank. Result: Except for the 5 animals for a lilting test or during the early learning curve, all recovered smoothly from the procedures. The inflow drainage allowed the pump output 6.5 L/min at the maximum with 3-3.5 L/min in an average. Of the survivors, there noted no procedure-related mortality or morbidity. Necropsy findings demonstrated the well-positioned cannula tips in the each cardiac chamber

• Journal of the korean veterinary medical association
• /
• v.25 no.10
• /
• pp.595-606
• /
• 1989

항원제시세포(APC)와 보조T세포 간의 협력작용에 의하여 활성화된 작동세포(NK세포, CTL, K세포, 대식세포, 과립구 등)의 종양세포, 이식장기 및 세포내기생세균에 감염된 각종 세포에 대한 세포독성작용은 생체방어를 위한 중요한 세포성면역기전이다. 지난 몇 년간 세포성면역기전에 관한 많은 연구에도 불구하고 T림파구매개성 세포독성작용의 면역생물학적기전은 확실히 밝혀있지 않다. 지금까지 알려진 중요한 연구내용을 요약하면 다음과 같다. 1. 세포독성작용을 나타내는 작동세포로는 NK세포, CTL, K세포, 대식세포/단핵구 및 과립구가 있다. 2. T세포의 세포표면항원분자군(CD)으로는 $CD_{2},\;CD_{3},\;CD_{4}[Ly_{3}T_{4}],\;CD_{5}[=Ly_{1}],\;CD_{7},\;CD_{8}[Ly_{2,3}]$가 있으며 $CD_{4}$는 보조Ttpvhdml 특이마커이고 $CD_{8}$는 세포독성 T세포 및 억압T세포의 특이마커이다. 주요 T세포수용체(TCR)는 $CD_{4}$ 또는 $CD_{8}$ 분자와 가까이 연합된 이향체($TCR-{\alpha}{\beta}/TCR-{\gamma}{\delta}$이며 보조 T세포 $CD_{4}$(마우스 $L_{3}T_{4}$)는 수용체와 연합되어 있는반면 억압 T세포 $CD_{8}(Ly+_{2,3})$는 항원수용체와 연합되어 있다. 3. T세포는 Ti-$CD_{3}$(항원/MHC) 복합체를 통한 '항원가교'에 의한 자극(항원인식)과 $CD_{2}$를 통한 비특이경로에 의하여 활성화(분화증식)된다. 비특이경로를 통한 활성경로에서 T세포($CD_{4}$ 및 $CD_{8}$)가 활성화되기 위하여는 보조T세포가 생산하는 IL-2을 요구하며 IL-2의 자극으로 분화증식된 $CD_{8}$는 세포독성능을 나타내지만 $CD_{4}^{+}$는 여전히 세포독성능을 나타내지 못한다. 4. 보조T세포는 class II MHC분자와 연합된 항원을 식별하는 반면 세포독성T세포는 class I MHC 분자와 연합된 항원을 식별한다. 5. 림파구 매개성 세포독성은 접촉(conjugati-on), 탈분극(depolarization), 용해계획(progra-mming), 용해(lysis) 및 재순환(recycling)의 단계를 거쳐 진행된다. 6. 표적세포살해매체로는 perforin / PFP / cy-tolysin, lymphopores, lymphotoxins, protone, cytolytic enzymes가 알려졌으며 세포독성작용은 이들 이외에도 여러 가지 매체를 통한 복합작용으로 추정된다. 7. CTL 매개성 표적세포의 주요 대사변화는 actomyocin ATPase의 증가, phosphocreatine과 ATPase의 소모, ATP 의존성 $Na^{+}/K^{+}$ 펌프작용의 중지, ATP 의존성 $Ca^{2+}$ 유출감소 및 세포내 축적이 관찰된다. 8. $Ca^{2+}$의 축적으로 세포막 교질 침투손상을 주어 수분의 유입을 증가시킴으로써 수포형성, 핵붕괴, 사립체팽화 및 정상세포 구조상실(Zeiosis)이 있다. 결론적으로 CTL 매개성 세포독성작용은 PFP, LT, TNF, 유사 TNF / LT 및 기타 매체를 통한 복합작용이며 세포살해기전은 지속적 대사소모와 정형적 세포구조(핵 및 세포질)의 파괴에 의한 것이다.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.329-334
• /
• 2008

Background: Percutaneous cardiopulmonary support. (PCPS) has the potential to rescue patients in cardiogenic shock who might otherwise die. PCPS has been a therapeutic option in a variety of the clinical settings such as for patients with myocardial Infarction, high-risk coronary intervention and postcardiotomy cardiogenic shock, and the PCPS device is easy to install. We report our early experience with PCPS as a life saving procedure in cardiogenic shock patients due to acute myocardial infarction. Material and Method: From January 2005 to December 2006, eight patients in cardiogenic shock with acute myocardial infarction underwent PCPS using the CAPIOX emergency bypass system($EBS^{(R)}$, Terumo, Tokyo, Japan). Uptake cannulae were inserted deep into the femoral vein up to the right atrium and return cannulae were inserted into the femoral artery with Seldinger techniques using 20 and 16-French cannulae, respectively. Simultaneously, autopriming was performed at the $EBS^{(R)}$ circuit. The $EBS^{(R)}$ flow rate was maintained between $2.5{\sim}3.0L/min/m^2$ and anticoagulation was performed using intravenous heparin with an ACT level above 200 seconds. Result: The mean age of patients was $61.1{\pm}14.2$ years (range, 39 to 77 years). Three patients were under control of the $EBS^{(R)}$ before percutaneous coronary intervention (PCI), three patients were under control of the $EBS^{(R)}$ during PCI, one patient was under control of the $EBS^{(R)}$ after PCI, and one patient was under control of the $EBS^{(R)}$ after coronary bypass surgery. The mean support time was $47.5{\pm}27.9$ hours (range, 8 to 76 hours). Five patients (62.5%) could be weaned from the $EBS^{(R)}$ after $53.6{\pm}27.2$ hours. (range, 12 to 68 hours) of support. All of the patients who could successfully be weaned from support were discharged from the hospital. There were three complications: one case of gastrointestinal bleeding and two cases of acute renal failure. Two of the three mortality cases were under cardiac arrest before $EBS^{(R)}$ support, and one patient had an intractable ventricular arrhythmia during the support. All of the discharged patients are still surviving at $16.8{\pm}3.1$ months (range, 12 to 20 months) of follow-up. Conclusion: The use of $EBS^{(R)}$ for cardiogenic shock caused by an acute myocardial infarction could rescue patients who might otherwise have died. Successfully recovered patients after $EBS^{(R)}$ treatment have survived without severe complications. More experience and additional clinical investigations are necessary to elucidate the proper installation timing and management protocol of the $EBS^{(R)}$ in the future.

• Journal of Chest Surgery
• /
• v.30 no.1
• /
• pp.34-39
• /
• 1997

Between May, 1994 and December, 1995, 122 adult cardiac surgical procedures requiring cardiopulmonary bypa s were performed at Kang Dong Sacred Heart Hospital, including 18 cases(14.8%) that were associated with preoperative(n:9), intraoperative(n=7), postoperative(n:2) use of an IABP (intra-aortic balloon pump). The reasons for IABP were low cardiac output and PTCA(percutaneous transluminal coronary angioplasty) failure in preoperative period, CPB(cardiopulmonary bypass) weaning difficulty in intraoperative period, and intractable arrhythmia in postoperative period. The mean age of the IABP patients was 61.8 $\pm$ 6.9 years(range, 39 to 75years). The overall hospital mortalities in patients with preoperative and intraoperative IABP insertion were 3 and 42.9% respectively. Two patients with postoperative IABP insertion are alive. The rate of IABP weaning is 66.7% for preoperative group, 85.7% for intraoperative group and 100% for postoperative group . In conclusion, if there were no irreversible myocardial damages, IABP could be used safely and emergently at any perioperative period for hemo ynamic stability, CPB weaning, and to overcome low cardiac output syndrome.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.12
• /
• pp.23-32
• /
• 2016

A single particle crushing test was carried out for recycled aggregates from waste concrete while demolishing various structures. When the recycled aggregates were used for backfill or road subbase materials, load-displacement and crushing characteristics were analyzed. The recycled aggregates with hydrates and aggregates were sorted into 40 mm size (75-40 mm) and 20 mm size (40-20 mm). At initial loading, their irregular surface was closed to and then crushed by loading plate. Such first crushing stage was called 'Surface crushing'. Further loading, some hydrate was crushed and detached from aggregate, and such process repeated several times. This state is called 'hydrate crushing'. The final state is called 'aggregate crushing' in which aggregate crushed and following load suddenly dropped down. As the load increased, such crushing cycle is repeated several times. The shapes of aggregates are round or square, and triangle or long shaped. Depending on their shapes and surface conditions, they crushed in different ways. The 63% of aggregates showed more than 50% load reduction due to aggregate crushing. The 90% load reduction occurred at 15% of aggregates. The 40 mm aggregate crushed at maximum load between 3.05-4.38 kN and 70% of crushed aggregates were less than 20 mm.