• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.319.2-319
• /
• 2002

The main obstacle to high track density in HDD id the structural resonances of the suspension. The most critical mode is sway mode and second torsion mode, when a data is read and written. It is common fact that the effect of two modes is smaller when a thickness is bulky. But the stiffness of suspension is smaller, the slider can follow a disk better. Because these two fact are reciprocal, a compromise is needed. So we investigated another method to improve band width without changing of the thickness of suspension but with changing of the shape. (omitted)

• 대한기계학회논문집A
• /
• 제33권8호
• /
• pp.726-732
• /
• 2009

In many industries, the linear motor replaces the existing framework for linear transportation. Similar to other conventional motors, it is important to minimize the ripple of thrust and to maximize the thrust force of the linear motor. Because the two objectives are associated to each other, the multi-objective design process is necessary considering all objectives. This paper intends to optimize geometric parameters of the linear motor with two design objectives using design of experiments and sequential response surface method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.128-133
• /
• 2002

The main obstacle to high track density in HDD is the structural resonances of the suspension. The most critical mode is sway mode and second torsion mode, when a data is read and written. It is common fact that the effect of two modes is smaller when a thickness is bulky. But the stiffness of suspension is smaller, the slider can follow a disk better. Because these two fact are reciprocal, a compromise is needed. So we investigated another method to improve band width without changing of the thickness of suspension but with changing of the shape. In this paper, we use two method - Sensitivity analysis and SIP using ADS. And we obtained the optimized value close to target value.

• 한국해양공학회지
• /
• 제18권3호
• /
• pp.32-39
• /
• 2004

A design procedure for a ship with minimum total resistance has been developed using a numerical optimization method called SQP(sequential quadratic programming) to search for different optimal hull forms. The frictional resistance has been estimated using the ITTC 1957 model-ship correlation line formula, and the wave resistance has been evaluated using a potential-flow panel method that is based on Rankine sources with nonlinear free surface boundary conditions. The geometry of a hull surface has been modified using B-spline surface patches, during the whole optimization process. The numerical analyses have been carried out for the modified Wilgey hull at three different speeds (Fn=0.25, 0.316, 0.408), and the calculation results were compared.

• 한국전산구조공학회논문집
• /
• 제33권4호
• /
• pp.217-224
• /
• 2020

본 논문에서는 초고층 건물의 철근콘크리트 아웃리거 벽체 개구부의 최적설계를 위한 수학적 최적화 프레임워크를 제시하였다. 전용 유한요소해석 프로그램을 이용하여 아웃리거 벽체를 해석하였으며 깊은 보의 스트럿-타이 거동을 고려하여 개구부를 배치하였다. 최적화를 위해 파이썬 SciPy 라이브러리 중 순차이차계획법(Sequential Quadratic Programming)을 이용하여 제약 경계 최적화를 수행하였다. 최적화에 필요한 미분가능한 연속 함수를 얻어내기 위해 선형 보간법을 사용하였으며, 최적화 프로그램의 효율성을 위해 데이터베이스를 이용하였다. 2변수 최적화의 결과를 탐색 알고리즘의 이동 경로를 통해 살펴본 결과 알고리즘이 최적화된 결과를 효율적으로 찾아냄을 확인하였다. 그리고 개구부의 폭을 모두 같게 설정한 것이 아닌 각각의 개구부의 크기를 개별 변수로 설정하였을 경우 목적함수의 값이 최소화되어 더 우수한 최적화 결과를 도출함을 확인하였다. 또한, 최적화의 과정에 있어 데이터베이스를 이용할 경우 최적화 시간을 효과적으로 단축시킬 수 있음을 확인하였다.

• 한국지반공학회논문집
• /
• 제19권5호
• /
• pp.7-14
• /
• 2003

본 연구의 목적은 계측변위를 이용한 흙막이 벽체의 역해석시 예기치 못한 하중으로 인해 발생한 이상변위의 누적에 의한 오차를 최소화할 수 있는 기법을 개발하는 것이다. 이를 위해 단계별 변위증분으로 목적함수를 구성하고, 목적함수를 최소화시키는 최적화기법으로 직접탐색법중 유용방향법에 의한 순차선형계획법을 도입하여 역해석 프로그램을 개발하였다. 또한, 모형토조실험을 실시하여 측정된 실제변위와 예측변위를 비교$.$분석함으로써 개발된 역해석 프로그램의 신뢰성을 검증하였다.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.8-15
• /
• 2003

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP(sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using B-spline surface patches. The optimization method is applied to Series 60 hull and KCS(KRISO 3600 TEU Container Ship). The obtained results prove that the method is appropriate for preliminary hull form design.

• 해양환경안전학회지
• /
• 제24권4호
• /
• pp.467-474
• /
• 2018

본 연구의 목적은 2가지 선속에서 운항하는 선박의 선형 설계 자동화에 관한 것이다. 가장 기본적인 선박의 형상을 가지는 60계열($C_B=0.6$) 선박을 대상선박으로 선택하여 연구를 수행하였다. 선박 형상의 향상 방향은 저항성능 향상의 관점이며, 특히 선박의 형상과 밀접한 관계를 가지는 조파저항성능을 향상하기 위한 선박 형상 설계 자동화를 수행하였다. 본 연구의 목적을 실현하기 위하여 최적화 기법과 저항 성능을 예측하는 기법 그리고 선형의 형상을 변경하는 기법을 접목하여 선박 형상 설계 자동화 소프트웨어를 개발하였으며, 개발된 소프트웨어를 대상선박에 적용하였다. 최적화 기법으로는 순차이차계획법(sequential quadratic programming method)를 사용하였으며, 조파저항성능을 예측하기 위하여 포텐셜기저 패널법(potential-based panel method)을 사용하였다. 선박 형상의 변경은 가우시안형 수정함수법(Gaussian-type modification function method)를 개발하여 적용하였다. 개발된 소프트웨어를 사용하여 대상선박의 서로 다른 두 가지 선속에 대하여 설계를 수행하고 그 결과를 서로 비교하였다. 그리고 개발된 프로그램의 타당성을 검증하기 위하여 모형시험을 수행하여 구한 실험값과 수치해석을 수행하여 구한 계산값을 서로 비교하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.37-42
• /
• 2003

Fundamental Study for optimizing ship hull form using SQP(sequential quadratic programming) method in a resistance point of view is presented. The Wigley hull is used as an initial hull and numerical calculations are carried out according to various froude numbers. To obtain the ship resistance the wave resistance is evaluated by a Rankine source panel method with nonlinear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of a hull surface is represented and modified by B-spline surface patch. The displacement and the waterplane transverse 2nd moment of inertia of the hull is fixed during the optimization process. And the shp design program called EzHULL is used to draw the lines of the optimized hull form to perform the model test.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.45-51
• /
• 2002

To achieve the lightweight and robust design of a structure, it is requested to design a structure and its control system simultaneously, which is called as the combined optimal design. A constant-cross-sectional area cantilever beam was chosen as an example for the applying the optimum design method. An initial load and a time varying disturbance were applied at the free end of the beam. Sliding mode control was selected due to its insensitiveness to the disturbance compared with other modes. It is known that the sliding mode control is robust to the disturbance and the uncertainty only if a matching condition is met, after giving a switching hyper plane. In this study, the optimum method was used for the design of the switching hyper plane and the objective function of the optimum switching hyper plane was assumed to be the objective one of the control system. The total weight of the structure was treated as a constraint and the cross sectional areas of the beam were considered as design variables, which means a nonlinear programming problem. The sequential linear programming method was applied to solve it. As a result of the optimum design, the effect of attenuating vibrations has been improved obviously. Moreover, lightweight design of the structure became possible from the relationship of the weight of the structure and the control objective function.