• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.16-16
• /
• 1998

로켓의 추진제에는 고체 추진제와 액체 추진제를 사용하는 두 경우로 나눌 수 있는데, 액체 추진제를 사용하는 경우, 액체 연료와 액체 산화제를 다양한 방법으로 연소실내로 분사하게 된다. 이때 사용되는 injector들 중에 impingement type이 있다. 이 type은 injector의 가공이 비교적 용이하고, 혼합성능이 좋기 때문에 LOX/RP-1(Kerosin-based hydrocarbon fuel)을 사용하는 액체 로켓엔진에서 주로 사용되어 왔다. 두 액체 jet의 충돌에 의해 액막이 형성되는데, 이 액막은 가장자리로 갈수록 두께가 얇아지며 액막표면의 파는 충돌점으로부터 멀어질수록 그 진폭의 증가를 이루어 액체의 표면장력과 관성력의 균형을 깨트리며, 이 순간 액막은 rim의 형태로 분열하여 결국에는 액적을 생성하게 된다. 현재까지의 연구내용은 충돌 jet의 형태 laminar jet과 turbulent jet으로 구분된 인젝트에 관해 연구되어왔고, 특히 국내에는 이러한 구분된 충돌 jet의 분열현상에 관한 연구결과가 미흡하다. 동일한 오르피스의 경우에도 laminar jet과 turbulent jet으로 구분되어 지며, 각각의 jet의 형태에 따라 생성되는 액막의 형상 또는 다르게 생성되어 진다. 그러므로 본 연구에서는 두 구분된 jet의 경우의 분열현상을 실험적으로 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.443-443
• /
• 2010

액체 표면을 전극으로 하는 플라즈마 방전은 생물학적 살균, 분해 처리 등에 필요한 UV 및 화학적 활성종의 생성에 유리하여 널리 활용되고 있다. 하지만 그 특성 등에 관한 연구는 액체막의 유동 및 기하학적 구조 상 진단의 제한으로 인하여 아직 미비한 상태이다. 전해질 내 방전은 전극 표면의 기포 막 에 인가되고 그 두께에 따라 변한다. 따라서 본 연구에서는 액상 전해질의 인가 전압 및 점성도를 독립적으로 조절하여 기포 막 크기와 인가 전력간의 관계와 이에 따른 전해질 내 플라즈마의 특성이 음극 글로우 방전임을 밝혔다. 실험에서는 전기 전도도 1.6-3.2 S/m의 NaCl 수용액 전해질에 양극성 전극을 삽입하고 350 kHz의 전압을 인가하여 플라즈마를 발생하였다. 인가된 전압은 230 - 280 V이며 전해질의 점성도는 젤라틴을 첨가하여 1E-4-1.1 kg/m${\times}$sec로 조절하였다. 기포 막의 두께 및 변화는 고속카메라를 통하여 관측하였으며 인가되는 전압 및 전류는 고전압 프로브와 전류 프로브를 통하여 관찰하였다. 기포 막은 전극표면에서 막 비등을 통하여 발생됨을 밝혔다. 인가 전력과 손실 열에너지간의 비율에 따라 기포막은 수축과 확장의 진동을 반복하였으며 전기 유체적 모델을 통하여 기포 막의 동적 거동에 따른 플라즈마에 인가된 전력의 변화를 정량적으로 분석할 수 있었다. 기포 막의 평균적인 두께는 인가 전압과 비례하여 약 $150\;{\mu}m$에서 $200\;{\mu}m$로 증가하였으며 진폭은 점성의 증가 시 약 $50\;{\mu}m$에서 $20\;{\mu}m$로 감소하였다. 순간적인 플라즈마 인가 전력은 평균적인 두께에 따른 평균적인 두께에 대해서는 15 - 20 W의 변화를 보였으나 진폭의 감소 시 17 - 70 W의 보다 큰 폭으로 증가하였다. 이를 통하여 점성도가 큰 조건에서 기포 막의 확장이 억제되어 방전이 유지됨을 알 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.187-200
• /
• 1992

A general scheme is developed to determine the Langrangian motions of water particles by the Eulerian velocity at their mean positions by using Taylor's theorem. Utilizing the Stokes finite-amplitude wave theory, the orbital motions and the mass transport velocity including the effects of higher-order wave components are determined. The fifth-order approximation of orbital motion gives very good predictions of actual water particle motion in Stokes fifth-order wave theory except near the free-surface. The fifth-order theory predicts the mass transport velocity less than that given by the existing second-order theory over the whole water depth.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.708-716
• /
• 1989

The purpose of this study is to investigate the breakup mechanism of a liquid jet in a coaxial air flow. By using the high speed camera, measured were the instantaneous change of the wave length, amuplitude of disturbance, propagation velocity of wave and breakup length, and the relationships between those data were examined. The shape of the surface of the liquid jet appeared to be rather complicated and irregular. The growth rate of disturbance was not constant, and was changed at the moment of 3ms prior to the disintegration of the liquid jet. Simultaneously at this moment, the propagation velocities of the sequential waves were reversed and the wave length was rapidly decreased.

• Progress in Medical Physics
• /
• v.24 no.1
• /
• pp.61-67
• /
• 2013

In this study, we developed and evaluated the patient respiration training method which can help to avoid the problems for the limitation of RGRT applicable patient cases. By using the MEMS (micro-electro-mechanical-system) acceleration sensor, we measured movement of motion phantom. We had compared the response of MEMS with commercially introduced real time patient monitoring (RPM) system. We measured the response of the MEMS with 1 dimensional motion phantom movement for 2.5, 3.0, 3.5 second of period and the 2.0, 3.0, 4.0 cm of the amplitudes. The measured period error of the MEMS system was 0.6~6.0% compared with measured period using RPM system. We found that the shape of MEMS signals were similar with RPM system. From this study, we found the possibility of MEMS as patient training system.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.1
• /
• pp.5-13
• /
• 2008

Purpose: This review article was written to investigate what kind of forces are acting on the contact lens fitted on the cornea and its subsequent motion. Methods: A capillary action-induced force develops in the tear layer between the lens and cornea, which leads to the restoring force due to difference in layer thickness according to lens rotation. The characteristics of the lens movement can be determined by the various factors such as friction between eyelid and lens, acceleration force based on blinking and the restoring force incorporated with the viscous damping force. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped motion of lenses. The model predicts the time dependence of lenses during and after the blink varying the BC, blink period and eyelid pressure. Results: It was found that both the blink period and lid pressure increases the movement increases because of the enhanced lid friction. As the BC increases the viscous damping reduces due to the lacrimal layer's increase which resulted in the enhanced lens motion. After blink the lens illustrates the damped oscillation because of the restoring force by the increased lacrimal layer thickness and reduced viscous resistance. The time for the lens to return to the equilibrium shortens as the BC increase because of the resistance reduction. Conclusions: The movement of the contact lens is governed by the characteristics of the lacrimal layer between the lens and cornea as well as the lid blink.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.729-736
• /
• 2010

In this study, a magnetic stimulation (MS) device with controllable pulse forming technology and pulse shape (MS) is described. The MS device uses an IGBT with appropriate snubbers to switch coil currents up to 6 kA, enabling pulse forming technology control from 5 s to over 100 s. The induced electric field pulses use 2% - 34% less energy and generate 57% - 67% less coil heating compared to matched conventional cosine pulses. MS is used to stimulate rhesus monkey motor cortex in vivo with pulse forming technology of 20 to 100 s, demonstrating the expected decrease of threshold pulse amplitude with increasing pulse forming technology. The technological solutions used in the MS prototype can expand functionality, and reduce power consumption and coil heating in MS, enhancing its research and therapeutic applications.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.3
• /
• pp.173-184
• /
• 2005

A capillary action-induced tension develops in the tear layer between the contact lens and cornea, which leads to the restoring force due to difference in the layer thickness between either upper and lower or left and right side of the lens when it is displaced off the equilibrium position as a result of blinking. Suppose the lens was displaced a certain distance from the equilibrium position, lens starts to oscillate toward the equilibrium position with the decreasing amplitude due to the restoring force as well as the velocity dependent viscous damping force in the tear layer. A mathematical model which consists of the differential equations and their numerical solution was proposed to analyze the damped oscillations of lenses. The model predicts the time dependence of lenses after the blink varying the various parameters such as Be, diameters, masses and positions displaced from equilibrium. As the Be and mass of lens increases the rate of amplitude reduction decreases, which requires a more time for the lens to return to the equilibrium position. It seems that varying the lens' displacement and diameters affect the lens' motion very little.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.707-722
• /
• 1992

Fracture of a cutting tool is one of the most serious problems in machining systems. Therefore, several methods have been proposed so far to detect cutting tool fracture. However, most of them have some problems from the viewpoint of practical applications. In this study, the feasibility of using acoustic emission and cutting force signals for the detection of massive tool breakages as well as small fracture of cutting tools were investigated. Turning experiments were performed using conventional carbide inset tools under realistic cutting conditions and the SM45C steel and heat treated SM45C steel were used as a workpiece. And the sensitivities of the AE and cutting force signals to the fracture of cutting tools were illustrated. Finally, a detection algortithm for the fracture of cutting tools was developed through the analysis of these dual signals in the several types of tool fracture.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1845-1851
• /
• 2007

Background noise and room reverberation are two causes of degradation in speech in listening situations. Many algorithms developed to enhance reverberant speech. In this paper we propose a dereverberation method for enhancement of speech using modified the linear prediction(LP) residual in reverberant room condition. The proposed dereberberation method based on the fact that the signification excitation of the vocal tract system takes place at the instant of glottal closure in voiced speech. Our method used delay information form each sensor, and we need reverberant signals from 3 sensors. We obtain a new LP residual signal using modified IP residual combination which derived form weighting of the LP residual and the Hilbert transform of LP residual. The nature of the coherently added Hilbert envelop has several large amplitude spikes because of the effects of noise and reverberation. This residual of the clean speech is used to excite the time-varying all-pole filter to obtain the enhanced speech. We achieved simulation of proposed algorithm for performance analysis in reverberation environment. The proposed algorithm improves substantially the quality of reverberant speech.