• Clean Technology
• /
• v.23 no.2
• /
• pp.163-171
• /
• 2017

Currently, researches on recycling and reuse of waste energetic materials have recently gained a great attention from advanced countries due to ever tightening environmental regulations. In this study, as a part of a recycling technology, the experiments and dynamic simulation of simulated moving bed (SMB) process were performed to efficiently separate TNT and RDX from their mixture, which are main components of ammunition. In order to determine the operation zone of SMB process, the retention times of TNT and RDX were measured using HPLC at different flow rates and the adsorption equilibrium of each component was obtained by using a moment method. According to the adsorption equilibrium and the triangle theory of SMB process, four operation points were determined and separation experiments were carried out by the SMB process using the solvent consisting of acetonitrile and water. Two different mixing ratios (6:4 and 1:1) of acetonitrile and water were chosen for the experiment due to the great impact of mixing ratio of the solvent on separation. The performance of SMB process was evaluated by purity, recovery, productivity and solvent consumption. Pure TNT and RDX were successfully obtained from the SMB process and the dynamic simulation for the SMB process agreed well with the experimental results. Therefore, the dynamic model could be applied for predicting the dynamic behavior of the SMB process and designing a large scale SMB process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1A
• /
• pp.45-52
• /
• 2009

In conventional structural design, deterministic optimization which satisfies codified constraints is performed to ensure safety and maximize economical efficiency. However, uncertainties are inevitable due to the stochastic nature of structural materials and applied loads. Thus, deterministic optimization without considering these uncertainties could lead to unreliable design. Recently, there has been much research in reliability-based design optimization (RBDO) taking into consideration both the reliability and optimization. RBDO involves the evaluation of probabilistic constraint that can be estimated using the RIA (Reliability Index Approach) and the PMA(Performance Measure Approach). It is generally known that PMA is more stable and efficient than RIA. Despite the significant advancement in PMA, RBDO still requires large computation time for large-scale applications. In this paper, A new reliability-based design optimization (RBDO) method is presented to achieve the more stable and efficient algorithm. The idea of the new method is to integrate a response surface method (RSM) with PMA. For the approximation of a limit state equation, the moving least squares (MLS) method is used. Through a mathematical example and ten-bar truss problem, the proposed method shows better convergence and efficiency than other approaches.

• Journal of The Korean Association of Information Education
• /
• v.20 no.3
• /
• pp.243-254
• /
• 2016

This study has produced a checker of the shortest path search problem with a total of 19 questions as a web-based computer evaluation based on the 'TRAFFIC' questions of PISA 2012. It is because the computer has been settled as an indispensable and significant instrument in the process of solving the problems of everyday life and as a media that is underlying in assessment. Therefore, information gifted students should be able to solve the problem using the computer and give clear enough commands to the computer so that it can perform the procedure. In addition, since it is the age that the computational thinking is affecting every sectors, it should give students new educational stimuli. The relationship between the rate of correct answers and the time took to solve the problem through the shortest route search process showed a significant correlation the variable that affected the problem solving as the difficulty of the question rises due to the increase of nodes and edges turned out to be the node than the edge. It was revealed that information gifted students went through algorithmic thinking in the process of solving the shortest route search problem. And It could be confirmed cognitive characteristics of the information gifted students such as 'ability streamlining' and 'information structure memory'.

• Journal of Technology Innovation
• /
• v.21 no.1
• /
• pp.85-108
• /
• 2013

This paper introduces a new qualitative measurement indicator, Relatively Rank-normalized Impact Factor ($R^2nIF$) that can overcome drawbacks of the existing research performance measures. With the help of this innovative indicator, this study analyzes and compares the quality of research papers across countries and National Science Indicators (NSI) standard academic fields. The development of an improved bibliometric indicator for evaluating the quality of research papers and disentangling the "international" dimension of research performance will be of interest to academics and practitioners alike.

• Korean Journal of Cognitive Science
• /
• v.21 no.4
• /
• pp.627-653
• /
• 2010

The present study proposes and examines a new type of multiple-choice math test. In this format, the options are the intermediate derivatives of the math problem solution process rather than the final answers. This idea originates from the studies on the effect of worked-out examples. In these studies, it has been shown that students learn better when they were presented with worked-out examples than when presented with final answers by themselves. In line with these findings, we introduced the intermediate derivatives of the solution process as the options of multiple-choice items so that the test-taker will have a chance to examine the solution process. The test was implemented as a computerized test in which students can solve problems in a short answer format, and then pick a multiple-choice option which appears when requested. The experimental group had multiple-choice options which were intermediate derivatives of the solution process, and the control group had the final answers as the options as in most multiple-choice tests. The participants were 6th graders in elementary school. The posttest results revealed that the average score of the experimental group was higher than that of the control group. The results suggest that tests that use intermediate derivatives of the problem solution process as options can be used as learning tools in the classrooms. Finally, directions for further studies were discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.461-467
• /
• 2003

This paper proposes the method of mobility implementation for location searching in the intelligence wireless ATM networks that expand and apply standard broadband signaling capabilities, and analyze the performance based on the numerical algorithm. The existing B-ISDN UNI protocol stack demands the location search mechanism to determine the location of mobile terminal in the wireless ATM networks because it use single protocol through the fixed PTP interface or PTM interface that don't support terminal mobility. The proposed method make possible the dynamic mobility at a part of wireless access by minimizing the signaling load without a falling-off in system performance by using the intelligence network technology according to the expansion of ATM and B-ISDN signaling integration based on the fixed networks. We implemented the performance analysis by MFC modeling based on numerical algorithm, and realized the efficiency of expenses by carrying out the comparative signaling performance evaluation to measure the relative gains of location search service in the intelligence wireless ATM system. The obtained results have the flexibility to operate in the public B-ISDN network environment without a change of existing B-ISDN/ATM NNI signaling reference to support the wireless ATM access system, and can easily expand to correspond to terminal mobility and various multimedia services in the next broadband PCS.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.29-41
• /
• 2007

Structural design, like other complex decision problems, involves many trade-offs among competing criteria. Although mathematical programming models are becoming increasingly realistic, they often have design limitations, that is, there are often relevant issues that cannot be easily captured. From the understanding of these limitations, a decision-support system is developed that can generate some useful alternatives as well as a single optimum value in the optimization of steel frame structures. The alternatives produced using this system are "good" with respect to modeled objectives, and yet are "different," and are often better, with respect to interesting objectives not present in the model. In this study, we created a decision-support system for designing the most cost-effective moment-resisting steel frame structures for resisting lateral loads without compromising overall stability. The proposed approach considers the cost of steel products and the cost of connections within the design process. This system makes use of an optimization formulation, which was modified to generate alternatives of optimum value, which is the result of the trade-off between the number of moment connections and total cost. This trade-off was achieved by reducing the number of moment connections and rearranging them, using the combination of analysis based on the LRFD code and optimization scheme based on genetic algorithms. To evaluate the usefulness of this system, the alternatives were examined with respect to various design aspects.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.95-103
• /
• 2023

This paper proposes an artificial intelligence convergence education program for teaching the main concept and principle of Support Vector Machines(SVM) at elementary schools. The developed program, based on Jeju's natural environment theme, explains the decision boundary and margin of SVM by vertical and parallel from 4th grade mathematics curriculum. As a result of applying the developed program to 3rd and 5th graders, most students intuitively inferred the location of the decision boundary. The overall performance accuracy and rate of reasonable inference of 5th graders were higher. However, in the self-evaluation of understanding, the average value was higher in the 3rd grade, contrary to the actual understanding. This was due to the fact that junior learners had a greater tendency to feel satisfaction and achievement. On the other hand, senior learners presented more meaningful post-class questions based on their motivation for further exploration. We would like to find effective ways for artificial intelligence convergence education for elementary school students.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.383-389
• /
• 2011

At the design stage, it is very important to know the ship maneuvering characteristics from the view point of ship performance and for the safety of navigation. IMO only gives some criteria for ships in full load even keel condition. However, the ship generally is operated not only in full load condition but also in half load condition or ballast condition. Therefore we must estimate the ship maneuvering in different loading condition to ensure that the ship will satisfy with IMO rules and navigate safely in every condition. In this paper, we have investigated the maneuvering characteristics of a ship by simulation and experiments with real ship. By comparing with the results of simulation, the real ship tests conform with simulation test and previous researches. Therefore, the method base on real data is well done to estimate the ship maneuvering in different loading conditions. The change of ship's manoeuverability accoriding to ship's operation conditions was estimated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.570-576
• /
• 2010

This paper can be used for GPS air navigation study on integrity monitoring algorithm as, the projected horizontal plane using GPS pseudorange residuals for fault detection satellites were suspected. Failure to remove the detected suspicious satellite, compare with threshold which is calculated using satellite deployment (PDOP) and determine whether the failure is presented. The theory that horizontal projection of the satellite failure residuals greater than residual of normal satellite is proved mathematically. Comparison with horizontal projection residuals are likely to malfunction in the satellite were presented. To evaluate the proposed algorithm, bias fault insert into GPS pseudorange, and compare with conventional parity space method about fault detection and isolation capability.