• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.332-350
• /
• 2019

Zonal hydrographic section measurements at $39.7^{\circ}N$ were conducted between $129.0^{\circ}E$ and $131.3^{\circ}E$ from August 7 to 25 in 2017 using an underwater glider. The glider traveled about 440 km for about 18 days along the 106 line of the regular shipboard measurements in the National Institute of Fishery Science (NIFS) and obtained twice a hydrographic section with high horizontal resolution. Even under the strong East Korea Warm Current with maximum speed of 0.8 m/s across the section, the glider successfully maintained the designated path within an RMS distance of 400 m. By comparing with the NIFS shipboard hydrographic section, it is confirmed that high spatial resolution measurements obtained from a glider were necessary to properly observe front and eddy variability in the East Sea where a typical spatial scale is smaller than the open oceans. From the glider section measurements, a new lens-shaped eddy was found in the thermocline. The lens-shaped anticyclonic eddy had 10~13 km in horizonal width and about 200 m in height like a typical submesoscale eddy resided within the thermocline, which was firstly named as Korea intrathermocline eddy (Keddy). The Keddy has the distinguishing characteristics of a typical intrathermocline eddy, such as a central core with anomalously weak stratification, a convex shaped lens bounded by the stratification anomaly, an interior maximum of velocity at 170 m, no surface appearance of the geopotential field, a small or comparable horizontal width relative to the first baroclinic Rossby radius of deformation, and the Rossby nubmer of 0.7.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.1
• /
• pp.1-12
• /
• 2021

To investigate the effect of freshwater discharge on the seawater circulation in the semi-closed harbor, a 3-D hydrodynamic model was applied to the International Ferry Terminal (IFT). The model run is conducted for 45 days (from May 15 to June 30, 2020), and the reproducibility of the model for time-spatial variability of current velocity and salinity was verified by comparison with model results and observation data. There are two sources of freshwater towards inside of the IFT: Han River and water reservoir located in the eastern part of IFT. In residual current velocity results, the two-layer circulation (the seaward flow near surface and the landward flow near bottom)derived from the horizontal salinity gradient in only considering the discharge from a Han River is more developed than that considering both the Han River and water reservoir. This suggests that the impact of freshwater from the reservoir is greater in the IFT areas than that from a Han River. Additionally, the two-layer circulation is stronger in the IFT located in southern part than Incheon South Port located in northern part. This process is formed by the interaction between tidal current propagating into the port and freshwater discharge from a water reservoir, and flow with a low salinity (near 0 psu) is delivered into the IFT. This low salinity distribution reinforces the horizontal stratification in front of the IFT, and maintains a two-layer circulation. Therefore, local sources of freshwater input are considered to estimate for mass transport process associated with the seawater circulation within the harbor and It is necessary to perform a numerical model according to the real-time freshwater flow rate discharged.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1199-1213
• /
• 2011

Slurry type shield would be very effective for the tunnelling in a sandy ground, but low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. As results, larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0~1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.

• Journal of radiological science and technology
• /
• v.37 no.4
• /
• pp.295-305
• /
• 2014

This study is to provide accurate information as medical imaging equipment to check for the presence of body disease US equipment. We investigated the status of medical US equipment performance in Daegu and criteria US phantom (ATS-539) for US equipment performance measurements. The results in this study, 1. US phantom measurement results: The test passed rate were 88.6% and the failed rate were 11.4%. 2. The difference between the group of mean and the pass/failed groups were statistically significant. Focal zone and 4 mm functional resolution in the two items that are not present the passing standard. 3. The difference was statistically significant number of years and used equipment and pass the failed equipment (4.13 vs 7.25 years). We investigated the performance status of US equipment used in the clinical area in Daegu. The basis for the two items are not present this proposed passing standard. Equipment performance was associated with the number of years of using US equipment. It is necessary to maintain the best performance of the equipment phantom measurements for performance testing of US equipment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.51-57
• /
• 2015

When an implant-supported maxillary full-arch fixed prosthesis is planned for patients with the horizontal and vertical bone resorption induced by periodontal disease, it is necessary to consider the masticatory function, esthetics and phonetics when placing implants. For this reason, thorough clinical and radiological diagnosis is necessary. Extensive bone and soft tissue grafting may be required as well. Since there is no clear guideline for proper number of implants, segment or splinting of substructure and method of retaining prosthesis, these should be considered during diagnostic process. This clinical report describes a patient who has experienced several tooth extractions and periodontal treatment due to severe periodontitis on maxilla and mandible. With bone and soft tissue graft before dental implant placement, the patient have satisfactory result in esthetic and functional aspect with the implant-supported maxillary full-arch fixed prosthesis opposing mandibular natural dentition.

• Journal of Korean Academy of Nursing
• /
• v.16 no.1
• /
• pp.89-104
• /
• 1986

복잡한 사회문제해결에 유용한 접근방법의 하나인 계층분석과정은 수학자인 사티(Saaty)가 개발한 것으로서 이미 사회과학의 여러 분야에 적용되고 있다. 본 논문의 목적은 이 계층분석과정을 간호교육과 관련된 문제에 적용해 봄으로써 이 방법이 실제 문제해결을 위한 유용한 접근방법이 될 수 있는가를 고찰해 보는데 있다. .현대사회문제들은 다양한 관련요소, 그 요소들간이나 다른 문제들과의 복잡한 상호관계, 다수의 의사결정자의 참여, 무한한 대안, 문제의 결과에 대한 불확실성 등으로 인하여 단순한 모델이나 간단한 논리적 혹은 직관적인 판단에 준하여 일시에 해결하기 어려운 경우가 많다. 이러한 상황 하에서 문제와 관련된 요소들을 찾아내고 그 요소들을 계층적으로 분석하여 단계적으로 문제해결에 접근하는 계층분석과정을 활용함으로써 사회과학분야의 문제해결에 유용한 수단이 될 수 있다. 또한 문제와 관련된 요소를 규명하고 계층적으로 분화하는 과정에서 그 문제에 대한 보다 명확한 이해, 분석 및 현상의 흐름을 더 잘 인해하게 된다. 계층분석과정은 1) 계층구조의 설정 2) 구성요소들의 중요도 측정 3) 중요도에 따른 우선 순위의 산정 4) 우선 순위의 일관성 검토과정으로 요약된다. 본 논문에서는 이러한 과정을 통하여 미국 간호계에서 심각한 문제로 대두되어온 기본교육제도상의 쟁점(Issue of Entry into Practice）에 대한 문제 해결책이 마련되는지를 시도하였다. 즉, 기본교육 제도에 영향을 미칠 수 있는 요인들을 규명하여 계층화하고 계층내에 위치하는 구성요소들의 수평적 관계와 계층간의 수직적 관계를 체계적으로 검토하여 간호교육의 미래를 예측해 보았다. 간호교육제도에 영향을 미칠 수 있는 주요 요인들의 계층화는 거시적 환경차원(factors), 관련 이해자 집단차원(actors), 이해자 집단의 목표차원(objectives), 목표달성을 위한 정책차원(Policies), 그리고 간호교육제도의 미래를 예견한 시나리오(scenario)로 이루어졌다. 각 계층을 따라 단계적으로 중요도를 비교하여 최종적으로 각 시나리오의 우선순위 중요도(priority weight)를 구하였다. 각 시나리오의 우선순위 중요도를 간호교육과 관련된 4가지 차원들(학생, 교수, 교육기관, 직업)을 구성하고 있는 특성들에 가중하여 결과를 해석 하였다. 간호교육의 미래에 정치적(55%)과 경제적(25%) 요인이 가장 강한 영향을 미치고, 관련자중에서는 병원(38%) 의사(33%) 그리고 정부(23%)의 순으로 영향을 미친다고 분석되었다. 의외로 간호원 자신들은 큰 영향력이 없는 것으로 보여졌다. 4개의 시나리오 중에서는 그 우선순위 중요도가 현상유지(33%) 자발적4년제(32%), 강제 4년제(19%), 그리고 2~3년제의 우위(18%) 순으로 나타났다. 최종 시나리오 결과를 요약하면 1) 전체 학생수는 감소하나 양질의 간호학생수는 증가하며 2) 박사학위를 소지한 간호학 교수 및 전체 교수의 수가 증가할 것이다. 3) 전체 간호교육기여의 수는 약간 줄 것이며 그중 4년제 기관이 증가하고 반면에 2~3년제의 기관은 감소할 것이다. 4) 전문간호원이 되기 위한 입학용이도에는 별차이가 없겠으나 간호원들의 보수, 지위 및 자율성이 증가하면서 전반적인 간호의 질이 향상될 것이다. 계층분석과정의 적용으로 미국 간호교육계의 가까운 미래를 위와 같이 예견하여 보았으나 이 과정은 예견 뿐 만 아니라 일반적인 의사결정이나 문제 해결의 도구이외에도 복잡한 사회문제의 본질을 분석, 이해함으로써 보다 정화한 정책문제를 규정하는 데에도 유용할 것이다.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.38-46
• /
• 2010

In this paper, an autonomous surveillance-tracking system for Workers monitoring basing on the stereo vision scheme is proposed. That is, analysing the characteristics of the cross-axis camera system through some experiments, a optimized stereo vision system is constructed and using this system an intelligent worker surveillance-tracking system is implemented, in which a target worker moving through the environments can be detected and tracked, and its resultant stereo location coordinates and moving trajectory in the world space also can be extracted. From some experiments on moving target surveillance-tracking, it is analyzed that the target's center location after being tracked is kept to be very low error ratio of 1.82%, 1.11% on average in the horizontal and vertical directions, respectively. And, the error ratio between the calculation and measurement values of the 3D location coordinates of the target person is found to be very low value of 2.5% for the test scenario on average. Accordingly, in this paper, a possibility of practical implementation of the intelligent stereo surveillance system for real-time tracking of a target worker moving through the environments and robust detection of the target's 3D location coordinates and moving trajectory in the real world is finally suggested.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.7
• /
• pp.619-628
• /
• 2000

Abstract Perspective views provide a powerful depth cue and thus aid the interpretation of complicated images. The main drawback of current perspective volume rendering is the long execution time. In this paper, we present an efficient perspective volume rendering algorithm based on coherency between rays. Two sets of templates are built for the rays cast from horizontal and vertical scanlines in the intermediate image which is parallel to one of volume faces. Each sample along a ray is calculated by interpolating neighboring voxels with the pre-computed weights in the templates. We also solve the problem of uneven sampling rate due to perspective ray divergence by building more templates for the regions far away from a viewpoint. Since our algorithm operates in object-order, it can avoid redundant access to each voxel and exploit spatial data coherency by using run-length encoded volume. Experimental results show that the use of templates and the object-order processing with run-length encoded volume provide speedups, compared to the other approaches. Additionally, the image quality of our algorithm improves by solving uneven sampling rate due to perspective ray di vergence.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.27-38
• /
• 2009

The multi-level profile system is designed to measure the vertical profile of $H_2O$ and $CO_2$ concentrations in the surface layer to estimate the storage effects within the plant canopy. It is suitable for long-term experiments and can be used also in advection studies for estimating the spatial variability and vertical gradients in concentration. It enables the user to calculate vertical fluxes of water vapor, $CO_2$ and other trace gases using the surface layer similarity theory and to infer their sources or sinks. The profile system described in this report includes the following components: sampling system, calibration and flow control system, closed path infrared gas analyzer(IRGA), vacuum pump and a datalogger. The sampling system draws air from 8 inlets into the IRGA in a sequence, so that for 80 seconds air from all levels is measured. The calibration system, controlled by the datalogger, compensates for any deviations in the calibration of the IRGA by using gas sources with known concentrations. The datalogger switches the corresponding valves, measures the linearized voltages from the IRGA, calculates the concentrations for each monitoring level, performs statistical analysis and stores the final data. All critical components are mounted in an environmental enclosure and can operate with little maintenance over long periods of time. This report, as a practical manual, is designed to provide helpful information for those who are interested in using profile system to measure evapotranspiration and net ecosystem exchanges in complex terrain.

• The Korean Journal of Ecology
• /
• v.27 no.1
• /
• pp.49-55
• /
• 2004

To verify growth properties of Carex kobomugi, above and belowground parts of C. kobomugi were surveyed on coastal sand dune at Sinduri, Choongnam Province from April, 2001 to June 2003. The results were the same as follows. In coastal sand dune, C. kobomugi followed Elymus mollis from mean high tide line. Density of C. kobomugi was the highest at unstable sand dune and 150 plants/㎡. And rates of flowering plant were 70% at unstable area and 10% at stable area. C.kobomugi is thus plant that adapted to unstable sand dune. Shoot distributed irregularly. The rhizome of C. kobomugi gradually decreased with the soil depth in unstable area, but mainly distributed to 20 ㎝ depth. New rhizome could be generated from the rhizome which was below 150 ㎝ depth or 5 years old. The number and length of new rhizome were related to biomass of previous year's shoot. That was, shoots which were below 0.5 and over 3 g/shoot in dry weight generated 1 and 5 rhizomes, respectively. And the mean lengths of rhizome from small (below 0.5 g) and large (over 3.0 g) shoots were 13.0 ㎝ and 57.6 ㎝, respectively.