• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.229-237
• /
• 1998

We grew the hexagonal GaN films on (100) Si and (00.1) sapphire substrates in the temperature range of $300~730^{\circ}C$ by the direct reaction between thermally ionized N-source and thermally evaporated Ga-source. The GaN growth rates are increased at the initial stage of GaN formation and it was saturated to some values by the coalescence of each crystallites. The oxygen signal was observed in XPS spectra for all the GaN films grown in this work, especially low- temperature grown GaN film may due to incorporation of the residual oxygen in the growth chamber. The surface of low-temperature and shorter time grown films covered only Ga-droplets. however, with increasing the both substrate temperature and the growth time GaN is growth to crystallites. and coalescence to ring-type crystallites. With sufficient supply of N-source, they were changed to platelets. In the PL spectrum measured at 20 K, we observed the impurity related emission at 3.32eV and 3.38eV.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.80-80
• /
• 2009

패키징 구조의 발전이 점차 중요한 문제로 대두되어, 칩의 집적 기술의 발전에 따라 실장기술에서도 고속화, 소형화, 미세피치화, 고정밀화, 고밀도화가 요구되고있다. 최근 선진국을 중심으로 전자 전기기기 및 부품의 실장기술에서도 환경 친화적인 기술을 요구함에 따라, 저에너지 공정 및 무연 실장 기술에 대한 연구가 활발하게 진행되고 있다. 기존의 SOP(Small Out-line Package), QFP(Quad Flat Package) 등은 소형화, 다핀화, 고속화, 실장성에 한계가 있기 때문에, SMT(Surface Mount Technology) 형식으로 된 BGA(Ball Grid Array)가 휴대형 전화를 비롯한 기타 전자 부품 실장에 널리 사용되고 있다. BGA ball shear 법은 BGA 모듈의 생산 및 취급 중에 발생할지도 모르는 기판에 수평으로 작용하는 기계적인 전단력에 BGA solder ball이 견딜 수 있는 정도를 측정하기 위해 사용되는 시험법이다. 전단 시험에 의한 전단 강도의 측정 외에 전기전도도 측정, 파면 관찰, 이동거리(displacement), 유한요소 해석법 등을 병행하여 시험법의 신뢰성 향상에 대한 연구가 이루어지고 있다. 본 실험에서는 지름이 $500{\mu}m$인 Sn-3.5Ag 솔더볼을 이용하여 세라믹 기판을 접합하여 BGA 패키지를 완성하였다. 상부 기판에 솔더볼을 정렬시켜 리플로우 방법으로 접합 한 후 솔더볼이 접합된 상부 기판과 하부 기판을 접합 하여 시편을 제작하였다. 접합된 시편들은 $150^{\circ}C$에서 0~800시간 열처리를 실시하였고, 열처리를 하면서 각각 $3{\times}10^2A/cm^2,\;5{\times}10^3A/cm^2$의 전류를 인가하였다. 시편들을 전단 시험기를 이용하여 솔더볼의 기계적 특성 평가를 하였으며, 계면 반응을 관찰하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.298-305
• /
• 1984

The competitive relationship between orchardgrass (Dactylis glomerata L.) and ladino clover (Trifolium repens L.) was studied under aerial and soil partitions and N, P fertilizer combinations. Orchardgrass and ladino clover were grown in field with one of non competition, shoot competition only, root competition only, full competition and competition between same species. Under basal application of K fertilizer N and P were applied in treatment combinations of blank, N only (l5kg/10a), P only (l5kg/10a), and both NP at planting and each cutting. The forage yield in mixture was between yield of pure orchard grass stand and the 'expected yield', which was a mean of both pure stands. The forage yield in pure ladino was the lowest. During the experiment there was a progressive decline in clover yield either pure stand or mixture. Since orchardgrass was 'over-compensated' to low-yielding clover, the yield of mixture was more than non competition. Orchard grass was more competitive than ladino clover as seasons advanced. The aggressivity of orchardgrass was higher in root competition than in shoot competition comparing to clover. Nitrogen fertilizer increased orchardgrass yield, while phosphate did ladino clover yield and root weight of both species. But the additional effect of P to N was not significant in dry weight and LAI.

• Polymer(Korea)
• /
• v.31 no.5
• /
• pp.393-398
• /
• 2007

We studied the mechanism of liquid crystal alignment on polyvinylfluorocinnamate (PVCN-F) films which were irradiated by UV using polarized fourier transform infrared (FT-IR) spectroscopy and ultraviolet/visible (UV/Vis) spectroscopy. UV irradiation of PVCN-F films caused decrease of vinylene -C=C- stretching peak area at $1638cm^{-1}$ and shift of conjugated C:0 stretching vibration at $1712cm^{-1}\;to\;1734cm^{-1}$ which is caused by nonconjugated C=O stretching nitration. To study the orientation direction of 5CB liquid crystal (LC) molecules in the liquid crystal cell with PUV irradiation, rubbing treatment or without any treatment on the PVCN-F alignment layer, we used polarized FT-IR dichroism technique. We successfully measured 5CB LC alignment directions, which are perpendicular to the irradiated PUV polarization direction and parallel to the rubbing direction in the liquid crystal cell without using dichroic dyes.

• Nuclear Engineering and Technology
• /
• v.20 no.4
• /
• pp.253-264
• /
• 1988

Our experience of neutron noise analysis in French-type 900 MWe pressurized water reactor (PWR) is presented. Neutron noise analysis is based on the technique of interpreting the signal fluctuations of ex-core detectors caused by core reactivity changes and neutron attenuation due to lateral core motion. It also provides advantages over deterministic dynamic-testing techniques because existing plant instrumentation can be utilized and normal operation of the plant is not disturbed. The data of this paper were obtained in the ULJIN unit 1 reactor during the start-up test period and the statistical descriptors, useful for our purpose, are power spectral density (PSD), coherence function (CF), and phase difference between detectors. It is found that core support barrel (CSB) motions induced by coolant flow forces and pressure pulsations in a reactor vessel were indentified around 8 Hz of frequency.

• Geophysics and Geophysical Exploration
• /
• v.5 no.1
• /
• pp.33-45
• /
• 2002

It was necessary to devise new techniques to overcome and enhance the resolution limits of traveltime tomography. Waveform inversion has been one of the methods for giving very high resolution result. High resolution image could be acquired because waveform inversion used not only phase but amplitude. But waveform inversion was much time consuming Job because forward and backward modeling was needed at each iteration step. Velocity-stress method was used for effective modeling. Resolution limits of imaging methods such as travel time inversion, acoustic and elastic waveform inversion were investigated with numerical models. it was investigated that Resolution limit of waveform inversion was similar tn resolution limit of migration derived by Schuster. Horizontal resolution limit could be improved with increased coverage by adding VSP data in cross hole that had insufficient coverage. Also, waveform inversion was applied to realistic models to evaluate applicability and using initial guess of travel time tomograms to reduce non-linearity of waveform inversion showed that the better reconstructed image could be acquired.

• Journal of Adhesion and Interface
• /
• v.9 no.4
• /
• pp.30-33
• /
• 2008

Two polymeric interfaces with single component homo-polymers were prepared to control the orientation of block copolymer thin-film nanostructures. Poly(4-acetoxy styrene) (OH-PAS) and poly(4-methoxy styrene) (OH-PMS) which have the average chemical composition of polystyrene-block-poly(methyl methacrylate) (PS-b-PMMA) were precisely synthesized through nitroxide-mediated radical polymerization. After dehydration reactions between above polymers and SiOx layers of silicon wafers, the polymer-modified interface induced partial (30%) vertical orientation of PS-b-PMMA thin film in the case of OH-PMS and wholly parallel orientation in the case of OH-PAS. Chemical compositions of polymeric interface layers are regarded as the key parameter to control the orientation of nanostructures of block copolymer thin film.

• Journal of Korean Association for Spatial Structures
• /
• v.12 no.1
• /
• pp.99-108
• /
• 2012

Vibration control devices are classified into passive, semi-active and active device. TMD(Tuned Mass Damper) is one of the passive control device that is mainly used to reduce vibration level of building structure and bridge structure. In this study, the application of passive tuned mass damper(TMD) to seismic response control of dome structures has been investigated. Because star dome structure has primary characteristics of dome structures, star dome structure was used as an example dome structure that is subjected to horizontal or vertical seismic loads. From this numerical analysis, it is shown that seismic response are influenced by vibration modes and it is reasonable to install TMD to the dominant points of each mode. And it is found that the passive TMD could effectively reduce the seismic responses of dome structure.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.253-257
• /
• 2010

최근 들어 이상 강우 현상으로 인한 기록적인 집중 강우와 더불어 토지 이용 변화로 인해 탁수의 발생 빈도가 증가하고 있다. 강우 유출로 유입한 탁수는 저수지 내 장기간 체류하면서 하류 하천의 수질 및 수생태계 뿐만 아니라 저수지 내부의 영양단계에도 많은 영향을 준다. 특히, 성층화된 저수지의 경우 높은 영양염류 농도를 포함한 탁수는 밀도류 거동 특성을 보이면서 수평 및 수직 혼합 과정을 거치면서 국부적인 부영양화 현상과 조류의 수화 현상의 원인이 되고 있다. 따라서 대형 저수지의 수질관리에 있어 하천 유입 탁수의 밀도류 해석, 저수지의 수온 성층 구조 변화, 부유입자의 동력학적 해석이 중요한 요소로 부각되어 왔다. 본 연구에서는 소양호를 연구 대상 지역으로 선정하여 2005년과 2007년 수문 사상을 바탕으로 2차원 횡방향 수치 모형을 구축하였다. 수치모형을 통해 수온 성층 구조의 재현성을 확인하였으며, 다양한 탁수 거동 모형을 구축하여 적용성을 평가하였다. 유입수의 SS(Suspended Solid)를 단일 입경으로 가정한 TM-1 모형, SS의 입경분포에 따라 3개의 그룹(SSi)으로 구분한 TM-2 모형, 3개 그룹을 포함하면서 저수지내 탁수 장기화로 인한 탁수 저감 효과를 1차 반응상수로 매개 변수화(유기물 함량($a_0$) ${\times}$ 분해속도(${\lambda}_a$))하여 수정된 지배방정식을 적용한 TM-3 모형을 사용하였다. 각각의 탁수 거동 모형은 2005년과 2007년 수문 조건에서 수온 성층 구조를 잘 재현하였다. TM-1 모형과 TM-2 모형을 비교해보면, 탁수 중심축의 최고 탁도에 대한 예측 성능은 TM-2 모형이 우수한 결과를 나타냈었다. 하지만, 장기 탁수 모의 시 저수지 수중 잔류 SS가 지속적으로 높게 나타나 중층 탁도를 과대평가하는 경향을 보였다. TM-3 모형이 TM-2 모형에 비해 수심별 탁도 분포에 대한 중심축 탁도가 저평가되는 경향을 보였지만 저수지 내 잔류 탁도에 대한 영향 부분에서는 개선된 결과를 나타내었다. 본 연구 결과는 저수지 탁수 밀도류 해석 및 운영 시스템에 활용 될 수 있으며, 선택 취수 설비 등의 수리 구조물의 영향 평가에 활용할 수 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.20 no.12
• /
• pp.5-14
• /
• 2019

Recently in Korea, researches on seismic analyses for high-rise buildings in a large city have been increasing because earthquakes have occurred. However, the ground conditions are not included in most of seismic researches and analyses on a high-rise building. Also the influence of the predominant period of a seismic wave is not considered in reality. Therefore, in this study, the influence of the predominant period of a seismic wave on the dynamic behavior of high-rise buildings was analyzed based on the complete system model which can consider the grounds. For this purpose, 2D dynamic analyses based on a linear time history analysis were performed using MIDAS GTS NX, a finite-element based program. Dynamic behavior was analyzed in terms of horizontal displacements, drift ratios, bending stresses, and building weak zones. As a result, in overall, the dynamic response of a high-rise building become bigger as the predominant period of a seismic wave become longer. It was also found that the predominant period had a greater influence than other parameters, ground conditions and peak ground acceleration.