• Journal of the Korean Geophysical Society
• /
• v.9 no.2
• /
• pp.87-97
• /
• 2006

LIDAR(Light Detection and Ranging) is a new technology for obtaining DEM(Digital Elevation Model)ewith high density and high point acuracy. As LIDAR emerged, DEM could be developed in the earthsurface more efficiently and more economically, compared to the conventional aerial photogrametry.In this study, a digital camera is simultaneously used in combined LIDAR surveying, and acquired digitial image and DEM produce digital orthoimage. In this process, methods of combining sensor andorthoimage, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; onewith a few GCP and the other without them. The produced maps can be used to corect or revised1:1,000 or 1:5,000 scale maps acordingly.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.10 no.2
• /
• pp.25-30
• /
• 1992

Most algorithms in computer vision and digital photogrammetry assume that digital stereo pairs are registered in epipolar geometry. But, an aerial stereo pair is not likely to be in epiplar geometry since the attitude of the camera at the instant of exposure is different at every exposure station. In this paper, stereo digital imagery is obtained from aerial stereo pair by scanner. Then procesure to resample the digital imagery to epipolar geometry using exterior orientation elements after absolute orientation is described. As a result, a stereo imagery in epipolar geometry is produced from stereo digital imagery. Epipolar imagery in this paper is applied to the image matching method by digital image correlation technique. Then, a digital elevation model is produced from the result of image matching. The digital elevation model in this paper is compared to the other digital elevation model produced by analytical plotter. As a result, an economical method to generate digital elevation model is presented.

• Water for future
• /
• v.32 no.3
• /
• pp.30-35
• /
• 1999

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.111-116
• /
• 2008

The study installed non metric camera which was a 10 Mega Pixel camera in RC Helicopter. And the study controlled images hotographed in air on land, considering their overlap. The study could express DEM by abstracting TIN from the acquired images through image registration. Also, the study compared and examined accuracy between reference point and check point observed by Total Station which was a conventional type of survey. As the results, the study could get errors of $-0.194{\sim}0.224\;m$ on X axis, $-0.088{\sim}0.180\;m$ on Y axis and $-0.286{\sim}0.285\;m$ on Z axis. Expressing an error's RMSE in the checkpoint, the study could get of 0.021388 m on X axis, 0.015285 m on Y axis and 0.041872 m on Z axis. It is judged that the above photographing and analyzing technique are better than the existing Total Station to acquire more terrain elevation data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2006

This study determines the optimum polynomial of exterior orientation parameters(EOPs) as a function of line number of linear array scanner. To estimate priori EOPs, meta data of IKONOS scene and ground control points are used. We select a first order polynomial and a constant for position elements modeling and rotation elements modeling. Positioning accuracy of the determined EOPs is compared with that of RPCs bias-corrected by the least squares adjustment. There is almost no difference between accuracies of the two methods. To obtain digital elevation model(DEM), matching line is established by the EOPs. The DEM is compared with DEM generated by ERDAS IMAGINE software, which utilizes the bias-corrected RPCs. Height differences of DEMs by the two methods are ranged within a allowable standard deviation. The produced DEM, therefore, shows accuracy similar to the verified method.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.1-9
• /
• 2017

This study investigated the effectiveness of Unmanned Aerial Vehicle (UAV) and 3D modeling on mine reclamation monitoring. The high spatial resolution of 3.8 cm ortho-mosaic image and Digital Elevation Model (DEM) are constructed based on UAV air survey. The ortho-mosaic image effectively shows mine reclamation activities and recognize objects and topological changes in the image. The comparative analysis of 3D models between UAV based DEM and report based DEM reveals that total amount of $268,672m^3$ additional dumping of contaminated soil is equivalent to 710,000 ton. It concludes that a UAV based survey enables high accuracy spatial information extraction for mine reclamation activities with high efficiency. It is expected that UAV survey will be very effectively used for preliminary data acquisition and project monitoring for mine reclamation activities.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.1
• /
• pp.123-130
• /
• 2006

The purpose of the paper is to make the three dimensional road simulation model based on the digital photogrammetry and GIS techniques in the middle of Halla mountain of Jeju island. To do this, we generate DEM (digital elevation model) and digital ortho image using GIS tools such as Arc View, Imagestation and MGE module. In GIS, the overlay map schemes combining of the hill shade, the land slope and aspect were applied. Based on the processes, we can build the best three dimensional road line along the hill side of the island. From the results, we also found that the derived DEM from digital ortho image and the GIS technique were very useful for choosing the best three dimensional road design before the real road construction works in Jeju island.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.61-70
• /
• 2006

This paper presents photogrammetric processing to generate digital elevation models using SPOT-5 HRG stereo images and deals with the accuracy potential of HRG (High Resolution Geometry) supermode imagery for DEM generation. After bundle adjustment was preformed for sensor modelling, digital surface models were generated through the procedures of Epipolar image resampling and image matching. The DEM extracted from HRG imagery was compared along several test sections with the the refernce DEM which was obtained from the digital topographic maps of a scale of 1 to 5000. The ratio of the zone with DEM errors less than 5m to the whole zone was 53.8%, and about 2.5m RMSE was showed when assuming that the zones larger than 5m were affected by clouds, water bodies and buildings and excluding those zones from accuracy evaluation. In addition, the three-dimensional bird's eye view model and 3D building model were producted based on the DSM which was extracted from SPOT-5 HRG data.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.231-235
• /
• 2003

실시간 동적 GPS 측위를 이용한 해저수심측량은 GPS 수신기가 이동중인 상태에서 신호단절 없이 연속적인 수심측정이 가능하며 등수심도와 등고선 제작에 정확한 위치를 결정할 수 있고, 음향측심기는 발사파와 수신파의 도달시간을 측정하여 수심을 관측할 수 있기 때문에 실시간으로 정확한 3차원 측량이 가능하다. 본 논문에서는 해안지역에 대한 지형 분석을 하기 위하여 기준점에 대한 정지관측을 실시하여 좌표변환계수를 산출하고, 이로부터 실시간 동적 GPS 측량과 음향측심기를 이용하여 해운대 해수욕장과 해안을 관측하였다. 1:1,200 축척의 수치지도에서 추출한 수치표고모델에서의 체적은 97953.9 ㎥이며, 실시간 동적 GPS와 음향측심기를 이용하여 추출한 수치표고모델에서의 체적은 95994.9 ㎥로 나타났다. 이는 수치지도에서의 체적과 측량결과의 체적이 단지 2.0%정도로 나타나 실시간 동적 GPS와 음향측심기의 결합에 의한 해저수심측량이 매우 성공적임을 알 수 있었다.

• 한국지형공간정보학회:학술대회논문집
• /
• 2003.09a
• /
• pp.157-162
• /
• 2003

실시간 동적 GPS 측위를 이용한 해저수심측량은 GPS 수신기가 이동중인 상태에서 신호단절 없이 연속적인 수심측정이 가능하며 등수심도와 등고선 제작에 정확한 위치를 결정할 수 있고, 음향측심기는 발사파와 수신파의 도달시간을 측정하여 수심을 관측할 수 있기 때문에 실시간으로 정확한 3차원 측량이 가능하다. 본 논문에서는 해안지역에 대한 지형 분석을 하기 위하여 기준점에 대한 정지관측을 실시하여 좌표변환계수를 산출하고, 이로부터 실시간 동적 GPS 측량과 음향측심기를 이용하여 해운대 해수욕장과 해안을 관측하였다. 1:1,200 축척의 수치지도에서 추출한 수치표고모델에서의 체적은 $97953.9m^3$이며, 실시간 동적 GPS와 음향측심기를 이용하여 추출한 수치표고모델에서의 체적은 $95994.9m^3$로 나타났다. 이는 수치지도에서의 체적과 측량결과의 체적이 단지 2.0%정도로 나타나 실시간 동적 GPS와 음향측심기의 결합에 의한 해저수심측량이 매우 성공적임을 알 수 있었다.