• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.288-288
• /
• 2018

점착성 유사는 응집 현상을 겪는 유사로, 응집 현상(Flocculation Process)는 응집 과정(Aggregation Process)와 파괴 과정(Breakup Process)의 경쟁으로 이루어진다고 여겨진다. 응집 현상을 통해 점착성 유사는 물과 점착성을 띠는 작은 입자들의 덩어리인 플럭(Floc)을 형성하여 흐름 내에서는 대부분이 플럭의 형태로 이동한다. 점착성 유사의 응집 모형 중 하나인 플럭 성장모형(Floc Growth Model, FGM)은 상미분 방정식으로 시간에 따른 플럭의 크기를 계산하는 모형이다. 응집과 파괴의 평형 상태에서 평균 입경을 얻는다. 이러한 FGM은 낮은 수치 계산 비용으로 합리적인 계산 결과를 얻을 수 있으며, 유사 이동 모형 혹은 흐름 모형과의 결합이 수월한 장점을 가진다. 또한, 닫힌 계(Closed System)에서 질량이 보존되는 특징이 있다. 반면, 결정론적인 특성을 띠면서 특정 플럭 크기만을 계산하기 때문에 점착성 유사의 입도 분포에 대한 정보를 얻을 수 없다. 결정론적 특성을 띠는 FGM에 추계학적 방법을 적용함으로써 특정 확률 분포형을 가지는 플럭의 입도 분포를 얻을 수 있다. 본 연구에서는 기 개발된 추계학적 FGM과 유사 이동 모형의 결합을 통해 변화하는 유수동역학적 조건에서 플럭의 입도 분포를 산정하고자 한다. 이전의 많은 실험실 실험 결과들은 부유가 발생한 상태를 유지하면서 수행되는 것으로, 특정 난류 특성(난류 소산 매개변수)와 특정 유사 농도 조건에서의 입도 분포를 얻는다. 그러나 하구부 및 하천의 하류는 조류의 영향을 받는 구간으로, 점착성 유사의 특성을 분석하기 위해서는 변화하는 유수동역학적 특성에 관한 고려가 필수적이라 할 수 있다. 결합된 점착성 유사 입도 분포 모형은 플럭의 침강과 재부유를 고려할 수 있는 특징을 가지며, 실측자료와의 비교를 통해 입도 분포를 합리적으로 모의하는 것으로 나타난다. 본 연구에서 개발된 점착성 유사 입도 분포 모형은 나아가 비점착성 유사의 입도 분포 모형과의 결합을 통해 두 종류의 유사가 혼재하는 구간에서도 합리적인 입도분포와 유사의 이동을 모의할 수 있을 것으로 예측된다.

• The Journal of shipping and logistics
• /
• v.34 no.4
• /
• pp.637-656
• /
• 2018

This res arch was conducted to identify a suitable location for an inland logistics complex in Gangwon Province, South Korea and it aims use competitive factors to derive implications from the logistics competitiveness of Gangwon Province. According to Origin-Destination analysis, the most suitable and desirable site for creating the complex was found to be in the Wonju city area. A total of 28 variable were derived through prior study in order to identify the competition factors for the inland logistics complex, As a result of exploratory factor analysis, a total of 16 subfactors were reclassified into four main factors. Analytic hierarchy process(AHP) analysis showed that 'accessibility factors' (0.374) ranked highest in terms of importance, followed by 'reliability factors' (0.358), 'operability factors' (0.166), and 'government policy factors' (0.102). In each category, delivery of goods from the inland logistics complex base to the demand site was found to be the most important factor (0.160).

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.287-293
• /
• 2019

The purpose of this study is to research on usability of Seoul Bike focusing on seoul citizens over-50s. Before the test, I researched Seoul Universal Design Guideline's background, purpose, principle and range through literature review. Then I did two tests based on re-establishment of the existing principle to fit the public service. First, I have noticed that using the service through an application was difficult for seoul citizens over-50s even if they have NEEDS for using Seoul Bike according to the survey. Next, I drew the result from User Task Evaluation Analysis. Due to the low app usability(the main point of the service) and accessibility and usability status was rate low, but the overall service process was comfortable and convenience. I expect this study will be a good resouce for public service design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.5
• /
• pp.309-316
• /
• 2022

This paper presents nonlinear numerical analysis results which were compared with the tested tensile strengths of CFRP(Carbon Fiber Reinforced Plastic) laminates with 14 different stacking sequences. The composite laminate coupons were cured under an autoclave pressure using resin-impregnated unidirectional tapes. The nonlinearity of the matrix was considered for the analysis, which was obtained from lamina tests. The Hashin failure criteria and progressive failure analysis were used for the nonlinear finite element analysis. The comparison results show that the current approach is acceptable to predict the tensile strengths of the CFRP laminate coupons with various stacking sequences and no damage. However, it is not acceptable to predict the tensile strengths of the laminate specimens with a center hole.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.4
• /
• pp.47-53
• /
• 2021

In this paper, we propose a quadtree-based optimization technique that enables fast Super-resolution(SR) computation by efficiently classifying and dividing physics-based simulation data required to calculate SR. The proposed method reduces the time required for quadtree computation by downscaling the smoke simulation data used as input data. By binarizing the density of the smoke in this process, a quadtree is constructed while mitigating the problem of numerical loss of density in the downscaling process. The data used for training is the COCO 2017 Dataset, and the artificial neural network uses a VGG19-based network. In order to prevent data loss when passing through the convolutional layer, similar to the residual method, the output value of the previous layer is added and learned. In the case of smoke, the proposed method achieved a speed improvement of about 15 to 18 times compared to the previous approach.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.99-107
• /
• 2004

Anisotropic characteristics of deformation are important to understand the particular behavior in the pre-failure state of soils. Recent experiments show that cross-anisotropic moduli of granular soils can be expressed by functions of normal stresses in the corresponding directions, which is closely linked to micromechanical characteristics of particles. Granular soils are composed of a number of particles so that the force-displacement relationship at each contact point governs the macroscopic stress-strain relationship. Therefore, the micromechanical approach in which the deformation of granular soils is regarded as a mutual interaction between particle contacts is one of the best ways to investigate the anisotropic elastic deformation of soils. In this study, a numerical program based on the theory of micromechanics is developed. Generalized contact model for the irregular contact surface of soil particles is adopted to represent the force-displacement relationship in each contact point far the realistic prediction of anisotropic moduli. To evaluate the model parameters, a set of analytical solutions of anisotropic elastic moduli is derived in the isotropic stress condition. A detailed procedure to determine the model parameters is proposed with emphasis on the practical applicability of micromechanical program to analyze the elastic behavior of the granular soils.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1116-1120
• /
• 2006

하천주변 저지대에 주택이나 공장 등의 시설물 집중과 산지의 개발 및 인구 집중으로 인한 도시화 지역의 증가로 홍수 피해는 더욱 커지고 있다. 특히, 상습침수지구의 주민들은 항상 재해로부터 위험을 느끼고 있으므로 새로운 재해관리체계를 구축하여 이에 대한 확고한 대책이 필요하다. 최근 인터넷 사용의 증가로 많은 사용자들이 웹을 통해 다양한 데이터를 공유하고 있으며, 이러한 추세는 더욱 더 증가할 것이다. 인터넷은 다양한 정보를 네트워크를 통해 사용자에게 실시간으로 제공하고 있으며, 통신기술의 발전, 네트워크 통합화 속에서 그 내용과 방식이 더욱 다양해지고 있다. GIS분야에 있어서도 인터넷 네트워크를 이용하여 분산되어 있는 많은 조직이나 사용자들에게 그 기능과 서비스를 제공하는 추세로 바뀌고 있다. Internet GIS는 원격 지리정보 데이타에 대한 접근, 전송, 분석 및 GIS를 표현하는 수단으로 인터넷을 이용하는 특별한 GIS 도구이다. Internet GIS는 전통적인 GIS 소프트웨어가 가지고 있는 대부분의 기능은 물론 인터넷 및 그와 관련된 WWW 및 FTP 프로토콜의 장점을 가지는 부가적인 기능들을 포함할 수 있다. 이들 부가적인 기능은 원격 데이타 및 응용 프로그램의 교환, 지역 컴퓨터에 GIS 응용 프로그램 없이 GIS 분석 기능을 수행, 인터넷상에서 상호작용하는 지도 및 데이타를 표현하는 기능들을 포함한다. Internet GIS는 객체지향적이고 상호운영적이며, 분산적이라는 주요한 특징을 갖는다. 인터넷에서 각각의 GIS 데이타 및 기능성은 하나의 객체로서 서로 다른 서버에 위치하며 필요시 조합 또는 통합되어 운영된다. Internet GIS를 이용한 상습침수지구 지역정보 제공사이트를 구축하기 위해서는 인터넷으로 서비스 할 수 있는 인터넷용 상습침수지구 GIS기본도를 구축이 필요하다. 인터넷 서비스를 위한 상습침수지구 기본도는 또 다른 형태의 주제도라고 볼 수 있으며, 이를 구축하기 위해서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.31-40
• /
• 2008

Objective: This study investigated the skeletal and dentoalveolar changes after intrusion of maxillary posterior teeth using miniscrew implants during the treatment and posttreatment period. Method: The subjects consisted of 11 adults (1 male, 10 females) whose open bites were treated by posterior teeth intrusion with miniscrew. The lateral cephalometric x-rays of pre-treatment, post-treatment, and the retention period were evaluated. Results: The average intrusion of maxillary posterior teeth at the end of the treatment period was 2.22 mm (p < 0.001) and the average extrusion of maxillary posterior teeth at the end of the 17.4 month retention period was 0.23 mm (p = 0.359). The relapse rate was calculated at 10.36%. A decrease in overbite after the 17.4 month retention period was 0.99 mm (p < 0.05). The relapse rate was calculated at 18.10%. The skeletal changes and vertical height change of maxillary posterior teeth during the retention period was statistically insignificant, but there was a significant decrease in overbite (mean 0.99 mm, p < 0.05). The amount of intrusion and the overbite improvement from treatment significantly correlates to the degree of relapse. Conclusions: The results indicate that intrusion of the maxillary posterior teeth using miniscrews is an effective, non-surgical treatment modality which can reasonably be used to address adult open bite.

• Journal of Conservation Science
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

After selecting five types of adhesive epoxy resin for metallic cultural assets such as $Araldite^{(R)}$ rapid type, $Devcon^{(R)}$, $Araldite^{(R)}$ SV427+HV427, $CDK^{(R)}$520, $Araldite^{(R)}$ AW106+HV953 which had already been studied, this paper approached more closely the problem of yellowing and the signal of aging with time passing by connecting the problems with the safety of metallic cultural assets. The change of physical properties according to the change of state of epoxy adhesives was investigated through the change of flexural strength and the change of surface hardness by artificially providing the possible environmental change factors such as ultra-violet ray, and acid base, and how the epoxy chemically changes in its ingredients by the environment was analyzed through FT-IR. As a result of the experiment, for the most part of adhesives brought about the physical change of flexural strength, the change of surface hardness, and the chemical change of chemical ingredients as the product of alcohol, which were respectively different according to the time of ultraviolet irradiation, and acid base change. Under most of the conditions, SV427+HV427 and $CDK^{(R)}$520 were fairly stabilized under each condition of weatherability, but it seems that they should be refrained from being applied in case that the area to restore is thin and wide because the degree of flexural strength of themselves is low. Also, it is found that the preservation environment is very important not only for artifacts but also for the preservation of resins sused for preservation treatment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.2
• /
• pp.46-64
• /
• 2003

The vector shaped object is generally very long (hundreds or thousands of kilometers) and very narrow (10-100 meters). Image mapping techniques and tools for these objects should be totally different from the traditional area-based targets. Acknowledging these unique characteristics of the vector shaped object, a motion picture mapping system has been developed by combining internet GIS technology with airborne video. In particular, integration between airborne video and digital maps took advantage of each component, and enabled the landscape structure to be visualized, interacted with and deployed all on the Web. The motion picture maps provided a completely new means for disseminating information for area-wide landscape in a visual and interactive manner to the general public while digital map with location information revealed successfully the major parameters that influence an area-wide spatial structure in the study area. The remote video approach breaks down the usual concept of image mapping in a conventional cartography. As a result, the research findings have established the new concept of 'internet airborne video mapping for vector shaped object', proposed as an initial aim of this paper. It would playa crucial role in improving the quality of public information service if the mapping system is operationally introduced into the Government since the highly user-friendly moving picture provides a completely new means for disseminating spatia) information for vector shaped object.