• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1025-1028
• /
• 2008

Using of maintenance system for gate bridge algorism, We made out algorism and engine for prediction of life cycle by neutralization, freezing-thawing and damage from sea wind. To objective of this system, user can use easily with maintenance system for gate bridge. Also, to improve of maintenance efficiency, web-program made out by superannuated evaluation and analysis of field exposure data. To develope web-program, we framing structure design of database, which is adapted to method of maintenance, repair, and reinforcing

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.39-45
• /
• 2008

The most important elements in flexible pavement design criteria are stress and strain distributions. To obtain reasonable stress and strain distributions in pavements, moving wheel loads must be applied to analyze the pavement responses. In this study, finite element analysis was used to identify the three-dimensional states using the vehicle load into a constant-position / time-variable load (25, 50 and 80km/hr). In an elastic system, the strain is the same in both longitudinal and transverse directions under a single wheel. However, the same is not necessary in a viscoelastic system. Test results showed that the maximum values between transverse and longitudinal strains the bottom of asphalt concrete base layers under 25km/hr were were about 40 percent.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.211-218
• /
• 2019

The Ministry of Land, Infrastructure and Transport is planning to launch CAS-500 (Compact Advanced Satellite 500) 1 and 2 in 2019 and 2020. Satellite image information collected through CAS-500 can be used in various fields such as global environmental monitoring, topographic map production, analysis for disaster prevention. In order to utilize in various fields like this, it is important to get the location accuracy of the satellite image. In order to establish the precise geometry of the satellite image, it is necessary to establish a precise sensor model using the GCP (Ground Control Point). In order to utilize various fields, step - by - step automation for orthoimage construction is required. To do this, a database of satellite image GCP chip should be structured systematically. Therefore, in this study, we will analyze various techniques for automatic GCP extraction for precise geometry of satellite images.

• Journal of Service Research and Studies
• /
• v.10 no.4
• /
• pp.43-55
• /
• 2020

Recently, as the importance of experience data increases, there are many attempts to deal with experience data from a data science perspective. In the case of approaching as a collection method of a quantitative survey method that seeks to quantify numerically such as big data, it is difficult to interpret the value of experience in a wide range, and it is relatively expensive and time consuming, and personal information infringement There is a limit to the analysis due to the risk of However, since ethnography, a procedure for collecting experience data based on qualitative research, is mainly carried out in the natural real environment of future customers from the perspective of users, it is possible to confirm the nature that customers face with a small sample. In addition, it is also easy to interpret the relational dimension of the empirical data. Although the ethnography method of collecting experiential data is economical and efficient, it is important to reduce errors in the collection process because the lack of scientific procedures for the data collection process can be a problem. It is important to secure the validity of whether the correct measurement tool is used for ethnography-based experiential data collection and to secure the reliability of the use of a valid measurement tool and method by accurately selecting the measurement target. From this point of view, it is necessary to verify the reliability of the research method that clearly selects the measurement target and secures the validity for the development of the correct measurement method and tool for the collection of ethnography experience data. Therefore, in this study, a verification study was conducted on the data and methodology cases of the'I know you_AI' service that analyzes the customer experience of self-employed based on the ethnography method of collecting experience data..

• Journal of the Korean Electrochemical Society
• /
• v.14 no.4
• /
• pp.231-238
• /
• 2011

In this work, the numerical analysis for the zincate behavior at a zinc electrode with an electrolyte flow was carried out for a ZAFC. The Nernst-Planck equation with a boundary condition of Butler-Volmer type was adopted to describe electrochemical effects of mass transfer, migration, kinetics of electrode. The Navier-Stokes equation, coupling to the Nernst-Planck equation, is also applied to describe the internal electrolyte flow fields. The validity of the numerical model is proved through the comparative analysis between numerical and experimental results. The concentration of zincate and the current density were also investigated at a zinc anode according to various electrolyte velocities. We have found the concentration of zincate decreased and the current density increased with an increase in the electrolyte velocity.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.53-60
• /
• 2011

When designing building structures, dynamic serviceability is one of the most important items. Much research is being carried out on machine vibrations that affect inside residents and expensive equipment in the building structure. The vibration effect generally depends on the mass ratio, and an adequate mass ratio is determined by comparison with the serviceability limit according to the criteria. This study investigates the evaluation of vibration serviceability by using ISO 2631 to confirm the propriety of adequate mass ratios and it is verified that the application of a complicated FE model to model the real large shaking table facility with the mathematical model simulated as a SDOF system. The weighted RMS value is then compared with the comfort limit given by ISO 2631. As a result, the analysis of the numerical model is consistent with analysis of the FE model. Moreover, it is found that the adequate mass ratio of the concrete foundation and shake table, considering the self-weight of the real facility, should be less than 0.013. It is also confirm that the sample facility is satisfies the requirement of an adequate mass ratio.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.982-990
• /
• 2019

The interest of researchers and governments in exploiting tidal energy resources is increasing. Jangjuk strait is a place with high tidal energy density potential and is therefore appropriate for the constructing of a tidal turbine farm. In this study, a numerical approach is presented to evaluate the current flow and power potential in Jangjuk strait with an ADCIRC model. Then, the tidal field characteristics are utilized as input parameters for tidal resource calculation with an in-house program. The 1 MW scale tidal energy converter devices are employed and arranged in 4 layouts to investigate the annual energy yield as well as flow deficit due to the wake ef ect at the surveyed area. The best-performed array generates an annual energy yield up to 12.96 GWh/year (without considering the wake effect); this value is reduced by 0.16 GWh/year when accounting for the energy loss caused by the flow deficit. Moreover, by altering the turbine yaw angle during the flood and ebb tides, the impacts of this factor on the energy extraction are analyzed. This indicates that the turbine array attains the maximum tidal power when the turbine yaw angle is at 346° and 164° (clockwise, to the North) for the spring and neap tide in turns.

• Korean Journal of Optics and Photonics
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2005

The fiber Raman amplifier(FRA) is a distinctly advantageous technology. Due to its wider, flexible gain bandwidth, and intrinsically lower noise characteristics, FRA has become an indispensable technology of today. Various FRA modeling methods, with different levels of convergence speed and accuracy, have been proposed in order to gain valuable insights for the FRA dynamics and optimum design before real implementation. Still, all these approaches share the common platform of coupled ordinary differential equations(ODE) for the Raman equation set that must be solved along the long length of fiber propagation axis. The ODE platform has classically set the bar for achievable convergence speed, resulting exhaustive calculation efforts. In this work, we propose an alternative, highly efficient framework for FRA analysis. In treating the Raman gain as the perturbation factor in an adiabatic process, we achieved implementation of the algorithm by deriving a recursive relation for the integrals of power inside fiber with the effective length and by constructing a matrix formalism for the solution of the given FRA problem. Finally, by adiabatically turning on the Raman process in the fiber as increasing the order of iterations, the FRA solution can be obtained along the iteration axis for the whole length of fiber rather than along the fiber propagation axis, enabling faster convergence speed, at the equivalent accuracy achievable with the methods based on coupled ODEs. Performance comparison in all co-, counter-, bi-directionally pumped multi-channel FRA shows more than 102 times faster with the convergence speed of the Average power method at the same level of accuracy(relative deviation < 0.03dB).

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.209-218
• /
• 1999

처방전달시스템은 처방의 수행은 의사가, 그에 따른 의약품조제는 약사가 수행함으로써 의약품의 오․남용을 방지하기 위한 의약분업의 실시에 따른 국민불편의 최소화와 약화사고에 따른 인증문제 등을 지원하기 위한 정보시스템이다. 처방전달시스템은 환자 개인정보의 허용된 범위 내에서의 공유와 공유를 위한 각종 개인정보 보호장치, 처방의 안전한 전달을 위한 내용의 비밀보장과 위변조방지 및 송신자와 수신자의 인증을 위한 장치가 필수적으로 필요하다. 또한 자료의 생명주기 측면에서 본다면, 처방전의 생성은 병․의원에서 이루어지며 소멸은 약국 및 환자에의해 이루어진다. 자료의 유통과정에 살펴보면 처방전달시스템의 주요성공요인은 정보의 생산자인 병․의원(의사)의 적극적인 정보제공의지와 이를 지원하는 편리한 정보시스템의 구축이라고 할 수 있다. 정보의 생산자인 병․의원 정보시스템 환경은 다양하고 복잡하기 때문에 기존의 애플리케이션을 이용하면서 처방의 전송을 위해서는 기존 애플리케이션 및 플랫폼에 독립적이며 자료의 적합한 취합과 통합이 가능하도록 지원하는 시스템이 필요하다. 처방전달 메시징시스템은 이러한 복합적인 정보시스템 환경을 지원하며 동시에 처방정보의 안전한 전달을 위해 플랫폼으로 실행될 수 있는 시스템을 말한다. 또한 처방의 비교적 짧은 생명주기와 지역적 생산, 유통구조를 적합하게 지원하기 위해 지역별 독립시스템의 구축과 공통정보 활용을 위한 중앙시스템과의 역할분담 모델에 근거한 분산시스템의 구축이 요구된다. 본 연구에서의 처방전달 메시징시스템은 일반적인 메시지서비스의 특성을 기본으로 자료전달을 위해 자료 암호화와 복호화, 송신자와 수신자에 대한 인증 및 자료접근 제한기능을 제공하며 각 클라이언트와 서버간의 실시간 연결 혹은 지연연결을 지원하는 독립적인 애플리케이션이다. 이러한 처방전달 메시징시스템을 구성하는 각 요소에 대해 정의하고 개념적 모델을 설계하고자 한다.에게 청구되며, 소비자에게 전송 되는 청구서는 사용자DB를 참조하여 사용자가 미리 정의한 원하는 형태로 변환되어 전달되며, 필요시 암호화 과정을 거치는 것이 가능해야 한다. 전송된 청구서는 전자우편의 경우, 암호해독이 가능한 전용 브라우저를 통해 열람 되며, 이는 다시 전용 브라우저를 통해 지불인증이 승인되어 청구 제시서버에게 전송된다. EBPP 시스템의 제어 흐름은 크게 기업이 청구 정보를 소비자에게 제시하는 흐름과 소비자의 지불 승인으로 인해 기업이 은행에 지불을 요구하는 흐름으로 구분할 수 있다. 본 논문에서는 통합 청구서버 및 정구 제시서버의 역할 및 구성 요소들에 대해 서술하고, EBPP 시스템과 연동하여야 하는 메일 서버와의 상호 작용에 대해 서술할 것이다. 본 시스템을 아직 구현이 되지 않은 관계로 시스템의 성능 등의 수치적 결과를 제시할 수 없는 상태다., 취약계층을 위한 일차의료, 의약관리), ${\circled}2$ 보건소 조직 개편 및 민간의료기관과 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering dry matter yields,

• Korean Journal of Poultry Science
• /
• v.39 no.1
• /
• pp.1-8
• /
• 2012

To evaluate the effects of n-3 and n-9 fatty acid combination on broiler chicks, diets containing the combinations of five different fat sources including flaxseed oil, fish oil, EPA, DHA and olive oil were provided, and all chicks were processed at 4 weeks of growth. Liver, breast and thigh samples were collected and fatty acid composition and/or CIE $L^*$, $a^*$ and $b^*$ measurement were measured. Also, live chick and liver weights were weighed and the ratio was provided as an evidence of fat accumulation in liver. No significant difference was determined in both live and liver weight ratio and liver color. EPA was low in FHO as compared to livers from others. In contrast, DHA was significantly high in FHO. In broiler breasts derived from FDO, AA and n-3 fatty acid content was high, but only numerical differences of EPA and DHA were determined in breasts from FDO. The thighs from FHO showed high in EPA, DHA and n-3 fatty acid content but had low in AA and n-6 to n-3 ratio. Therefore, the results indicate that broiler chicken diets containing either FDO or FHO may be possible combination diets increasing n-3 polyunsaturated fatty acids in broiler chicks.