• Journal of Korean Society of Steel Construction
• /
• v.18 no.6
• /
• pp.717-726
• /
• 2006

Traditional external post-tensioning method using either steel bars or tendons is commonly used as a retrofitting method for steel composite bridges. However, the method has some disadvantages such as stress concentration at anchorages and inefficient load-carrying capability of live loads. Multi-stepwise prestressing method using thermal expanded coverplate is a newly proposed prestressing method, which was originally developed for prestressing steel structures. A new retrofitting method for steel girder bridges founded on a simple concept of thermal expansion and contraction of cover plate, the method is a hybrid of and combines the advantages of external post-tensioning and thermal prestressing. In this paper, basic concepts of the method are presented and an illustrative experiment is introduced. From actual experimental data, the thermal prestressing effect was substantiated and the FEM approach for its analysis was verified. The retrofitting effects ofa single-span bridge were analyzed and the feasibility of the developed method was examined.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.7
• /
• pp.99-105
• /
• 2004

When a saturated clay is sampled from a borehole in an undisturbed manner, the exerted negative pore water pressure restricts the volume expansion. The vertical and horizontal stresses to which the clay was subjected in the ground are smaller and larger than this isotropically confining stress equivalent to the mean principal stress in the ground, respectively. Therefore the sample expands vertically and shrinks laterally under an undrained condition. In the ordinary consolidation test, the sample thus deformed is trimmed to fit the inside of the consolidometer ring. Thus, the specimen generates larger consolidation displacement due to confining larger horizontal stress when in-situ effective pressure is loaded. The specimen does not reproduce the in-situ consolidation behavior, In this paper, considering sample deformation, the test specimen is made to expand laterally to fit the inside of the ring in the undrained manner when the in-situ effective pressure is loaded. And applicability of this proposed test procedure was verified; results from the conventional consolidation test procedure are also discussed.

• 월간산업보건
• /
• s.105
• /
• pp.16-25
• /
• 1997

직업성 피부질환은 1988년 미국 전체 직업성 질환중 20%에 해당된다(미 노동부 자료 참고). 그 비율은 주에 따라 크게 달라지기도 한다. 피부질환은 어떤 주에서는 보상되는 직업성 질환의 대다수를 차지하기도 한다; 예를 들어, 캘리포니아와 플로리다주에서는 농작물에 의한 접촉성 피부염이 흔하다. 접촉성 피부염은 직업성 피부질환으로 보고되는 가장 흔한 피부질환이다. 이러한 사례의 4/5는 유기용제, 절삭유, 세척유, 알칼리, 산 등과 같은 자극성 화학물질에 대한 노출과 관련이 있다. 자외선은 어떤 화학물질(예를 들면, 코울 타르, 크레오소오트)과 반응하여, 이 화학물질 및 빛에 노출되는 부위에 자극성 접촉성 피부질환을 유발하기도 한다. 1/5의 사례는 에폭시 수지, 크롬, 식물 수지, 그 밖의 많은 것 등 특수 접촉 감광제와 관련될 수 있다. 강한 자극제에 노출되어 발상하는 화학적 화상은 비교적 흔하게 일어난다. 백반과 유사한 피부탈색은 드물게 일어나며 피부 접촉을 통하여 야기하는 특수 화학물질과 관련될 수 있다. 여드름과 모낭염은 기름 및 유지들과의 피부 접촉을 통하여 생겨날 수 있다. 10대 여드름과 구별되는 염소성 여드름이라고 불리는 질환은 여러 종류의 염화 탄화수소들(예를들면 다브롬화 디페닐, 다염화 디페닐, 디옥신)에 노출되어 발생되기도 한다. 신체적인 손상으로 반복되는 외상부위에 가골이 형성되기도 한다. 여러 종류의 일에 특징적인 것(예를 들면 바이올린 연주자의 목에 가골)이 소위 "직업적인 표지" 이다. 전기톱 작동 기술자, 분쇄기 작동기술자, 지하 광산 암석 천공 기술자에게서 발생하는, 손 - 팔 부위의 진동은 오랜기간 혹은 심하게 노출된 노동자에 있어서 - 손에 혈관수축질환 - 진동장애 백색 수지질환을 일으킬 수 있다. 피부암은 직업과 관련이 있다고 할 수 있다. 하지만 몇몇 사례가 산재 관련 기관에 보고외어 있지만, 암등록소에 보고는 불완전하며, 피부암으로 인한 사망은 드물기 때문에 피부암의 발생률은 알 수 없다. 예방적인 방법은 개인보호구(장갑, 구두 등), 기계공학적 통제, 노동자 교육, 피부에 노출되는 것을 피하기 위해 주어진 일을 맡는 노동자들의 교대와 같은 관리적인 통제가 있다. 이러한 방법들은 화학적 화상, 알러지성 접촉성 피부염과 같은 피부염, 진동장애, 직업관련성 질환(예를 들면, 건선, 단순태선, 백반)을 예방하는데 도움이 된다. 만성 자극성 접촉성 피부염은 아직 잘 이해하고 있지 못하여 현재 예방하는 방법은 아직 만족스럽지 못하다.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.10
• /
• pp.15-24
• /
• 2010

In the case of underground power utilities pipe such as circular pipe, the most difficult problem is low compaction efficiency of the bottom of pipe inducing the failure of utilities. To overcome this problem, various studies have been performed and one of these is CLSM(Controlled Low Strength Materials) accelerated flow ability. But underground power utilities pipe backfill materials is also needed to have good thermal property that can dissipate the heat as rapidly as it is generated. So, in this study, we performed thermal resistancy test for various materials such as sand, weathered soil, clay and mixed soil to analyze the thermal characteristics of CLSM(Controlled Low Strength Materials) with accelerated flow ability for various conditions(water content, unit weight, void ratio, curing time) and to evaluate the applicability for backfill material of underground power utilities pipe. The test results of 16 specimens for thermal resistancy test showed good thermal property that maintained below $85^{\circ}C\;cm/W$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.587-592
• /
• 2016

Bellows for LNG carriers must be corrosion resistant in order to operate in seawater environments. They must also have long fatigue lives in order to withstand the expansion and contraction caused by large temperature changes and continuous vibration in extreme environments. In order to incorporate these properties into bellow design, it is important to use materials that are resistant to cold brittleness and corrosion, and maintain their optimized forming condition. The design conditions and forming methods used for bellows must be optimized in order to incorporate these characteristics. In this study, finite element analysis was used to develop cryogenic bellows, which have good mechanical strength and reliability. In addition, two different forming methods (mechanical and hydroforming) were used to design and produce bellows, in order to derive their forming condition. The height, thickness, and hardness of the convolutions of bellows produced by each method were measured and compared with each other. The results confirmed that the two forming methods produced bellows with different mechanical properties.

• Journal of Chest Surgery
• /
• v.32 no.1
• /
• pp.53-57
• /
• 1999

We describe a case of successful extracorporeal membrane oxygenation(ECMO) in a small infant with cardiopulmonary resuscitation(CPR) failure after an open heart surgery. A 35-day-old male infant weighing 4.4 kg who had congestive heart failure and pulmonary hypertension underwent patch closure of ventricular septal defect without any intraoperative event. Postoperative course was unremarkable in the intensive care uint for about 5 hours before the junctional ectopic tachycardia developed. Sudden cardiac decompensation with bradycardia occurred about 50 minutes after the development of junctional ectopic tachycardia. He was put on ECMO by arterial cannulation at the ascending aorta and by venous cannulation at the right atrial appendage after 4 hours' CPR. The hemodynamics were stable with enough urine output during ECMO. He was weaned from ECMO 38.5 hours after initiation. Delayed sternal closure was attempted. He was extubated on postoperative day 7 and discharged home on postoperative day 21 without any neurologic sequelae.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.118-125
• /
• 2016

This paper proposes the appropriate waterproofing methods for underground structures after applying different types of waterproofing materials on the concrete test specimens and selecting the best results out of humidity testing in winter conditions. Results of the testing showed that the underground structures absolutely require relevant waterproofing application based on the environmental conditions; when applied with interior waterproofing, the results showed that the concrete maintained high level of humidity and reinforcing steel within the concrete layer corroded. However, when applied with exterior waterproofing, it was shown that the waterproofing layer prevent direct contact with water and concrete, thereby protecting the concrete structure and improving overall durability. It follows that during underground structure construction, exterior waterproofing methods are have shown by an effective method for improving the durability as well as providing a comfortable interior environment for users.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.5
• /
• pp.1009-1018
• /
• 2019

This paper describes the design and implementation of a rehabilitation medical device based on a EMG measurement. Rehabilitation systems are controlled using BLDC motors and motor drives. The BLDC motor drive controls the operation and the speed controls the drive through the external servo motor. In addition, potentiometer coupled to the outside of the motor transmits information about the position of the load being rotated by the motor. The rehabilitation algorithm is controlled by limiting the maximum angle of 0 to 120 by utilizing the motor according to the user setting stage during the rehabilitation exercise. The walking algorithm compensates motor control for the low leg of the signal using the difference value of the signal obtained with the surface denser attached to both inner muscles. The motor and surface denser are utilized for the walk motion to control the maximum angle of 0 to 80.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.5
• /
• pp.8-14
• /
• 2021

Post-tensioned prestressed concrete members experience immediate prestress losses as well as time-dependent prestress losses such as creep, dry shrinkage and relaxation. In addition, the stress of the upper and lower parts of the member changes due to the change in dead load due to the replacement of the upper slab and/or pavement. Such changes in fiber stress may affect the safety of the member, and it is necessary to adjust the prestressing force. Therefore, in this study, a screw type of re-tensioning post-tension kit is proposed, and it is verified that the safety against load and the stability against strain are satisfied through the load transfer test specified in EAD160004 and KCI-PS101.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.182-188
• /
• 2019

A proper vertical dimension and a harmonious occlusal plane are essential to satisfy a patient esthetically and functionally. A maxillomandibular occlusal vertical dimension is determined by the elevators which repeatedly contracts to a certain length, and a tooth location is determined by a maxillomandibular vertical dimension. The patient of this case came in with the incongruity of the lips and the occlusal plane. The result of clinical test showed the lack of length of the lower anterior due to the reduction of vertical dimension, the deep overbite of anterior, the excessive attrition of anterior, and the incongruity of occlusal plane. After the diagnostic wax-up, the temporary restoration was installed, and final prosthesis was installed after 6 months. As a result, the patient obtained a functionally and esthetically satisfying result.