• Journal of Broadcast Engineering
• /
• v.19 no.3
• /
• pp.372-384
• /
• 2014

DTV field tests have been performed to measure field strength and to check reception ratio on indoor and outdoor sites. They use an antenna of 9m to measure DTV signal in case of outdoor measurement on the road. Modern skyscrapers require the analysis of vertical-directional wave propagation by measuring vertical-directional DTV signal. Even if the field strength is above the reception threshold of $43dB{\mu}V/m$, the reception is impossible in case of strong multi-path or high impulse noise. So, vertical-directional field measurement is essential in environment of tall buildings. In this paper, we developed an octo type multi-copter to measure vertical-directional DTV signal level. A compact and portable DTV signal level meter, an antenna, a microwave transmitter for data transmission, and a recording equipment are equipped in the multi-copter. Three different sites are selected to test the measurement system. Developed measurement system using the multi-copter is very useful in measuring vertical-directional DTV signal, especially in apartments, non-accessible area by vehicles, and forbidden areas.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.312-321
• /
• 2003

In this paper, we implement robot which are ability to recognize obstacles and moving automatically to destination. we present two results in this paper; hardware implementation of image processing board and software implementation of visual feedback algorithm for a self-controlled robot. In the first part, the mobile robot depends on commands from a control board which is doing image processing part. We have studied the self controlled mobile robot system equipped with a CCD camera for a long time. This robot system consists of a image processing board implemented with DSPs, a stepping motor, a CCD camera. We will propose an algorithm in which commands are delivered for the robot to move in the planned path. The distance that the robot is supposed to move is calculated on the basis of the absolute coordinate and the coordinate of the target spot. And the image signal acquired by the CCD camera mounted on the robot is captured at every sampling time in order for the robot to automatically avoid the obstacle and finally to reach the destination. The image processing board consists of DSP (TMS320VC33), ADV611, SAA7111, ADV7l76A, CPLD(EPM7256ATC144), and SRAM memories. In the second part, the visual feedback control has two types of vision algorithms: obstacle avoidance and path planning. The first algorithm is cell, part of the image divided by blob analysis. We will do image preprocessing to improve the input image. This image preprocessing consists of filtering, edge detection, NOR converting, and threshold-ing. This major image processing includes labeling, segmentation, and pixel density calculation. In the second algorithm, after an image frame went through preprocessing (edge detection, converting, thresholding), the histogram is measured vertically (the y-axis direction). Then, the binary histogram of the image shows waveforms with only black and white variations. Here we use the fact that since obstacles appear as sectional diagrams as if they were walls, there is no variation in the histogram. The intensities of the line histogram are measured as vertically at intervals of 20 pixels. So, we can find uniform and nonuniform regions of the waveforms and define the period of uniform waveforms as an obstacle region. We can see that the algorithm is very useful for the robot to move avoiding obstacles.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.221-224
• /
• 2009

최근 사회기반시설을 대상으로 900 MHz - 2.45 GHz 대역의 무선 센서 네트워크 시스템을 이용한 구조반응 모니터링 연구가 수행되고 있다. 건물의 경우 수직, 수평으로 구조 부재, 칸막이 벽, 외장재 등에 의해서 공간이 차단되어 있고, 전파 간섭의 영향이 상대적으로 크기 때문에 900 MHz - 2.4 GHz 대역의 무선 네트워크 시스템은 그 한계가 있다. 본 논문에서는 이러한 문제점을 고려하여 장애물에 대한 회절성이 뛰어나고 전파의 간섭이 상대적으로 작은 저주파 대역의 무선 라디오 주파수를 도입한다. 이로부터 특히 지진 또는 바람의 영향 등의 외부 하중에 의하여 대규모 인명 손실을 초래할 수 있는 중요도가 매우 높은 대형 건물을 대상으로 실제 적용이 가능한 무선 센서 네트워크를 구성해 보았다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.2
• /
• pp.9-15
• /
• 2014

'Visual segment surface' means a surface that extends from the missed approach point of non precision approaches (or the decision altitude location for approaches with vertical guidance and precision approaches) to the threshold to facilitate the identification of and protection from obstacles in this visual segment of the approach. Validation is the necessary final quality assurance step in the procedure design process, prior to publication. The purpose of validation is the verification of all obstacle and navigation data, and assessment of flyability of the procedure. This paper shows how to apply the protection for the visual segment of the approach procedure, and the results of the validation for visual segment surface conducted at an airport.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.32-35
• /
• 2005

밭고랑 옆의 해가림시설 지주목에 파이프라인을 설치하고 방제장치를 탑재한 주행장치가 자동으로 파이프를 추적하면서 농약을 살포 할 수 있는 방제기를 개발하여 인삼재배포장에서 성능시험을 실시하였다. 그 결과를 요약하면다음과 같다. 가. 인삼재배용 방제기의 주행장치는 동력원으로 축전지를 사용하는 DC모터에 의한 4륜 구동형으로 제작하였고, 방제장치는 수직 붐노즐 방식으로 쌍선형 노즐을 좌우에 3개씩 부착하고 살포각도를 조절할 수 있도록 제작하였으며, 인력으로 골간 이동시키는 방식이다 나. 성능시험결과 주행속도는 0.3m/s이고, 장애물이나 요철부의 통과 가능높이는 4cm였고, 작업성능은 38분/10a로 나타났다. 다. 방제성능은 피복면적비를 측정한 결과 인삼 잎 앞면은 100%, 뒷면은 40%이상으로 분무입자의 부착률이 양호한 것으로 나타났다.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.201-204
• /
• 2007

본 논문에서 디지털지도를 이용하여 다중경로 전파의 특성을 연구하였다. 일반적으로 목표물에서의 전계의 세기는 직접파와 지면 반사파의 합으로 구해진다. 이 논문에서는 수직면의 장애물인 고압선, 철탑, 산악지형의 경사면 등에 의한 반사파를 고려하여 전체 전계를 계산 하였다. 그리고 지면 반사의 경우, 지면의 경사를 고려하여 목표물에서의 전체 전계의 정확도를 향상시켰다.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.16-25
• /
• 2011

This study aimed to evaluate factors related to the ability of ambulatory patients with cerebral palsy (CP) to walk over vertical and horizontal obstacles. Twenty patients with spastic CP who were able to walk independently for at least 10 m with or without walking devices were recruited for the study. Participants were required to walk over small obstacles (1, 4, and 8 cm in height or width; total of 6 conditions). A 'fail' was recorded when either the lower limbs or the walking device contacted the obstacle. Linear regression analyses were used to determine the effects of age, sex, walking devices, eyeglasses, subtype (hemiplegia or diplegia), ankle foot orthoses, functional level, and score of body mass index on the ability of obstacle crossing. Fifteen participants (75%) failed to adequately clear the foot or walking device over obstacles in at least 1 condition. The chance of failure in crossing vertical obstacle was affected by the use of ankle foot orthoses, eyeglasses, gender, and CP subtype (p<.05). The failure rate crossing horizontal obstacle was affected by CP subtype. These findings suggest that rehabilitation procedures should (1) consider the clinical characteristics of patients in order to prepare them to be more independent while performing daily activities, and (2) incorporate environmental conditions that patients encounter at home and in the community.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1225-1230
• /
• 2016

This paper deals with performing missions of a small biped robot using image processing. Localization is required for stable walking under a given map. Localization of the robot is done by extracting boundary on a driving course. Estimation of three parameters including location and orientation is required when walking on a plane. In this paper, two parameters including the location of the robot along the vertical direction of robot's walking direction and an orientation is estimated for localization. Color is used for the detection of obstacles and normalized values are used for the stable detection.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.01a
• /
• pp.279-280
• /
• 2011

2바퀴이상의 로봇은 중심점을 기준으로 안정화가 이루어진다. 그러나 2바퀴이하의 로봇으로 수직 자세를 유지하기 위해서는 로봇자체를 기울여 중심점을 이동하므로 수평을 유지할 수 있다. 그러나 이러한 중심점의 이동은 속도나 방향성분이 같이 출력되므로 정확한 센서의 계산이 요구되고 정밀한 제어를 필요로 한다. 또한 많은 구조물로 인해 장애물 인식 및 자율주행 알고리즘 등이 필요하며 장시간 정보획득과 무인기 연동을 위한 빠른 움직임을 가져야한다. 위의 2조건을 만족하기 위한 구성으로 최근들어 두 바퀴를 가지는 모바일 역진자 로봇에 대한 연구가 활발히 이루어지고 있다. 이는 서비스 및 주행 로봇의 알고리즘이 휴머노이드에서 모바일 역진자 로봇으로 변화되었기 때문이다. 모바일 역진자 로봇은 휴머노이드에 비하여 사용되는 모터의 수가 적고 균형을 잡으려면 관절마다 값비싼 고성능 모터가 필요하며 이를 가동하려면 전력도 많이 소모되며 대용량 배터리를 장착할 수밖에 없게 된다. 반면 바퀴로 움직이는 로봇은 전력이 적게 들고 이동도 쉽다. 따라서 본 연구에서는 IMU를 이용한 간단하면서도 정확한 센서의 연산 방법과 이를 이용한 자세제어 방법을 연구한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.294-302
• /
• 1998

Ignition characteristics of a vertical solid fuel plate with block have been investigated experimentally. For low radiant heat flux, ignition does not occur in a vertical solid fuel plate without block. In the case with the block on a vertical fuel plate, however, ignition can occur by increasing the residence time and the time to absorb the incident radiation flux by fuel vapor in gas phase. The ignition occurs below block and the point varies according to the block location and the block height. As the block height increases, the block locates at higher position, and the hot wall temperature increases, the ignition delay time decreases. Also as the initial temperature of fuel plate rises, the ignition delay time of the solid fuel plate decreases. The temperature distribution of solid fuel plate with block is nearly proportional to the radiant heat flux distribution. Therefore, the effect temperature by natural convection heat transfer is of the same order as that of inhibition of temperature increase by pyrolysis.