• Journal of Korean Electronics
• /
• v.3 no.8
• /
• pp.101-106
• /
• 1983

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.11a
• /
• pp.102-103
• /
• 1991

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.196-197
• /
• 2002

보편적으로 알려진 CoCr합금 수직기록매체의 경우, 기록매체에서 출력되는 신호의 크기가 작고 열적안정성이 떨어지는 문제점이 있다. 이러한 CoCr합금 수직기록매체를 대체할 기록 매체로 Co/Pd 다층박막에 관한 연구를 수행하였다. Co/Pt 및 Co/Pd계 다층박막은 수직배향성을 가지며 일찍부터 Magneto-optical 매체로 연구되었다. Co/Pd 다층박막은 자성재료와 비자성재료를 약 2~3개 원자층의 박막 두께(10$\AA$이하)로 번갈아 가며 진공증착한 것으로. CoCr합금계 수직기록매체에 비해 열적안정성이 뛰어나고 수직방향의 잔류 자화가 큰 장점을 가지고 있다. (중략)

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.41-47
• /
• 1993

Effects of Ta addition on Co-Cr pependicular magnetic recording media were studied to obtain high perpen-dicular coercivity at lower substrate temperature. For the purpose. magnetic properties and microstructures of Co-Cr-(Ta) films were studied by varying the Cr contents from 17 to 21 at.% and Ta contents for 0 to 3.2 at.%. Effectiveness of Ta addition in increasing perpendicular coercivity was significant for lower Cr content films. The increasement of perpendicular coercivity was more pronounced for the films deposited on $100^{\circ}C$ heated substrate in the case of ${(Co_{83}Cr_{17})}_{98.4}Ta_{1.6}$ composition. The cause of the increase of perpendicular coercivity was considered due to not the grain refinement effects and the improvement of c-axis alignments but increase of Ta and Cr segregation.

• Korean Journal of Materials Research
• /
• v.6 no.5
• /
• pp.470-474
• /
• 1996

증착법을 이용해 증착시 기판의 온도를 변화시키면서 MnSbPt 합금 박막을 만들고 이를 열처리 한 후 나타나는 자기 및 자기광학적 성질을 조사하였다. Mn45Sb45Pt10조성의 박막에서 0.85$^{\circ}$의 높은 Kerr Rotation Angle값을 나타내고, 또한 광원의 입사파장이 단파장으로 이동하여도 우수한 Kerr Rotation Angle 값을 유지함으로써 자기광 재료로서의 기록밀도 향상가능성이 기대된다. 이 재료가 갖고 있는 열악한 자기적성질도 열처리를 통하여 포화자화값과 보자력의 향상 효과를 얻었지만, 자기광 재료가 갖추어야할 수직자화를 얻기에는 미흡하여 이에 대한 보완이 필요하다.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.93-97
• /
• 1996

The effects of annealing after deposition on the magnetic and magneto-optical properties of MnSbPt thin films prepared by rf sputtering were investigated. The MnSbPt alloy thin films were annealed in a vacuum with $10^{-5}$ Torr and the air, respectively, as a function of temperature and time. The films annealed at $300^{\circ}C$ for 4 hours was found to have the highest value of the saturation magnetization. The films annealed in the air did not show any thermal degradations, which indicates their chemical stability for the magneto-optical recording process. It was revealed that the $Mn_{43}Sb_{46}Pt_{11}$ films annealed at $300^{\circ}C$ for 4hours in a vacuum with $10^{-5}$ Torr exhibit high Kerr rotation angle of $0.8^{\circ}$ for the incident wavelength of 550nm, which is ascribed to the increase of the volume ratio of Clb phase. However, similar to the PtMnSb alloy thin films, these films are still horizontally magnetized and have the coercive field less than 400 Oe.

• Journal of the Korean Magnetics Society
• /
• v.6 no.1
• /
• pp.15-20
• /
• 1996

Co/Pd와 Co/Pd 다층박막으로 구성된 이중막 시스템에서 direct overwriting을 구현하는데 필수적인 교환결합 (exchange coupling)에 대하여 연구하였다. Co/Pd 및 Co/Pd 다층박막을 수직자성을 가지도록 하기 위하여 Co층의 두께를 4- .angs. 이하로 하여 전자빔 증착법으로 제작한 후 x-ray 회절 실험으로 구조 분석을 하였고, Kerr spectrometer, VSM을 사용하여 자기 및 자기광학적 성질을 조사하였다. 기억막과 기준막으로 구성된 이중막에서는 exchange coupling이 커서 자화반전이 두 박막에서 동시에 일어나며, 두 박막사이에 적당한 두께의 비자성 사이막(non-magnetic spacer)이 존재하는 경우에는 두 박막사이의 교환결합의 크기가 줄어들어서 두 박막의 자화반전이 분리되어 계단식 자화곡선이 생겼다. 또 비자성 사이막이 두꺼우면 두 박막사이의 교환결합이 사라짐이 관찰 되었다. 두 박막사이의 교환결합은 자구 기록 실험을 통해서도 그 존재를 확인할 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1988.10a
• /
• pp.46-46
• /
• 1988

Structural and magnetic properties of Co-Cr-Mo films were investigated in connection with sputtering conditions. Films were prepared using a convention RF sputtering system. X-ray diffractometry, scanning electron microscopy and transmission electron microscopy were employed to investigate structure properties. Vibrating sample magnetometry was used for coercivity and saturation magnetization measurements. Co-Cr-Mo films displayed reasonable values of perpendicular coercivity and saturation magnetization for perpendicular recording media and showed good perpendicular orientation of the hcp c-axis to the film surface. Perpendicular coercivity was strongly dependent upon substrate technique showed better c-axis orientation than hose using the stationary substrate. Co-Cr-Mo films of 2.9 at. % Mo content showed maximum perpendicular coercivity and saturation magnetization. The films deposited at lower Ar pressure showed good magnetic properties. There was no explicit relationship between the columnar structure and c-axis orientation. Co-Cr-Mo films was found to have suitable structural and magnetic properties for perpendicular recording media.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.22-28
• /
• 1992

Barium ferrite thin films were reactively deposited with Fe and BaO composite targets by a facing tergects sputtering unit. When thermally oxidized silicon wafers were used as substrates, minimum substrate heating of $750^{\circ}C$ was necessary for the perfect c-axis alignment in barium ferrite films. To lower the critical substrate temperature for the good c-axis alignment, such seed layers as ZnO, ${\alpha}-Fe_{2}O_{3}$ and ${\gamma}-Fe_{2}O_{3}$ were tested. The excellent c-axis algnment of BaM was obtained at a substrate temperature of $600^{\circ}C$ on ZnO seed layer whose (002) plane was parallel to the substrate surface. The magnetic properties of the BaM film showed saturation magnetization of 295 emu/cc, perpendicular coercivity of 1.7 kOe and squareness of 0.75. Optimum deposition rate of $230\;{\AA}/min$ was obtained with the composite target and this was 5 to 20 times higher than those of other investigators with oxide targets.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.195-199
• /
• 1998

Magnetic and Magneto-Optical properties of Co-based MnSbPt thin films prepared by R.F Sputtering were investigated. In this study, the optimum heat treatment condition was found to be $300^{\circ}C$-4hours under a $5\times10^{-6}$ Torr, but perpendicularly magnetized thin films could not be obtained. Coercive force showed maximum value of about 5000e at $250\AA$ Co thickness but the value is not enough for practical use of the thin film. Heat treated Co-based MnSbPt thin film shows 0.78 degree of Kerr rotation angle for 700nm of incident wavelength.