• Polymer(Korea)
• /
• v.29 no.6
• /
• pp.549-556
• /
• 2005

Effects of the dimensionless variables on the heat transport phenomena in the extrusion process of a single screw extruder have been studied numerically. Based on the understanding of the solids conveying related to the geometrical structure and characteristics of the screw, the heat balance equation for the solids conveying zone was established and normalized. The finite volume method and power-law scheme were applied to derive a discretized equation and the equation was solved using the alternating direction iterative method with relaxation. Effects of the dimensionless parameters, Biot and Peclet numbers, that define the heat transfer characteristics of the solids conveying zone have been investigated with respect to the temperature of the feeding zone and the length of the solids conveying zone. As the Biot number is increased, the heat loss by cooling dominates to decrease the temperature of the barrel but it has little effects on the temperature of the solids bed and the length of the solids conveying zone. On the other hand, if the Peclet number is increased, the convection term dominates to decrease the temperature of the solids bed and it results in an increase in the length of the solids conveying zone.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1995.11a
• /
• pp.115-115
• /
• 1995

다중 효용관식 증발기는 보통의 증발기에서 응축하여 제거하는 증기를 다음 효용관의 가열원으로 재사용하는 것으로 그 자체로도 에너지 절감효과가 있는 것으로 알려져 있다[1,2,4]. 기계식증기 재압축 증발기는 보통 증발기에서 응축시켜 제거하는 발생 증기를 압축하여 고온의 증기로 만든 다음 가열원으로 재이용하는 장치로 이에 대한 효용은 문헌에 잘 나타나있다[3,4]. 여기서는 다중효용관과 증기 재압축기를 조합한 증발기 중에서 Forward feed 방식의 다중효응관에 증기 재압축기를 부착한 경우에 대하여 타당한 물질수지, 열수지, 전열 식, 상평형식을 소개하였다. 또한 압축기의 용량을 결정하기 위한 단열압축공정의 지배방정 식을 소개하였다. 원료의 조건, 효용관의 수 및 총전열온도차가 주어지면 상기의 지배방정식의 해를 구할 수 있는데. 본연구에서는 Gauss-Seidel의 연속치환법을 이용하였다. 이와 같이 지배방적식의 해를 구하면 효용관의 면적, 압축펌프의 용량, 각효용관 입출구의 조건 등이 계산된다. 다중효용관 기계식 증기 재압축 증발장치의 최적화를 위하여는 효용관의 전열면적당 가격과 압축펌프의 용량당 가격 그리고 펌프를 운전하는데 필요한 전력의 요금 등의 자료가 요구된다. 총전열온도차에 따른 운전비와 시설비의 합이 최소가 되는 점이 최적 총전열온도차가 되는데 이 점을 구할 때에는 수치적으로 안정한 이분법을 이용하였다. Borland C++를 이용하여 프로그램하였으며 윈도우즈 환경에서 수행되게 하였다. 사용자 쉽게 이용할 수 있게 하기 위하여 각종 필요한 데이터를 입력할 수 있는 Edit box가 화면에 나타나게 하였다. 또한 입력된 데이터를 저장하거나 불려올 수 있는 메뉴, 입력된 데이타를 이용하여 효용관의 면적과 압축기의 용량을 계산하거나 효용관의 수가 주어졌을 때 총전열온도차를 최적화하는 것을 선택할 수 있는 메뉴 그리고 계산 결과를 파일로 혹은 프린트로 출력할 것을 선택할 수 있는 메뉴가 있다. 사용자는 해당되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.1-9
• /
• 2008

Fiber Reinforced Polymer (FRP) composites are used extensively in aerospace, marine, automotive, infrastructure, chemical processing and sporting good applications. A concern with using FRP composites in some engineering structures is their high flammability and poor fire resistance In this research, material properties of FRP composites at increasingly high temperatures was measured and verified. The obtained mechanical properties of FRP composites were performed according to ASTM D3039/D3039M and tested to a wide range of heat conditions with temperatures from Room-temp. to 300 for times up to 30 min. It is found that the mechanical properties of FRP composites dropped with increasing heat or temperature. The reduction to the properties was due mainly to thermal degradation and combustion of the polymer matrix.

• Journal of the Korean Chemical Society
• /
• v.38 no.9
• /
• pp.660-666
• /
• 1994

The effects of temperature and flow rate of eluent on the separation of adjacent lighter lanthanide pairs (La : Ce, Ce : Pr, Pr: Nd) have been studied with displacement chromatography. Two serial columns packed with Amberlite 120 cation exchange resin are used for loading and separation. The retaining ion is $H^+$ ion and the eluent is 0.012M and 0.015M of EDTA solution. The columns and the eluent are maintained at the temperature of 90$^{\circ}C$ and pressurized to reduce vaporizing in the ion-exchange resin column. The eluated solution is analyzed directly with ICP-AES. The separation factors of the lanthanide pairs, La: Ce, Ce :Pr, and Pr: Nd, are 4.6, 2.8, and 1.9, respectively and are higher than that from theoretical calculation at 25$^{\circ}C$. When the flow rate is reduced from 2.5 ml/min to 1.5 ml/min, the HETP is reduced from 1.60 cm to 0.88 cm. The separation efficency can be improved at lower flow rate of eluent and higher operating temperature. The recoveries of pure lanthanides than 99.9% are 49∼77% from this separation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.660-665
• /
• 2014

Optimization of process parameters in polymer extrusion is an important task to reduce manufacturing cost. To determine the optimum values of the process parameters, it is essential to find their influence on the elongation of polymer breathable thin film. The significance of six important process parameters namely, extruder cylinder temperature, extruder speed, extruder dies temperature, cooling roll temperature, stretching ratio, stretching roll temperature on breathable film elongation of polymer extrusion was determined. Moreover, this paper presents the application of Taguchi method and analysis of variance(ANOVA) for maximization of the breathable film elongation influenced by extrusion parameters. The optimum parameter combination of extrusion process was obtained by using the analysis of signal-to-noise ratio. The conclusion revealed that stretching ratio were the most influential factor on the film elongation. The best results of film elongation were obtained at lower stretching ratio.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.929-933
• /
• 1997

에폭시 수지 DGEBA/MDA/GN계의 트링 열화에 미치는 전압과 온도의 영향에 대한 고찰을 통하여 고분자 절연재료의 절연파괴 거동을 연구하였다. 전압 인가시간에 따라 트리의 성장속도은 역S자의 형태로 나타났다. 인가전압과 온도가 증가함에 따라 트리의 성장속도는 증가하였으며 트리형상의 복잡함, 즉 국부적인 트링열화의 정도는 인가전압이 감소하거나 온도가 증가한 경우에 높게 나타났다. 절연파괴 강도는 유리 전이온도 이상에서 급격히 감소하였다.

• Electrical & Electronic Materials
• /
• v.6 no.1
• /
• pp.15-21
• /
• 1993

Silane과 Disilane를 사용하여 화학증착법으로 제작한 다결정 실리콘의 미세구조를 증착온도의 변화에 따라 조사하였다. Silane과 Disilane의 증착온도는 각각 550에서 640.deg.C와 485에서 620.deg.C로 변화시켰다. Disilane은 silane에 비해 반응성이 크고 비정질에서 결정으로 변하는 전이온도는 약 20.deg.C정도 높았다. 전이온도에서 증착한 시편은 실리콘 source에 관계 없이 (311)조직의 거친 표면으로 되어있었다. 900.deg.C에서 열처리하는 동안 비정질로 부터는 (111)쌍정립계를 갖는 수지상의 결정성장을 하였다. 반면에 다결정 상태로 증착한 시편은 열처리하는 동안 구조가 거의 변하지 않았고 매우 작은 결정립으로 이루어진 주상구조를 하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.229-235
• /
• 2001

The thermal and photometric properties of mulching materials modify the radiation and energy balance on the mulched soil surface and thereby change the soil temperature. The soil surface energy balances and soil temperatures under the mulching treatments of non-mulched control, recycled paper (RPM), and black polyethylene film (BPFM) were compared before and after the establishment of potato canopy. On August 30 in 1998 when potato was not emerged yet and solar radiation was 17.9 MJ $m^{-2}$${day}^{-1}$ , the net radiation of the soil surface was estimated as 10.(1, 2. 4, and 1.3 MJ $m^{-2}$${day}^{-1}$ under the control, BPFM, and RPM, respectively. The sensible and latent heat loss from the soil surface was 9.65 MJ $m^{-2}$${day}^{-1}$ in the control, most of the net radiation being lost through evaporation and convection, whereas it amounted only to 1.39 MJ $m^{-2}$${day}^{-1}$ in BPFM and 1.36 MJ $m^{-2}$${day}^{-1}$ in RPM. Therefore, the soil heat fluxes were 0.36 1.02, and 0.06 MJ m$^{-2}$ day$^{-1}$ under the control, BPFM and RPM, respectively. On September 27 when potato canopy was fully developed, the soil surface net radiation in the control was sharply decreased as compared to that of Aug. 30, whereas the net radiation of the mulched soil surfaces showed little changes. The soil heat flux was -0.01, 0.95, and 0.12 MJ $m^{-2}$${day}^{-1}$ at the soil surface under the control, BPFM and RPM, respectively. As the mulching treatments brought about such alteration of energy partitioning into the soil, the highest soil temperature was recorded in BPFM and the lowest in RMP without regard to potato canopy development. However, the soil temperature differences among the treatments become smaller when potato canopy were fully developed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.187-192
• /
• 1998

Generally the solidified microstructures of materials consist of the columnar and equiaxed dendritic regions, and many theoretical studies about columnar-to-equiaxed transition have been done because that is closely related to the mechanical and physical properties of products. In this study, the modified equation based on the Hunt's analytical columnar-to-equiaxed transition condition which was derived from heterogeneous nucleation and grain growth in front of the columnar dendrite tip under directional solidification, was obtained applying the growth-velocity-dependent distribution coefficient and liquidus slope to Hunt's. The effects of the number of nucleation sites, nucleation temperature, alloy composition, growth velocity and liquid temperature gradient on the transition for Al-Cu alloys have been investigated.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.335-342
• /
• 2017

This study was carried out to explore a new application of the by-products sawdust, formed during sawing and mandarin peels which are agricultural by-products. The boards were manufactured by mixing the sawdust and mandarin peels at different mixing ratio and density. The boards were then converted to ceramics by various percentage of resin impregnation and at different carbonization temperatures. As the percentage of resin impregnation increased, the weight loss was decreased; on the other hand, density, linear shrinkage and thickness shrinkage increased. As the carbonization temperature increased, the weight loss was increased and linear thickness shrinkage increased to $1000^{\circ}C$ and the subsequent increase was insufficient. As the percentage of mandarin peels addition increased, the weight loss, linear shrinkage and thickness shrinkage was decreased.