• Journal of the Korean Society of Clothing and Textiles
• /
• 제30권3호
• /
• pp.481-486
• /
• 2006

There are attempts to utilize Hanji for apparel material, but, the reason that the strength and durability of Hanji decrease to a great extent in the wet condition, restricts the usability of Hanji. In order to improve the resistance against water, Hanji was treated with silicone type water repellent agents. The treatment was carried out by conventional pad-dry-cure method. The optimum treatment condition was obtained by varying the concentration of repellent agent, curing temperature and time. Water repellency was tested by spray rating method. Wet and dry tensile strength, tearing resistance and abrasion resistance were examined after the treatment. Flexural stiffness and wrinkle recovery angles of hanji were also measured. In result, the optimum condition of treatment was at resin concentration of 40g/l, catalyst concentration of 20g/l(half of resin concentration), curing temperature of 160$^{circ}C$, curing time of 120 sec. Flexural stiffness of Hanji was hardly increased and wrinkle recovery angle of Hanji was improved a little by resin treatment. After the treatment, in dry condition, tensile strength and tearing resistance were little changed but abrasion resistance was improved. In wet condition, tensile strength, tearing strength and abrasion resistance were improved.

• Resources Recycling
• /
• 제19권6호
• /
• pp.36-42
• /
• 2010

Researches on resources recycling in the field of construction have made an extensive progress such as recycled aggregate of waste concrete and recycling of asphalt. On the other hand, there are almost never researches on pavement method with used waste frying oil. In South Korea, 0.2 million ton used waste frying oil is discharged every year. It is guessed that about 0.1 million ton used waste frying oil can be collected. If used waste frying oil is recycled, it is expected that disuse cost will be reduced and water pollution of rivers will be prevented. Therefore, the purpose of the study was to evaluate on mechanical features (strength, water resistance, chemical resistance, abrasion resistance, freezing and thawing resistance and permeable coefficient) whether dense graded permeable concrete mixing silica sand with flexible alkyd resin manufactured by making ester reaction with collected used waste frying oil to make alkyd resin could be applied to road pavement for non-roadway. The results of the study were as follows. In flexural strength, it had 1.6 times as much as road design standard 4.5MPa. In water resistance, chemistry resistance and freezing and thawing resistance, they had lack of strength in early age. As age went by, they didn't have large changes. And curing temperature had phenomenon of increase in strength at rather low temperature than high temperature by glass transition temperature of resin. Therefore, considering workability, strength and durability when it was applied to road pavement, it was reasonable that the mixing ratio of flexible alkyd resin was 10~15% in comparison with silica sand weight.

• Proceedings of the Korea Water Resources Association Conference
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.213-213
• /
• 2015

밭에서의 점적 관개를 이용한 노지 재배의 경우 적정 관개 계획 수립을 위해서는 작물 및 토양의 수분 정보에 대한 정확한 파악이 필요하다. 본 연구에서는 밭 토양을 GIS(Geographic Information System)를 통해 격자 형태로 분할하여 작물의 증발산량 및 토양의 수분함량을 모의할 수 있는 격자 기반 토양 물수지 모형을 개발하였다. 본 모형을 통해 작물의 소비수량 및 필요 수량을 파악함으로써 작부기간 중 필요한 관개수량을 제시하는 것이 가능하다. 고도화 기상자료로는 국가농림기상센터에서 운영 중인 고해상도 WRF(Weather Research and Forecasting) 모형에서 생산된 격자 형태의 복사, 온도, 바람, 강수 자료를 사용하였고 고도화 기상자료의 격자 해상도 별로 모의되는 작물 및 토양의 수분 정보 간 비교 및 분석을 실시하였다. 토양 물수지 모형에 입력되는 격자형태의 자료로는 기상, 토성 및 토지이용 자료가 있으며 기상자료의 경우 가로 및 세로의 크기가 각 270, 810, 2430m로 동일한 3가지 경우로 나누어 적용했으며 토성 및 토지이용 자료의 경우 기상 격자의 최소 크기에 맞춰 가로 및 세로의 크기가 각 270m인 격자로 분할하였다. 이와 같은 과정에 의한 모의 결과 각 격자별 작물 증발산량, 토양수분함량 및 관개수량의 일 연별 시계열 자료를 얻을 수 있으며 동시간대 격자별 수문인자 값을 산정하고 위치에 따른 공간적 상호 상관성을 분석하였다. 결과적으로, 고도화 기상자료의 격자 크기에 따른 밭 토양 물수지 분석 결과를 통해 고도화 기상 격자의 규모별 밭 토양 물수지 분석 효용성을 파악하고자 하였다. 더불어, 시험 지역(Test Bed) 선정을 통해 토양수분 및 증발산량을 실측하고 본 모형의 모의 결과와 비교함으로써 검정하는 것을 향후 연구 계획으로 한다.

• Journal of Conservation Science
• /
• 제31권4호
• /
• pp.373-386
• /
• 2015

This study identified degradation properties by temperature stress with Araldite$^{(R)}$ AY103-1/HY956 used for ceramics. Tensile and compressive strength of durability increased for 6,480 hours at temperature of $34{\sim}45^{\circ}C$. In stability of external stress and temperature, compressive strength is superior to tensile strength, it requires conservation plans considering strength properties and stress of restoration materials. The tensile shear strength of adhesion properties decreased for 4,320 hours at temperature of $40{\sim}60^{\circ}C$. In ceramics with porosity, environments under isothermal-isohumidity are important because interfacial properties of adherend are concerned with performance variation. Glossiness decreased for 6,480 hours at temperature of $34{\sim}45^{\circ}C$ and color difference increased. Gloss stability was superior and color stability was weak, which requires improvement of optical properties. In artifacts on display in museums, there is concern about temperature rise on restoration materials by lighting therefore, it needs to minimize change in physical properties by exposure environments.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.141-146
• /
• 2010

• Proceedings of the Materials Research Society of Korea Conference
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.121-121
• /
• 2005

• The monthly packaging world
• /
• 통권81호
• /
• pp.152-160
• /
• 2000

CHEMICAL PRIMER와 ADHESION PROMOTOR라는 말은 자주 같은 뜻으로 서로 교환되어서 사용되어 왔다. 접착력의 촉진은 분명히 PRIMER로서 얻어지는 두드러진 특징 중에 하나이지만, PRIMER는 내화학성을 더하여 주는 추가적인 가치를 부여해준다. 이 발표문에서는 PRIMER의 TYPE와 접착에 영향을 주는 요인을 다루고 있다. 접착력과 내화학성은 코로나처리, 적용 COATING량, 적용방법 및 건조에 영향을 받는다. 압출수지온도,

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.12-13
• /
• 1988

• Journal of Korean Medical Ki-Gong Academy
• /
• 제5권1호
• /
• pp.65-90
• /
• 2001

• Journal of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.397-405
• /
• 1985

The adsorption behaviors of some oxime compounds well known as metal chelating agents on the Amberlite XAD resins were compared by measuring their distribution coefficients (log Kd) in various media, respectively. Among the oxime compounds, salicylaldoxime (SAO) and $\alpha-benzoinoxime(${\alpha}$-BzO)$ which showed large log Kd values were chosen. The characteristics of XAD-4 resins impregnated with SAO and ${\alpha}$-BzO have been studied to apply them for the adsorption and recovery of minute quantities of metal ions in aqueous solution. The optimum conditions for adsorption of SAO and ${\alpha}$-BzO on the resin were 30% methanol media having pH range of 1~8(for SAO) and 1~9 (for ${\alpha}$-BzO), respectively. The distribution coefficients of two oxime compounds were decreased as temperature increased. From the adsorption enthalpy data of SAO and ${\alpha}$-BzO, ranging from 4.96 to 6.66 Kcal/mol, it is suggested that their adsorption mechanism on XAD-4 resin is likely due to molecular adsorption equivalent to dipole-dipole interaction. The impregnated resins were considerably stable in the aqueous solutions of pH 5.0~10.0 and in 0.1~5M hydrochloric acid solutions. The former is the medium for adsorption of metal ions, while the latter is for recovery of the adsorbed metal ions. The adsorption mole ratio of Mn(II), Co(II), Ni(II), Zn(II) ions on SAO-XAD-4 and ${\alpha}$-BzO-XAD-4 resins were about 1 : 2 at the optimum conditions, respectively. The adsorbed metal ions were recovered completely by eluting with 3M HCl-50% methanol solution