• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.447-450
• /
• 2004

선박에서 발생하는 소음 가운데 수중 추진기 소음은 가장 우세한 소음이다. 추진기 소음은 소나에 의해 적을 탐지하는 군용 선박에 경우 생존과 직결된 문제가 되며 쾌적함과 정숙성을 요구하는 여객선의 경우에서도 중요한 문제로 대두되고 있다. 이러한 중요성과 필요성에 따라, 본 연구에서는 수중 추진기의 비공동 및 공동 소음을 수치적으로 해석하였다. 수중 추진기 소음 해석을 위해 유동 해석이 선행되어야 하며 이는 포텐셜을 기반으로 한 패널법을 이용하여 해석한다. 소음 해석은 시간 영역 음향상사법을 이용하였으며, 공동 소음은 홀극 음원으로 모사하여 해석하였다. 또한 향후 수중 추진기의 날개 끝 볼텍스 캐비테이션 해석을 위한 기초연구로서 Eulerian-Lagrangian 접근법을 이용하여 수중익에서의 날개 끝 볼텍스 캐비테이션의 거동과 소음을 예측하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.443-446
• /
• 2004

추진기에 의한 소음은 선형 특성에 의한 반류 분포, 추진기 재질 및 유체 연동 등 다양한 주변 인자들에 의해 발생하여, 민수용 선박의 경우는 과도한 추진기 수중 방사 소음으로 해양 생태계 교란 및 선박 거주구역 내 과대 소음 형성의 주 요인이 된다. 더구나, 군사용 함정의 경우에는 추진기 유기 소음은 수중 방사소음의 형태로 전파되어 함정/무기 자체에 탑재된 음향센서의 기능을 저하시키는 영향을 줄 뿐 아니라, 원거리까지 전파되는 수중소음으로 인해 치명적인 자기 노출이 되어 적 함정에 의한 피탐 거리 증대라는 전술적 취약점을 초래하는 중요한 요소이다. 본 발표는 삼성 공동수조(SCAT)에서 이루어지는 추진기 유기 소음 측정에 대한 기술적 사항과 모형선-추진기 수조 시험을 통해 구해진 추진기 유기음향과 이론 및 경험식을 토대로 계산된 추진기 소음의 정량/정성적 비교를 통해, 추진기 설계 단계에서 소음수준 예측 도구로의 활용 가능성을 제시하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.3
• /
• pp.247-255
• /
• 2019

In this study, to predict the noise of a submarine propeller which is going to become bigger and faster, the non - cavitating propeller noise was predicted based on the numerical analysis which considering the interaction of the hull - appendages - propeller. In order to predict the radiated noise of the propeller, the flow field for the entire region of hull-appendages-propeller was computed by CFD (Computational Fluid Dynamics). And the noise for the thickness noise and the load noise was numerically predicted using FW-H (Ffwocs Williams-Hawkings) acoustic analogy. Numerical noise prediction results were verified by model tests and showed good agreement with the measurement results in predicting total noise level and low frequency noise.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.6
• /
• pp.387-395
• /
• 2018

In this study, the noise characteristics of the propeller tip vortex cavitation and its inception were analyzed experimentally. Generally, tip vortex cavitation is the first appeared cavity that occurs in a propeller. If propeller tip vortex cavitation is appeared, the level and characteristics of underwater radiated noise changes dramatically compared with the non-cavitating propeller. Therefore, it is very important to analyze the noise characteristics of the propeller cavitation and to detect the cavitation inception in the development of the propulsion system for military vessel and underwater weapon system. The change of noise characteristics due to the inception and growth of the propeller tip vortex cavitation was analyzed. Various imaging-noise measurement and analysis technique were used to determine the inception of propeller cavitation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.344-347
• /
• 2006

Noise reduction and control is an important problem in the performance of underwater acoustic system and on the habitability of the passenger ship for crew and passenger. Furthermore, sound generated by a propeller is critical in underwater detection and is often related to the survivability of the vessel especially for military purpose. Generally propeller noise is often the dominant noise source of marine vehicle. The flow field is analyzed with potential-based panel method, and then the time dependent pressure and sheet cavity volume data are used as the input for Ffowcs Williams-Hawkings formulation to predict the far-field acoustics. Through this study, the dominant noise source of underwater propeller is analyzed, which will provide a basis for proper noise control strategies.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.38-45
• /
• 2021

In this study, changes in cavitation pattern and noise by air injection were investigated experimentally in a cavitation tunnel. Air injection system that can control the location and the amount of air was manufactured and installed in an elliptic wing that exhibits similar characteristics to those of a propeller blade. Various types of cavitation were simulated on the hydrofoil by adjusting the test conditions in the cavitation tunnel, and the changes in cavitation pattern and noise according to air injection were experimentally analyzed. It was shown that the noise characteristics varied depending on the position and the amount of air injection. This means that in order to apply the air injection technology to the propeller, it is necessary to optimize the air injection location and the amount of injection according to the cavitation characteristics.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.268-277
• /
• 2022

In this study, each component of flow noise source of underwater propeller installed to the scale model of the KVLCC2 is investigated and the effect of each noise source on underwater-radiated noise is quantitatively analyzed. The computation domain is set to be the same as the test section of the large cavitation tunnel in the Korea Research Institute of Ship and Ocean Engineering. First, for the high-resolution computation of flow field which is noise source region, the incompressible multiphase Delayed Detached Eddy Simulation is performed. Based on flow simulation results, the Ffowcs Williams and Hawkings integral equation is used to predict underwater-radiated noise and its validity is confirmed through the comparison with the tunnel experiment result. For the quantitative comparison on the contribution of each noise source, the spectral levels of sound pressure and power levels predicted using propeller tip-vortex cavitation, blade surface and rudder surface as the integral region of noise sources are investigated. It is confirmed that the cavitation which is monopole noise source significantly contributed to the underwater-radiated noise than propeller blades and rudder which is dipole noise source, and the rudder have more contribution than propeller blades due to the influence of the propeller wake.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.442-443
• /
• 2013

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.04a
• /
• pp.650-651
• /
• 2014

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.3
• /
• pp.250-261
• /
• 2023

In this study, the noise contributions by the duct, stator and rotor, which are the propulsor components, are evaluated to identify the flow noise source in cavitation and non-cavitation conditions on pumpjet propulsion and the noise levels in both conditions are compared. The unsteady incompressible Reynolds averaged Navier-Stokes (RANS) equation based on the homogeneous mixture assumption is applied on the suboff submarine hull and pumpjet propeller in the cavitation tunnel, and the Volume of Fluid (VOF) method and Schnerr-Sauer cavitation model are used to describe the two-phase flow. Based on the flow simulation results, the acoustic analogy formulated by Ffowcs Williams and Hawkings (FW-H) equation is applied to predict the underwater radiated noise. The noise contributions are evaluated by using the three types of impermeable integral surface on the duct, stator and rotor, and the two types of permeable integral surface surrounding the propulsor. As a result of noise prediction, the contribution by the stator is insignificant, but it affects the generation of flow noise source due to flow separation in the duct and rotor, and the noise is predominantly radiated into the upward and right where the flow separations are. Also, the noise is radiated into the thrust direction due to pressure fluctuation between suction and pressure sides on the rotor blades, and the it can be seen that the cavitation effect into the noise can be considered through the permeable integral surface.