• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.95-103
• /
• 2013

An underwater acoustic (UWA) communication in shallow water is strongly affected by the water surface and the seabed acoustical properties. Every reflected signal to receiver experiences a time-variant scattering in sea surface roughness and a grazing-angle-dependent reflection loss in bottom. Consequently, the performance of UWA communication systems is degraded, and high-speed digital communication is disrupted. If there is a dominant signal path such as a direct path, the received signal is modeled statistically as Rice fading but if not, it is modeled as Rayleigh fading. However, it has been known to be very difficult to reproduce the statistical estimation by real experimental evaluation in the sea. To give an insight for this scattering and grazing-angle-dependent bottom reflection loss effect in UWA communication, authors conduct experiments to quantify these effects. The image is transmitted using binary frequency shift keying (BFSK) modulation. The quality of the received image is shown to be affected by water surface scattering and grazing-angle-dependent bottom reflection loss. The analysis is based on the transmitter to receiver range and the receiver depth dependent image quality and bit error rate (BER). The results show that the received image quality is highly dependent on the transmitter-receiver range and receiver depth which characterizes the channel coherence bandwidth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.217-224
• /
• 2017

This study proposes an evaluation method for time delay function(TDF) of Point Detonation(PD) fuse using underwater explosion and water entry phenomena. Until now, nothing but the naked eyes of an observer or video images have been used to determine whether the TDF of PD fuze is operated or not. The observer has verified the performance of TDF by analysing the shape of the plume formed by underwater explosion. However, it is very difficult to evaluate the TDF of PD fuse by these conventional methods. In order to overcome this issue, we propose a method using underwater sound signal emitted from the underwater explosion of high explosive charge. The result shows that the measured sound signal is in accord with the physical phenomena of water entry of warhead as well as underwater explosion. Also, from the hypothesis test of bubble period, difference on underwater sound analysis between dud event and delay one is proved.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.563-573
• /
• 2002

In this study, reflection of water waves over a train of rectangular submerged breakwaters is experimentally investigated. Measured reflection coefficients of regular waves are compared with predicted coefficients obtained from the eigenfunction expansion method. Although measured coefficients are slightly smaller than predicted ones, the overall agreement is very good.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.8
• /
• pp.569-579
• /
• 2012

Typical Tonpilz type underwater acoustic transducers making use of piezoelectric ceramics detect the magnitude of an acoustic pressure, a scalar quantity, and convert this pressure into a proportional output voltage. The scalar sensor has no directional sensitivity. In this paper, we have proposed a new vector sensor based on the Tonpilz transducer structure, which is sensitive to both the magnitude and the azimuthal direction of an acoustic wave. Validity of this new design has been confirmed with analytic equations and finite element analyses.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.2
• /
• pp.297-306
• /
• 2019

Since the centrifugal force acts on the flow in the curved channel, a transverse water surface gradient occurs and the thalweg is biased toward the outer bank. The submerged vanes may be used to solve various engineering problems of the curved channels. In order to analyze the influence of an attack angle and the distance between the vane arrays on the river bed variation and the superelevation in a bend, movable bed hydraulic experiments were conducted in a $90^{\circ}$ curved rectangular channel of a small-size gravel bed. Installing the submerged vanes in the bend increases the maximum scour depth. But if vanes are installed in a uniform obtuse angle, the scour depth may be reduced. If the flow rate in the channel bend with vanes equals to the channel forming discharge, the location of the maximum scour depth moved to the downstream and the superelevation increased. However if the flow rate is smaller than that, the location of the maximum scour depth moved upstream and the superelevation decreased. The channel bed change and the superelevation due to the installation of the submerged vanes have been dependent on the interaction of the attack angle, the flow rate, and the distance between the arrays.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.106-110
• /
• 1983

As the first step to investigate the effect of ship's motion when detecting target with an echo sounder, variations in the incident sound level at the optional position within the sound beam due to roll motion of the transmitter have been measured and calculated. In this experiment, the transmitter (75 KHz) was mounted to the bottom of a FRP model of the 2,275 G. T. stern trawler and the receiver (75 KHz) was installed at each measuring point within the transmitter's beam. Then, the incident sound level was measured for the roll angles from the free roll test on the model ship. For a range of roll angle of $\pm$20$^{\circ}$from the vertical, the measuring values of the incident sound level at each measuring point were rapidly fluctuated from 12.9% to 78.1 depending on the roll angle, and agreed well with the caculated ones. Consquently, we concluded that the effect of ship's motion when detecting target with an echo sounder should be sufficiently considered.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.187-190
• /
• 2004

본 논문에서는 연안에 서식하는 잘피(Zostera Marina)의 시공간적 분포와 생산성을 파악하기 위해 음향실험을 통한 분석을 시도하였다. 해저면이 니질로 구성된 잘피 서식지에 수평입사각 및 방위각에 따라 120 kHz 및 50 kHz 음원을 이용하여 송${\cdot}$수신 하였다. 수평입사각 및 방위각에 대한 수신 신호의 산란강도를 표현하였으며 그 분포양상이 실제분포와 유사한 경향을 보인다. 각 음원의 주${\cdot}$야간별 신호에서는 산란강도의 차이가 관측되었다. 이를 통해 잘피의 광합성에 의한 공기방울의 음파산란 영향에 대한 가능성을 확인하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1996.06a
• /
• pp.45-50
• /
• 1996

천해에서 얻은 잔향음신호를 역추정 알고리즘으로 분석하여 자료수집 당시의 환경 변수인 해상풍의 세기와 해저면의 상태를 추정하는 방법에 대하여 기술하였다. 소오나 시스템과 잔향음신호 수집 당시의 환경 자료를 알고 있다면 음원에서 방사된 음파가 해수면에 처음 도달하는 시간과 수평입사각을 multipath eigenray model에 의해서 계산할 수 있고 이 정보를 이용하여 수신된 잔향음 신호를 분석하여 해수면에 의한 산란잔향음 준위와 시간을 계산할 수 있다. 해수면 후방산란강도는 수평입사각, 음원의 주파수, 해상풍의 세기 등에 의해 특징지어지며 계산된 잔향음 준위로부터 소오나 방정식을 이용하여 후방산란강도를 알아낼 수 있다. 이 후방산란강도를 입력자료로 하여 Method of Small Perturbation이론과 Chapman과 Harris가 유도한 실험식을 사용하여 입력된 값과 일치할 때까지 후방산란강도를 계산하여 이때의 환경변수를 찾아내었다. 한편 해저면 잔향음신호는 표준화된 후방산란강도값들의 PDF를 만들어 그 분포양상을 분석하였다. 본 논문에서 사용된 알고리즘의 검증을 위해서는 보다 다양한 환경하에서 실시된 많은 음향괸측자료를 필요로 한다.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.140-145
• /
• 2010

This study presents a detection method for mechanically fabricated defects on underwater steel pipes, using ultrasonic guided waves. Three different diameters (60, 90, and 114 mm) of 1000-mm long steel pipes were considered, along with several experimental design factors such as incident angles, incident distances, and the degrees of defects, to investigate how these factors affected the experimental results - the detectability of the mechanical defects. From the experimental results, we determined that the amplitude and arrival time of the first received wave signals gave a promising clue for distinguishing the existence of the defects and their severities. Between the amplitude and arrival time, the arrival time gave a more promising indication since it was affected by the experimental factors in a constant manner. Therefore, it was shown that the use of ultrasonic guided waves for underwater pipe inspection is feasible.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.2
• /
• pp.108-116
• /
• 2015

An acoustic vector sensor is a device that is capable of measuring the direction of wave propagation and the acoustic pressure. In this paper, the modeling of micro-cantilever sensor for the vector sensor are proposed by consideration of acoustic phenomenon in water. Two models based on unimorph structure are proposed in this paper and corresponding transfer function which describes the relation between input pressure wave and output voltage depending on incidence angle and frequency of pressure wave is derived based on lumped model. It has been shown that very thin and flexible micro-cantilever can be used to measure directly the particle velocity component in water.