• 전기의세계
• /
• v.25 no.2
• /
• pp.46-50
• /
• 1976

근년 공업, 토목, 농업용수 및 토수도용등 수중프랜트용으로 사용하는 수중전동기는 이것의 이점과 경제성이 일반적으로 각계에 인식되고 있다. 과거에는 200-400[V]급의 저압용이 주로 제작되었으나 단기용량의 증대와 더불어 3000[V] 또는 6000[V]급의 고압용의 수요가 날로 높아지고 있는 것이 현재의 경향이다. 수중전동기에 있어서의 가장 큰 문제점은 수중에서 운전되는 것이므로 완전한 내수성을 갖어야 하며 수봉식에서는 물윤활베어링을 사용하여야 하는 점, 유봉식에서는 완전한 축봉기구가 요구되며 청수가 아닌 하천용의 것은 수봉식이라 하여도 어느 정도 엄중한 축봉기구가 필요하게 된다는 점들이다. 그림1은 수중전동기의 응용예이며 그림2는 캔식 수중전동기의 구조도이다.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.13-21
• /
• 1991

선박은 사람이나 화물을 수상(水上) 운송수단의 목적으로 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 인류문화의 급속한 발전에 따라 주변생활이 가속화(Speed화), 합리화되어 문명의 혜택을 보다 많이 누리게 된 반면에, 국제간에 파생되는 여러가지 교환현상을 바탕으로 지구는 하나의 촌(村)으로 되어 유통경제를 지배하고 이용하는 운송수단으로 발전되어 왔다. 물질문명이 급속히 발전하는 작금, 선용추진 주 기관의 동향을 살펴보면, 1981년 세계에서 건조한 2000톤급 이상의 선박은 940여척으로 이중 13척이 증기 Turbine. 추진(推進), 나머지는 미끄럼 저속 디이젤 또는 중고속 디이젤 추진으로 되어있다. 이와 병행하여 선박에 쓰여지고 있는 각종 윤활제는 주기관으로서 디이젤 engine, Trubine engine, 가솔린 engine, 석유, engine, 선외기, 왕복동 증기기관, Journal계열로서 역전기, 추력베어링, 중간 베어링, 프로펠러베어링, 일반상선으 보조기계로서 발전기, 공기압축기, Boiler, 각종 Pump, 각종 Motor, 냉동기, 조타장치, Side Thrust, 갑판기계, 환기용 송풍기 및 통풍통, Oil 청정기, 수밀로(水蜜爐), 소화설비, 주기 개방용 천정 크레인, elevator, 어선으로서의 주 기관, 보조기기 등에 쓰여지고 있으며 이밖에 수중날개선 등에도 적용되는 등 실로 다양다종한 윤활제가 요구되고 있음에, 본 논고에서는 제목 건을 중심으로 한 선박과 윤활의 중요 Point만을 간추려 기술하고져 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.121-121
• /
• 2013

수소로 희석된 벤젠 가스를 반응 가스로 이용하여 합성된 DLC 박막의 마찰 마모 특성을 평가하기 위하여, 일반 대기 환경 및 수중 환경에서 마모 실험을 수행하였다. 일반 대기 환경에서는 박막의 기계적 특성, 마찰 계수 및 마모 거동이 거의 변화하지 않았다. 반면, 수중 환경에서는 마찰 계수가 대기 환경에서보다 안정적으로 평가되었다. 이는 DI-water가 윤활제(lubricant) 역할을 하기 때문으로 예측된다. 또, 수중 환경에서의 마모 실험 결과, 수소가 희석되지 않은 반응 가스를 이용하여 증착 된 DLC 박막의 경우, delamination wear가 상대적으로 많이 관찰되었다. 하지만, 반응 가스에 희석 된 수소량이 증가함에 따라서, 이런 delamination wear가 현저하게 억제됨을 관찰하였다.

• Tribology and Lubricants
• /
• v.40 no.5
• /
• pp.170-174
• /
• 2024

This study investigates the lubrication enhancement effects and key mechanisms when graphene is used as an additive under water-lubricated conditions through molecular dynamics simulations. The study models two solid surfaces with a specific roughness values, with water molecules generated using a coarse-grained model placed between them. In cases in which an additive is included, one or three layers of graphene are inserted between the water molecules. The study applies a normal load by moving the two solid surfaces closer together and measures the friction force and atomic stress on the solid surfaces as the upper surface is moved horizontally. The results show that, compared with cases without an additive, both the friction force and friction coefficient are significantly reduced when graphene is added. In addition, the stress on the asperities of the solid surfaces is markedly reduced in the presence of the additive. We confirm that the primary reason for the improved lubrication performance is that graphene, when positioned at the interface, prevents direct contact between the solid surfaces and disperses the contact pressure. Notably, the lubrication performance is found to be nearly independent of the number of graphene layers at the interface.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.5
• /
• pp.484-493
• /
• 2024

This paper discusses the process and results of experimental research aimed at reducing Underwater Radiated Noise (URN) using air injection technology. Air Lubrication System (ALS) is an air injection technology mainly installed and operated to improve the propulsion efficiency of large commercial ship, such as LNGC. Recently, research institutes have been studying the potential of reducing URN using ALS. This paper performs an experiment as part of such research. The experiment was conducted in the Large Cavitation Tunnel (LCT), and the major devices applied in the experiment fall into two categories: ALS, which is directly applied to the model in use for LNGC and a modified air injection belt developed from the Masker-Air System (MAS), which is being developed to reduce URN of naval ships. The environmental conditions for the experiment mainly include the air injection flow rate and flow speed in the LCT. The flow rate was set to the actual air injection conditions of ALS, and the flow speed was adjusted to two different levels, considering the actual speeds of LNGC. The noise reduction performance was confirmed by calculating insertion loss with and without air injection.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.06a
• /
• pp.26-29
• /
• 1986

회전축계의 강제진동으로 가장 전형적이고 공업상 중요한 것은 넓은 의미로서 불평형 진동이다. 불평형은 회전체의 제작상 피할 수 없으며 진동이 전혀 문제가 되지 않는 정도로 제작하는 것은 경제적인 면에서도 불가능하다. 지금까지 미끄럼 베어링으로 지지된 회전축계의 불평형 응답 특성에 대하여는 여러 연구자에 의해 연구가 진행되고 있다. 수중에서 운전되는 펌프는 물의 감쇠작용 때문에 축진동 문제는 적다고 생각되어 펌프의 축진동에 관한 보고는 별로 없다. Black은 펌프의 축진동을 연구하여, 시일부분이 축진동 응답에 큰 영향을 미치는 것을 보였다. 그러나 시일형상에 따른 유체력 평가가 충분히 구명되지 않았기 때문에 환상 시일부분의 틈새,폭경비 및 압력차 등이 펌프진동에 어느 정도 영향을 미치는가가 충분히 검토 되어 있지않다. 이에 저자는 펌프용 시일의 유체력에 의한 진동 특성에 관한 일련의 연구를 진행하여 각종 시일의 유체력을 해석하였고, 이 유체력이 회전축계의 안정성에 미치는 영향을 검토하였으며 범용 안정성해석 프로그램을 개발하였다.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.114-120
• /
• 2013

A superhydrophobic surface means that the contact angle between the solid surface and a water droplet is more than $150^{\circ}$. Materials with a superhydrophobic surface have a self-cleaning function because of the Lotus effect, in which water is not absorbed by the material but rolls off of it. If such a Lotus effect can be applied to the surface of underwater vessels, submarines, torpedos, and so on, enhanced vessels can be made based on this lubricant effect reducing the friction coefficient for the liquid. Because polymer composites can be easily applied in various nanotechniques, they are more advantageous than conventional materials like iron in terms of a superhydrophobic surface. Furthermore, a superhydrophobic surface bring enhanced anticorrosion and ecotechnology because no paint is needed on underwater vessels.

• Tribology and Lubricants
• /
• v.33 no.6
• /
• pp.245-250
• /
• 2017

In this work, we examine pure water and water with nanoparticles to investigate water lubrication characteristics and the effect of nanoparticles as lubricant additives for different substrates. We test carbon-based coatings and metals such as high-speed steel and stainless steel in pure deionized (DI) water and DI water with nanoparticles. We investigate water lubrication characteristics and the effect of nanoparticles based on the friction coefficient and wear rate for different substrates. The investigation reveals that nanoparticles enhance the friction and wear properties of high-speed steel and stainless steel. The friction coefficient and wear rate of both high-speed steel and stainless steel decreases in DI water with nanoparticles compared with the results in pure DI water. The presence of nanoparticles in water show good lubricating effect at the contact area for both high-speed steel and stainless steel. However, for carbon-based coatings, nanoparticles do not improve friction and wear properties. Rather, the friction coefficient and wear rate increases with an increase in the concentration of nanoparticles in case of water lubrication. Because carbon-based coatings already have good tribological properties in a water environment, nanoparticles in water do not contribute toward improving the friction and wear properties of carbon-based coatings.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.295-302
• /
• 2014

The tribological behavior of an Fe-based bulk amorphous alloy while sliding against a AISI 304 disc is investigated using a unidirectional pin-on-disc type tribometer in dry and distilled water environments. The rod-shaped bulk pins are fabricated by suction casting. The crystallinities of the bulk amorphous alloys before and after the friction tests are determined by X-ray diffraction. The friction coefficient and specific wear rate of the amorphous pin in the water environment are found to be twice and thrice as much as in the dry environment at a low applied pressure, respectively. However, at a higher pressure, the friction coefficient and specific wear rate are 0.4 and 1.02 mg/(Nm/s), respectively, in the water environment. A microstructure analysis shows that the worn surface of the alloy is characterized by delamination from the smooth friction surface, and thus delamination is the main wear mechanism during the friction test in dry sliding environment. In contrast, brittle fracture morphologies are apparent on the friction surface formed in distilled water environment. For the sample tested at a lower sliding speed, the XPS data from the oxide layer are similar to those of the pure element with weak suboxide peaks. For higher sliding speeds, all the main sharp peaks representing the core level binding energies are shifted to the oxide region.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2004.11a
• /
• pp.31-36
• /
• 2004

In this paper, fretting wear tests were conducted in air at room temperature (RT) and in water at high temperature and high pressure (HTHP) environment to analyze the wear characteristic. As for the supporting condition between the tube and spring/dimple, the gap of 0.2 mm in air at RT and the normal force of 10 N and the slip of $50\;{\mu}\;m$ in water at HTHP were applied. Four different shapes of spring/dimple specimen (type A, B, C, D) were used. Detail eaxamination of wear scar was also performed using SEM micrographs. As a result, in the case of the spring of truncated wedge, severer wear occurs than the others. Protrusion part was found and larger in air at RT. It is thought that the difference in the wear volume and the protrusion is caused by the different wear mechanism corresponding to the different environment.