• Journal of Ocean Engineering and Technology
• /
• v.24 no.1
• /
• pp.99-105
• /
• 2010

The concentration and size analysis of in-situ suspended particulate material were measured using an optical instrument, LISST-100, in the bottom layer at the three inlets of the Seomjin River Estuary, mouth of Gwangyang bay, and Gwangyang bay-side of the Namhae Bridge. In the Seomjin river estuary and mouth of Gwangyang bay-side of the Namhae Bridge, the in-situ mean grain size of the suspended material changed from a uni-modal distribution with a dominant peak at a coarse fraction to a bi-modal distribution with a secondary peak at the finer particles. Seomjin River. The interactions between suspended particulate concentration and beam attenuation coefficient of suspended particulate matters depended on the supply of finer and coarser particles in the mouth of Gwangyang Bay and Seomjin River. So, interactions reflected difference of the concentration, mean size and sorting of suspended particulate matters. The difference of interaction showed dynamic behaviors to the resuspension and deflocculation processes increased river discharge. This showed that it may be possible to use the interactions between the suspended particle concentration and beam attenuation coefficient to monitor the temporal and spatial distributions of in-situ particles.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.405-412
• /
• 2017

In the present study, two phase flows around a projectile vertically launched from an underwater platform have been numerically investigated by using a three dimensional multi-phase RANS flow solver based on pseudo-compressibility and a homogeneous mixture model on unstructured meshes. The relative motion between the platform and projectile was described by six degrees of freedom(6DOF) equations of motion with Euler angles and a chimera technique. The propulsive power of the projectile was modeled as the fluid force acting on the lower surface of the body by the compressed air emitted from the platform. Qualitative analysis was conducted for the time history of vapor volume fraction distributions. Uncorking pressure around the projectile and platform was analyzed to predict impact force acting on the surfaces. The results of 6DOF analysis presented similar tendency with the surficial pressure distributions.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.327-333
• /
• 2015

This paper aims to manufacture nonwoven fabrics by wet-laid technology using Vectran$^{(R)}$ one of the highly favoured high-performace fiber. In previous study, a novel evaluation on fiber dispersion was studied to select optimum surfactant by the need for the control of fiber dispersion in water with reference to wet-laid nonwoven technology. 3 Types of sulfonate anionic surfactants were chosen and added in a stage of agitation to improve dispersion behavior of fibers in water. It was observed that the state of fiber dispersion in water affected various properties of nonwovens, including appearance, physical properties, and mechanical properties. Nonwoven added SDBS was uniform in web structure, thickness and weight. Its average pore was small in size and consisted of fine pores and the value of porosity was high. Further, the difference of tensile value between 2 directions was the least. Consequentially, as the dispersion behavior of fiber increases, nonwoven shows more balanced and uniform physical properties in all directions.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.345-352
• /
• 2008

The motion of a projectile initiated by the release of highly pressurized air is simulated presuming the flow field as a two dimensional one. The effects of water compressibility on projectile movements are investigated, comparing results based on the Fluent VOF model where water is treated as an incompressible medium with those from the presently developed VOF scheme. The present model considers compressibility of both air and water. The Fluent results show that the body moves farther and at higher speeds than the present ones. As time proceeds, the relative difference of speed and displacement between the two results drops substantially, after acoustic waves in water traverse and return the full length of the tube several times. To estimate instantaneous accelerations, however, requires implementation of the water compressibility effect as discrepancies between them do not decrease even after several pressure wave cycles.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.2 s.146
• /
• pp.177-185
• /
• 2006

Cavitation is the dominant noise source of the marine vehicle. Of the various types of cavitation , tip vortex cavitation is the first appearance type of marine propeller cavitation and it generates high frequency noise. In this study, tip vortex cavitation behavior and noise are numerically investigated. A numerical scheme using Eulerian flow field computation and Lagrangian particle trace approach is applied to simulate the tip vortex cavitation on the hydrofoil. Vortex flow field is simulated by combined Moore and Saffman's vortex core radius equation and Sculley vortex model. Tip vortex cavitation behavior is analyzed by coupled Rayleigh-Plesset equation and trajectory equation. The cavitation nuclei are distributed and released in the vortex flow result. Vortex cavitation trajectories and radius variations are computed according to nuclei initial size. Noise is analyzed using time dependent cavitation bubble position and radius data. This study may lay the foundation for future work on vortex cavitation study and it will provide a basis for proper underwater propeller noise control strategies.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.189-193
• /
• 2007

We developed the doxorubicin-loaded PLGA double-layered microspheres using relatively simple oil-in-water (O/W) solvent evaporation method for sustained release of doxorubicin and investigated the release behavior according to PLGA molecular weight and initial drug loading. The double-layered microsphere was characterized on the surface, the cross-section morphology, the behavior of doxorubicin release for 5 weeks by SEM and fluorescence spectrophotometer. Double-layered microspheres showed smooth surfaces and clear difference between core and outer-shell. As the PLGA molecular weight increased, the release rate of doxorubicin-loaded, double-layered microspheres decreased. These results showed that the release behaviors can be controlled by the variation of molecular weight of PLGA.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.71-81
• /
• 2021

The purpose of this study is liquefaction phenomenon was simulated using the 1g shaking table test. Analysis of liquefaction and Re-liquefaction behavior according to the ground conditions was analyzed when an embankment exists above the ground. The soil used in the experiment was silica sand and the ground composition was a liquefied layer of 50cm (Case 1), a non-liquefied layer of 17.5cm and a liquefied layer of 32.5cm (Case 2). The embankment was formed by fixing the height of 10cm and the slope of the slope at a ratio of 1:1.8. For seismic waves, excitation of a 5Hz sine wave was performed for 8 seconds, and a total of 5 case excitations were performed. In Case 1, it was confirmed that liquefaction occurred at all depths during the first vibration excitation at the free-field and that liquefaction did not occur at all depths except 5cm at the third vibration excitation. At the center of the embankment, liquefaction occurred up to a depth of 20cm during the first vibration excitation, and it was confirmed that liquefaction did not occur at all depths except for a depth of 5cm during the second vibration excitation.

• Nuclear Engineering and Technology
• /
• v.18 no.3
• /
• pp.218-227
• /
• 1986

Studies were conducted to determine the extent of oxidation and same of the mechanical property changes of Zircaloy-4 fuel cladding after it was exposed to hot steam environment. The purpose of these tests was to provide some informations on the embrittlement behavior of CANDU type fuel cladding, which could be experienced under the loss-of-coolant accident conditions. The Zircaloy fuel cladding tubes were exposed in a steam environment at the temperature of 90$0^{\circ}C$, 1,00$0^{\circ}C$. The growth of the ZrO$_2$ layer combined with an oxygen rich $\alpha$-phase layer into the Zircaloy tube material was found as a function of time t and temperature of steam exposure, E=1.1√Dt+0.002 where D is a temperature dependent diffusion coefficient. The tensile strength of the specimens exposed for a short period increased but decreased continuously with further exposure. The circumferential elongation was drastically changed with the exposure time while the hoop strength did't decrease greatly. The X-ray measurement of preferred orientation of the Zircaloy tube material indicated that grains in the as received tube were oriented such that the poles of the basal (0001) planes were predominantly radial, while the poles of the basal plane in the tube materials heattreated at 1,00$0^{\circ}C$ were oriented tangentially. It appears that this reoriented texture may contribute to lessening the decrease of the hoop strength of the heat treated Zircaloy tube material.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.362-371
• /
• 1995

This study describes with the sinking behaviour for the purse seine. The experiment was carried out using three model purse seines of knotless netting. The nettings were woven in same leg length(10.5mm) of polypropylene 170 denier, polyamide 210 denier and polyester 250 denier two thread ply twine, each of the seines were named PP seine, PA seine and PES seine. Dimension of Purse seine models were 420cm for corkline and 85cm for seine depth, each models rigged 65.8g, 50.6g and 35.8g(weight in water) of lead for a leadline, seine models will have the same weight in water. Experiments carried out in the observation channel in a flume tank under still water conditions. Sinking motion was recorded by the one set of TV-camera for VTR, and reading coordinate carried out by the video digitization system. The results obtained were as follows: 1) Netting bundle for PP seine was existence on the surface of the water, spread out a netting by sinking force of sinkers. 2) Netting bundle for PES seine was existence in the middle of corkline and leadline. 3) Average sinking speed of seine margin was fastest for 10.7cm/s of PP seine, followed by 9.7cm/s of PA and 9.2cm/s of PES seines. 4) In all seines, the force of horizontal movement for the seine setting was values of ranged in disregard.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1616-1621
• /
• 2006

하천 지형은 흐름과 유사거동에 의한 세굴 또는 퇴적에 의하여 끊임없이 변한다. 이 연구에서는 최근 하천지형의 변화가 크게 일어나고 있는 한강 신곡수중보 직하류 우안의 고수부지 형성 이력에 대한 조사 및 분석을 실시하였다. 조사결과, 1981년 이전까지 하중도(제주초도)가 안정된 형태로 존재하였으나, 1980년대 중반을 거치면서 하중도는 소멸되었고 1990년대 중반 이후부터 우안에 비슷한 규모의 고수부지가 생성되었음을 알 수 있었다. 이 고수부지의 형성과정을 평가하면 다음과 같다. 1) 초기단계(흐름 변화에 따른 이동사주의 정지): 1995년 이전까지는 하천 내 자연적/인위적 교란에도 불구하고 이열사주 형태의 이동상이 유지되다가 1995년 이후 1988년 준공된 신곡수중보의 직.간접적인 영향을 받는다. 이로 인한 하중도의 소멸이 가중되면서부터 신곡수중보 직하류 우안의 이동사주가 정지하기에 이른다. 2) 성장단계(조석에 따른 부유사 반복 퇴적): 이동상 사주가 정지된 뒤 매일 2회씩 반복되는 조석의 영향을 받은 고농도의 부유사가 정지된 사주 위에 반복되어 퇴적되는 양상이 일어난다. 3) 정착단계(정지사주의 고수부지화): 정지사주에서 부유사가 퇴적하고 갈대와 같은 초본류 식생이 활착하게 되면서 부유사 퇴적은 가중되어 간다. 이러한 과정에서 1999년과 같은 대홍수 때 부유사의 고수부지 내 퇴적이 결정적이었을 것이다. 4) 확장단계(고수부지 확장단계): 대홍수 때 고수부지의 퇴적과 아울러 산재하던 버드나무가 교란을 받아 고수부지에서 새로운 버드나무 군락의 터전을 이루어 밀생하게 된다. 향후 고수부지가 잠기는 규모의 홍수가 빈발할 경우 퇴적층의 유실보다는 부유사 퇴적이 많아져 고수부지는 확장단계에 접어들게 된다.70{\sim}90$ 시간 동안 실험을 수행하였다. 세굴의 측정은 투명한 아크릴로 제작된 수제 내부에 CC카메라를 수제 전 후면 및 측면에 설치하여 월류수제의 세굴 발생을 실시간으로 측정하며 동시에 수제의 각 면에 각각 3개의 압력센서를 설치하여 압력분포를 측정함으로써, 월류수제 주변의 압력변화에 따른 세굴심의 실시간 변화를 비교할 수 있도록 하였다. 수심이 연중 $25{\sim}35m$를 유지하는 H호의 경우 간헐식 폭기장치를 가동하는 기간은 물론 그 외 기간에도 취수구의 심도를 표층 10m 이하로 유지 할 경우 전체 조류 유입량을 60% 이상 저감할 수 있을 것으로 조사되었다.심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을