• Journal of Ocean Engineering and Technology
• /
• v.25 no.1
• /
• pp.49-55
• /
• 2011

The EG/AD/S model ice, originally developed by Timco (1986), was selected as the primary model ice material for the newly built MOERI Ice Model Basin in Korea. However, the existence of a sugar component in the EG/AD/S mixture may cause a serious maintenance problem, as described in certain references. This study focuses on the tests of the mechanical properties of the EG/AD/S and the EG/AD model ice. In order to understand the influence of sugar in the original EG/AD/S model ice and to find a possible substitute for sugar, a series of tests with the EG/AD model ice were performed, and the results were compared to those of the EG/AD/S model ice. The relatively large size of the MOERI Ice Model Basin made it difficult to control the initial strength of model ice, so it took a much longer time to achieve the target strength. In order to obtain a lower strength and stiffness for the model ice, the amount of chemical additives may be varied to achieve the desired strength level. This paper is a preliminary study aimed at seeking a possible substitute for the original EG/AD/S model ice for utilization in a large-scale ice tank. To understand the influence of sugar in the original EG/AD/S model ice, the mechanical properties of the EG/AD/S and EG/AD model ice, such as flexural strength, compressive strength, and elastic modulus, were tested in the laboratory condition and compared to each other. The warm-up procedure seems to be an important factor to reduce ice strength in the tests, so it is discussed in detail.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.4
• /
• pp.634-639
• /
• 1997

In order to obtain the basic knowledges for the effective seed production of Perinereis aibuhitensis, sediment preference, burrow shape and behavior with in burrow were investigated in the laboratory. The highest value in both sediment preference and survival rate of P. aibuhitensis were shown at fine sand below 0.10 mm in the mean diameter. The worm made various types of burrows, such as J, L, O, Y and I shapes. Generally, only one individual inhabits in a burrow with head-up, but when excreting, it positions up-side down.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.632-639
• /
• 2011

In order to design a wave energy generate system, a 6-Degree of freedom motion analysis technique was applied to the three-Dimensional CFD analysis on two floating body and the behavior was interpreted according to the nature of the incoming wave. The waves are generated by the same type of wave in the model of tank using the piston type, but due to the shallow water that is generated from the bottom of the wave energy is attenuated by Ekman boundary layer. According to the wavelength of waves generated by the result of evaluating the behavior of floating body, it is concluded that 0.3m is the maximum amplitude of wavelength of 5m, and 0.15m is the minimum amplitude of wavelength of 1m. 1.06m is the maximum distance between the two floaters of wavelength of 6m.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.167-176
• /
• 2020

The automated fish feed system currently used in Korea supplies a certain amounts of feed to water tanks at a certain time. This automated system can reduce the labor cost of managing aqua farms, but it is very difficult to control intelligently and appropriately the amount of expensive feed that is critical to aqua farm productivity. In this paper, we propose the FIIFF Inference Model( Fuzzy Inference-based Intelligent Fish Feeding Model) that can solves the problems of these existing automatic fish feeding devices and maximizes the efficiency of feed supply while properly maintaining the growth rate of fish in aqua farms. The proposed FIIFF inference model has the advantage of being able to control feed amounts appropriately since it computes the amount of feed using the current water environments and fish activity state of the aqua farms. The result of the feed amount yield experiment with the proposed FIIFF Inference Model represents the effect of saving 14.8% over the eight months of actual feed amount in the aqua farm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.280-283
• /
• 1999

The experiment was carried out in a 10 $\ell$ vessel in order to evaluate the growth and nutritional quality of rotifer, Brachienus rotundiformis fed by different diets (Freshwater Chlorella, Marine Chlorella and $\omega$-yeast) for the high density cultivation. The maximum densities for the rotifer fed on the marine Chlorella, freshwater Chlorella and $\omega$-yeast were $10,900\~12,400,\;9,190\~10,600$ and 2,390$\~$2,750 inds./ml, respectively. Therefore, the maximum densities for the rotifer fed on the marine Chlorella and freshwater Chlorella were higher than that for rotifer fed on the $\omega$-yeast The essential n-3 highly unsaturated fatty acid in rotifer fed on the marine Chlorella was $8.71\%$ which was slightly lower than that in rotifer fed on the $\omega$-yeast, $9.14\%$, while it was higher than that in the rotifer fed on freshwater Chlorella, $4.45\%$. This result indicated that marine Chlorella could be appropriate diet for the high density cultivation of rotifer.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.35-42
• /
• 1976

Larval morphogenesis and infection rates of Cercaria pectinata Huet were investigated in regards to histological changes and mortality of the hard clam, Meretrix lusoria $(R\ddot{o}ding)$, in Buan located on the Western Coast of Korea. The trichocerous cercariae, Cercaria pectinata, and its sporocysts parasitize mainly in the tissues of goand, digestive gland and gills of the hard clams. One branched sporocyst grows into a great number of cylindrical sporocysts, and a heavily infected clam possesses 2,000 to 5,000 cylindrical spo ro cysts. Each of them produces approximately 30 to 70 germinal cells and cercariae. Of 2,639 clams examined 347 individuals $(13.2\%)$ were found to be infected. The infection rates showed seasonal variations, the rate being highest $(29.6\%)$ in July, and lowest $(2.0\%)$ in March. Whereas, the infection rates did not change significantly with the changes of size class of the shell. No infection was observed in Meretrix petachialis (Lamarck) collected from Myeong-ji, Kimhae Gun located near Busan. In the iefected clams, the gametogenesis (oogenesis and apermatogenesis) did not undergo completely, therefore the heavily infected clam seemed to be castrated. Also the tissues of the digestive gland and gills were compressed by the multiplication of the parasites. When they were kept in aquariums in the laboratory, high mortality has occurred in the infected clams. All of the 60 infected clams died within 35 days.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.9 no.1
• /
• pp.61-68
• /
• 1976

For the artificial precocious breeding of abalone effects of changes in environmental parameters, water temperature and light period, on the induction of spawning have been studied. Subtidal specimens of Haliotis discus hannai were collected irregularly for 6 times from April to June 1975 in Chungmu Bay near Jukdo Island, the southern coast of Korea. One hundred and fifty specimens were reared in 4 aquarium tanks in the laboratory and in a creel submerged in the sea during the period of 60 days from April 24 to June 23, 1975. The all groups kept in the four tanks and a creel showed very high spawning rates $(70\~100\%)$, compared to those inhabited the natural environment at sea until right before the spawning time $(0\~50\%,\;average\;16.4\%)$. From the results of the present induced spawning, the parameters can be discussed as follows: It seems likely that photoenvironment may stimulate to produce and secrete some internal substances which may concern to giving the fertilizing ability to the eggs before spawning and to inducing spawning, but the temperature may not be a factor for this concern. For effective precocious breeding, it seems to require that abalones are to be realoed under controlled conditions of darkness below 2,000 lux even during day time for more than 60 days before inducing spawning.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.2
• /
• pp.85-91
• /
• 2006

This study deals with the flow over a flat plate with repeated roughness elements of 2-dimensional rectangular shape, which can be applied into the study on the natural geographical roughness and the turbulent flow on roughened solid surface. Part 1 of the study showed that the ratio between the spacing and the height of roughness elements plays a crucial role in developing the flow pattern near wall surface. The present study complements the turbulence characteristics, the utilization of friction velocity as well as integral parameters. Results confirmed that k-type roughness(s/H=7 or 14) is certainly a more effective means than d-type roughness (s/H=3.5) in thickening the viscous region.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.1-7
• /
• 1999

This paper describes the modification of hull bottom for the air lubrication technique to the passenger boat in service at the Chung-Ju lake, which has a large beam-draft ratio. From numerical analysis of 2-D cavity problem by potential theory, the cavity shape, length and the pressure in cavity are estimated for the simplified geometry of hull bottom, and the non-dimensional parameters affecting air cavity phenomena are investigated. Extensive resistance tests for the model ship which has variation of step height and side strip have been performed to investigate the formation of air cavity and the drag reduction effectiveness. And also, the development of attached cavity to the bottom were observed from the flat bottom made by transparent acrylic plate. From this survey on the modification of bottom shape and the air lubrication technique, the total resistance of model ship could be reduced by about 25% at the design speed compared to the proto type hull form.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.187-196
• /
• 2012

Recently, for the purpose of constructing artificial ecosystem, the public aquarium and experimental mesocosm systems are receiving attention. To design and establish an aquarium and mesocosm system, there is need of several materials for simulating the environment, such as sediments, rocks, and plants. Expecially for sessile mollusks, there must be proper materials to which sessile invertebrates can adhere. Nowadays, many aquariums and mesocosm systems are using dead coral skeletons for sessile mollusks. This study was proceeded to have data on the effect of dead coral skeletons on water qualities with the experiment on the environmental factors. For this purpose, I made glass tank for experiment, chose two types of dead coral skeletons imported from the Indonesia and observed the change of water qualities and decomposition efficiency of TAN (total ammonia-nitrogen), nitrite ($NO_2{^-}$) and nitrate ($NO_3{^-}$). As a result, the lager the surface area was, the more TAN, nitrite and nitrate decomposition rate increased. In addition, coral skeletons covered with crustose algae and bacteria in the tank showed faster TAN, nitrite and nitrate removal rate and stabilization. Accordingly, this experiment suggested that dead coral skeletons could be used as a sub filter for the closed system as well as an adhering plate.