• Title/Summary/Keyword: 수제화

Search Result 49, Processing Time 0.024 seconds

The Suitable Processing Condition for Gelatin Preparation from Yellowfin Sole Skin (각시가자미껍질로부터 젤라틴 제조를 위한 조건의 검토)

  • Kim, Jin-Soo;Kim, Jeong-Gyun;Cho, Soon-Yeong;Kang, Kyung-Soo;Ha, Jin-Hwan;Lee, Eung-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.6
    • /
    • pp.716-723
    • /
    • 1993
  • To utilize effectively fish skin wasted from fish processing, a yellowfin sole skin gelatin was prepared by alkaline extraction method and the physico-chemical properties were examined. Conditions for the suitable extraction and decolorization for gelatin preparation from yellowfin sole skin are as follows: the skin is limed with 1.5% calcium hydroxide solution at $5^{\circ}C$ for 5 days, washed throughly with tap water, extracted with 6 volumes of water ($pH5.0{\sim}7.0$) to dehydrated skin for 3 hours at $50^{\circ}C$, and then bleached with 3% activated carbon. Though yellowfin sole skin gelatin was prepared under above condition, the physico-chemical property values such the melting point and gelling point of that were lower than those of pork skin gelatin. Therefore, the purified yellowfin sole skin gelatin requires a suitable modification operation for more a good quality gelatin manufacture.

  • PDF

A Study on the Preparation of Durable Softening Water-repellenting Agent by Blending Acrylic Copolymer and Fatty Carbamide - I. Water-repellent Finish of Cotton Fabrics - (아크릴 공중합체와 지방산 카르바미드의 블렌딩에 의한 내구유연발수제의 제조에 관한 연구 - I. 면직물에의 발수가공 -)

  • Kim, Young-Keun;Lee, Chong-Min;Park, Eun-Kyung;Park, Hong-Soo
    • Applied Chemistry for Engineering
    • /
    • v.5 no.2
    • /
    • pp.345-356
    • /
    • 1994
  • Each of the three cationized compounds synthesized previously, poly(OMA-co-DAMA)[PODC], poly(DMA-co-DAMA)[PDDC] and poly(EMA-co-DAMA)[PEDC] was blended with waxes, emulsifiers and cationized fatty carbamide(ODTCC) synthesized in this study for the preparation of some durable softening water-repellenting agents, PODCW, PDDCW and PEDCW. The results of washability, tearing strength, crease recovery and contact angle of the cotton fabrics treated with PODCW, PDDCW and PEDCW with and without textile finishing resin, showed remarkable improvement of the physical properties. Rating of water repellency of cotton fabric treated with PODCW was 80, but those treated with PDDCW and PEDCW were not high enough to use in industry. Proper curing temperature of the synthesized water-repelleting agents was $140^{\circ}C$; proper using concentration was 3wt%; sodium acetate was the best catalyst for water-repellenting agents among the used, and proper concentration was 0.6wt%. From the results of reaction mechanism of cellulosic fiber with water-repellenting agent and washability of the fibers treated with water-repellenting agents the prepared water-repellenting agent proved to be durable. Surface structures of cotton fabrics treated with water-repellenting agent were investigated by SEM.

  • PDF

Experimental study on ultra-high strength concrete(130 MPa) (초고강도 콘크리트(130MPa)에 대한 실험적 연구)

  • Cho Choonhwan;Yang Dong-il
    • Journal of the Korea Institute of Construction Safety
    • /
    • v.6 no.1
    • /
    • pp.12-18
    • /
    • 2024
  • High-rise, large-scale, and diversification of buildings are possible, and the reduction of concrete cross-sections reduces the weight of the structure, thereby increasing or decreasing the height of the floor, securing a large number of floors at the same height, securing a large effective space, and reducing the amount of materials, rebar, and concrete used for designating the foundation floor. In terms of site construction and quality, a low water binder ratio can reduce the occurrence of dry shrinkage and minimize bleeding on the concrete surface. It has the advantage of securing self-fulfilling properties by improving fluidity by using high-performance sensitizers, making it easier to construct the site, and shortening the mold removal period by expressing early strength of concrete. In particular, with the rapid development of concrete-related construction technology in recent years, the application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher is expanding in high-rise buildings. However, although high-rise buildings with more than 120 stories have recently been ordered or scheduled in Korea, the research results of developing ultra-high-strength concrete with more than 130 MPa class considering field applicability and testing and evaluating the actual applicability in the field are insufficient. In this study, in order to confirm the applicability of ultra-high-strength concrete in the field, a preliminary experiment for the member of a reduced simulation was conducted to find the optimal mixing ratio studied through various indoor basic experiments. After that, 130 MPa-class ultra-high-strength concrete was produced in a ready-mixed concrete factory in a mock member similar to the life size, and the flow characteristics, strength characteristics, and hydration heat of concrete were experimentally studied through on-site pump pressing.

Analysis of Microbial Diversity in Makgeolli Fermentation Using PCR-DGGE (PCR-DGGE를 이용한 막걸리발효에서 미생물 다양성 분석)

  • Kwon, Seung-Jik;Ahn, Tae-Young;Sohn, Jae-Hak
    • Journal of Life Science
    • /
    • v.22 no.2
    • /
    • pp.232-238
    • /
    • 2012
  • Kumjungsansung-Makgeolli$^{(R)}$ is a traditional Korean rice wine that is fermented from traditional nuruk and rice. In this study, we performed the PCR-denaturing gradient gel electrophoresis (DGGE) analysis targeting the 16S and 28S rRNA genes to characterize bacterial and fungal diversity during Makgeolli fermentation. The predominant bacteria in the PCR-DGGE profile during Makgeolli fermentation were Lactobacillus spp. (Lactobacillus curvatus, L. kisonensis, L. plantarum, L. sakei, and L. gasseri), Pediococcus spp. (P. acidilactici, P. parvulus, P. agglomerans, and P. pentosaceus), Pantoea spp. (P. agglomerans and P. ananatis), and Citrobacter freundii; these were identified on the base of analysis of 16S rRNA gene sequences. The dominant bacterium during Makgeolli fermentation was L. curvatus. The predominant fungi in PCR-DGGE profile during Makgeolli fermentation were Pichia kudriavzevii, Saccharomyces cerevisiae, Asidia idahoensis, Kluyveromyces marxianus, Saccharomycopsis fibuligera, and Torulaspora delbrueckii, and these were identified on the basis of analysis of 28S rRNA gene sequences. The dominant fungal species during Makgeolli fermentation changed from P. kudriavzevii at 0-2 days incubation to S. cerevisiae at 3-6 days incubation. This study suggests that PCR-DGGE analysis could be a suitable tool for the understanding of microbial diversity and structure during Makgeolli fermentation.

The Influence of Fine Particles under 0.08 mm Contained in Aggregate on the Characteristics of Concrete (골재 중 0.08 mm 이하 미립분의 종류가 콘크리트의 특성에 미치는 영향)

  • Song, Jin-Woo;Choi, Jae-Jin
    • Journal of the Korea Concrete Institute
    • /
    • v.25 no.3
    • /
    • pp.347-354
    • /
    • 2013
  • Recently, crushed fine aggregates are being widely used due to the shortage of natural sand. In Korea, the amount of fine particles under 0.08 mm contained in crushed fine aggregates is restricted to be less than 7%, which is similar to the regulations of ASTM but is still very strict compared to the regulations of the other nations. In addition, the crushed aggregates already have in them about 20% of fine particles under 0.08 mm which occurs while they are crushed. The fine particles are not easy to wash out, and also to maximize the use of resources it is deemed necessary to review the possibility of enhancing the limit of the amount of fine particles. Therefore, this study conducted experiments to analyze the characteristics of fine particles under 0.08mm and their influence on the properties of concrete. Experiments using silt and cohesive soil were also done for comparison. In the experiments on fine particles, the methylene blue value was more in the soil dust contained in silt and cohesive soil than in the stone powder contained in crushed fine aggregates. Also, the methylene blue value had a close correlation with packing density and liquid & plastic limit. In the experiments done with concrete, the quantity of high range water reducing agent demanded to obtain the same slump increased as the fine particle substitution rate heightened. However, in the experiment which used stone powder testing the compressive strength and tensile strength of concrete in the same water-cement ratio, there was little change in strength with less than 20% addition of fine particles among the fine aggregates, and no meaningful difference in the amount of drying shrinkage of concrete.

Evaluating Stability and Functionality of Hybrid Erosion Control Dam for Reducing Debris Flow Damage in Forested Catchment Nearby Urban Area (도시생활권의 토석류 피해 저감을 위한 복합형 사방댐의 안정성 및 기능성 평가)

  • Kim, Kidae;Kim, Dongyeob;Seo, Junpyo;Lee, Changwoo;Woo, Choongshik;Kang, Minjeng;Jeong, Sangseom;Lee, Dongkyun
    • Journal of Korean Society of Forest Science
    • /
    • v.107 no.1
    • /
    • pp.59-70
    • /
    • 2018
  • The objective of this study was to develop erosion control dam for preventing disaster in consideration of characteristics of forested catchment near urban area, and to assess its stability and functionality to see its practicability in the field. Two types of hybrid erosion control dams were developed including debris flow prevention dam by using pillar and float board screen type and debris flow control dam by using groyne. Also, review about their static (sliding, overturning, bearing capacity) and dynamic (member force) stability was carried out. According to the result, most of the assessed items met standard safety level although there were some cases where assessed items were short of stability criteria against impact. Also, after miniature flume experiments based on the developed erosion control dam to prove structure function (material catch, deposit), it turned out the dam decreased flow sediment amount and velocity while increasing sediment-capturing capacity by 3.5 times on average compared to the one controlled without erosion control dam. When function of erosion control dam for forested catchment near urban area is quantified based on future flume experiments in a variety of conditions, the dams can be practically used in the urban area, contribution to effectively reducing debris flow damage.

Field Applicability Evaluation Experiment for Ultra-high Strength (130MPa) Concrete (초고강도(130MPa) 콘크리트의 현장적용성 평가에 관한 실험)

  • Choonhwan Cho
    • Journal of the Society of Disaster Information
    • /
    • v.20 no.1
    • /
    • pp.20-31
    • /
    • 2024
  • Purpose: Research and development of high-strength concrete enables high-rise buildings and reduces the self-weight of the structure by reducing the cross-section, thereby reducing the thickness of beams and slabs to build more floors. A large effective space can be secured and the amount of reinforcement and concrete used to designate the base surface can be reduced. Method: In terms of field construction and quality, the effect of reducing the occurrence of drying shrinkage can be confirmed by studying the combination of low water bonding ratio and minimizing bleeding on the concrete surface. Result: The ease of site construction was confirmed due to the high self-charging property due to the increased fluidity by using high-performance water reducing agents, and the advantage of shortening the time to remove the formwork by expressing the early strength of concrete was confirmed. These experimental results show that the field application of ultra-high-strength concrete with a design standard strength of 100 MPa or higher can be expanded in high-rise buildings. Through this study, we experimented and evaluated whether ultra-high-strength concrete with a strength of 130 MPa or higher, considering the applicability of high-rise buildings with more than 120 floors in Korea, could be applied in the field. Conclusion: This study found the optimal mixing ratio studied by various methods of indoor basic experiments to confirm the applicability of ultra-high strength, produced 130MPa ultra-high strength concrete at a ready-mixed concrete factory similar to the real size, and tested the applicability of concrete to the fluidity and strength expression and hydration heat.

Development of BIM-based 3D Modeling Instruction Materials and its Application Analysis for Professional Drafting Subject of Specialized Vocational High School (특성화고 전문제도 과목을 위한 BIM 기반 3D 주택설계 수업자료 개발 및 적용)

  • Kwon, Se-Jeong;Yoo, Hyun-Seok
    • 대한공업교육학회지
    • /
    • v.43 no.1
    • /
    • pp.1-19
    • /
    • 2018
  • As the BIM designing technology has been applied recently in the construction field, architectural design education in the field of work and university has been changing to 3D modeling. Nevertheless, architectural design & drafting education in the construction specialized vocational high school is not responding appropriately to change. Despite the fact that students need to have 3D modeling design ability, there is a very lack of 3D housing design instructional material that can satisfy the change. The purpose of this study is to develop BIM-based 3D modeling instruction material and apply to analyze effect on interest and task performance ability on Housing Design. The 3D modeling instruction material used in this study was developed through four stages of preparation, development, implementation and evaluation according to the PDIE model procedure. Also, the experimental design model for hypothesis testing was used nonequivalent control group pretest-posttest design. Based on the experimental design model, BIM-based 3D modeling instruction material was performed in the experimental group and 2D CAD-based standard instruction material was taught in the control group. Experimental treatment was conducted on the students of construction specialized vocatinonal high school, and applied to the subject of Professional Drafting in the 12 hours. Before and after the experimental treatment, the interest and task performance ability on Housing Design were tested. Based on the test results, we analyzed the effects of the 3D modeling instruction material through the independent samples t-test. The results of the study are as follows. First, BIM-based 3D modeling instruction material was developed of 'Housing Design & Drafting' unit on the subject of Professional Drafting in construction specialized vocational high school. Second, the application of 3D modeling instruction material has shown to be effective in improving students' interest. Third, the application of 3D modeling instruction material has shown to be effective in improving students' task performance ability on Housing Design.

A Study on the History and Species of Street Trees in Seoul (서울시 가로수 역사와 수목 고찰)

  • Song, Suk-Ho;Kim, Min-Kyung
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.38 no.4
    • /
    • pp.58-67
    • /
    • 2020
  • The present study was conducted as part of basic research for selecting species of street trees with historical value in Seoul. It also made up a list of traditional landscape trees for a variety of alternatives. The following results are shown below. As to the history of street trees in Korea, records on to-be-estimated street trees are found in historical documents written in King Yangwon during the second year of Goguryeo Dynasty (546) and King Myeongjong during 27 year of Goryeo (1197). However, it is assumed that lack of clarity is found in historical records. During the 23 year of King Sejong in the early Joseon Dynasty (1441), the record showed that the state planted street trees as guideposts on the postal road. The records revealed that Ulmus spp. and Salix spp. were planted as guidance trees. The street tree system was performed in the early Joseon Dynasty as recorded in the first year of King Danjong document. Pinus densiflora, Pinus koraiensis, Pyrus pyrifolia var. culta, Castanea crenata, Styphnolobium japonicum and Salix spp. were planted along the avenue at both left and right sides. Morus alba were planted on streets during the five year of King Sejo (1459). As illustrated in pieces Apgujeong by painter Jeongseon and Jinheonmajeongsaekdo in the reign of King Yeongjo, street trees were planted. This arrangement is associated with a number of elements such as king procession, major entrance roads in Seoul, place for horse markets, prevention of roads from flood and indication. In the reign of King Jeongjo, there are many cases related to planting Pinus densiflora, Abies holophylla and Salix spp. for king procession. Turning king roads and related areas into sanctuaries is considered as technique for planting street trees. During the 32 year of King Gojong after opening ports (1985), the state promoted planting trees along both sides of roads. At the time, many Populus davidiana called white poplars were planted as rapidly growing street trees. There are 17 taxa in the Era of Three Kingdoms records, 31 taxa in Goryeo Dynasty records and 55 taxa in Joseon Dynasty records, respectively, described in historical documents to be available for being planted as street trees in Seoul. 16 taxa are recorded in three periods, which are Era of Three Kingdoms, Goryeo Dynasty and Joseon Dynasty. These taxa can be seen as relatively excellent ones in terms of historical value. The introduction of alien plants and legal improvement in the Japanese colonial period resulted in modernization of street tree planting system. Under the six-year street tree planting plan (1934-1940) implemented as part of expanding metropolitan areas outside the capital launched in 1936, four major street trees of top 10 taxa were a Populus deltoides, Populus nigra var. italica, Populus davidiana, Populus alba. The remaining six trees were Salix babylonica, Robinia pseudoacacia, platanus orientalis, Platanus occidentalis, Ginkgo biloba, and Acer negundo. Beginning in the mid- and late 1930s, platanus orientalis, Platanus occidentalis were introduced into Korea as new taxa of street trees and planted in many regions. Beginning on 1942, Ailanthus altissima was recommended as street trees for the purpose of producing silks. In 1957 after liberation, major street tree taxa included Platanus occidentalis, Ginkgo biloba, Populus nigra var. italica, Ailanthus altissima, Populus deltoides and Salix babylonica. The rank of major street tree species planted in the Japanese colonial period had changed. Tree planting trend around that period primarily representing Platanus occidentalis and Ginkgo biloba still holds true until now.