• Journal of Korea Multimedia Society
• /
• v.8 no.8
• /
• pp.1099-1107
• /
• 2005

The Guaranteed Frame Rate(GFR) service has been designed to accomodate non-real-time applications, such as TCP/IP based traffic in ATM networks. The GFR service not only guarantees a minimum throughput at the frame level, but also supports a fair share of available resources. In this paper, we propose a cell scheduling scheme which can improve the fairness and the goodput through the traffic control in GFR service. For the evaluation of the proposed scheme, we compare the proposed scheme with the existing scheme in the fairness and the goodput. Simulation results show that proposed scheme can improve the fairness and goodput comparing with the existing buffer management scheme.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.307-307
• /
• 2012

현재 태양전지 시장은 결정질 태양전지가 주류를 차지하고 있으며 이중 상대적으로 재료비가 저렴한 다결정 실리콘 기반의 고효율 태양전지 제작에 대한 연구가 활발히 진행되고 있다. 이에 본 실험에서는 표면 텍스처링 방법에 따른 태양전지 소자의 특성 변화에 대한 실험을 진행하였다. 일반적으로 다결정 태양전지의 경우 산성용액을 이용한 표면 텍스처링을 실시하는데 이 경우 표면에 형성된 텍스처 구조는 산성용액의 등방성 식각으로 인해 반구(Hemisphere) 형태의 구조를 띄게 된다. 이는 표면에서의 광흡수율을 떨어뜨려 태양전지 소자의 효율을 저해하는 원인이 된다. 따라서 본 연구에서는 다결정 실리콘 태양전지의 효율 향상을 위해 레이저를 이용한 차세대 텍스처링 방법에 대한 연구를 진행하였다. 우선 355 nm 파장의 Ultra-Violet (UV) 레이저를 소자 표면에 조사함으로써 $10{\mu}m$의 dot diameter와 depth를 갖는 honey comb 배열의 hole을 형성하였다. 이후 산성용액에 담가 레이저 공정 후의 slag를 제거해 최종적으로 피라미드 형태의 구조를 형성하였다. Suns_Voc 효율 측정 결과 산성용액을 이용한 텍스처링의 경우 개방 전압이 611 mV, 곡선인자가 81%, 효율이 17.32%로 각각 측정되었다. 반면, 레이저 텍스처링의 경우에서는 개방전압이 631 mV, 곡선인자가 83%, 효율이 18.33%로 용액 텍스처링 방법보다 우수한 특성을 보였다. 이는 UV 레이저 텍스처링을 통해 형성된 피라미드 형태의 표면 구조에서의 광흡수율이 산성용액을 이용한 방법보다 우수함을 말하며, 따라서 태양전지의 주요 파라미터가 향상된 결과를 보였다. 본 실험에서는 레이저 텍스처링을 통한 태양전지 제작에 대한 방법을 제시하며, 향후 고효율의 다결정 태양전지 제작에 있어 기여 할 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1A
• /
• pp.16-24
• /
• 2010

High Speed Uplink Packet Access(HSUPA) is a WCDMA Release 6 technology which corresponds to High Speed Downlink Packet Access(HSDPA). Node B Supports fast scheduling, Hybrid ARQ(HARQ), short Transmission Time Interval(TTI) for high rate uplink packet data. It is very important to detect Iub congestion to improve end user's Quality of Service(QoS). This paper proposes Node B Congestion Detection(BCD) mechanism and suggests to use the hybrid of Transport Network Layer(TNL) congestion detection and BCD. It is shown that HSUPA user throughput performance can be improved by the proposed method even with small Iub bandwidth.

• Food Science of Animal Resources
• /
• v.23 no.1
• /
• pp.21-27
• /
• 2003

This study was carried out to investigate the effect of curing method(tumbling and immersion) and curing time (10 min to 48 hrs) on pH, color, product yield, cooking yield, water holding capacity, shear force, and sensory evaluation of cured pork meat with soy sauce. Curing method had an effective on color of cured meat(before cooking), Meats were tumbled for 30 min, followed by 24 hr and 48 hr delay period showed higher lightness than meat immersed for 24 and 48 hrs, respectively. Tumbling processing improved product yield and cooking yield as compared to immersion counterpart. Therefore, tumbled meat had significantly greater product yield(p <0.05) during working time for 30 min. Increasing curing time improved water holding capacity and tenderness. Although curing time had no influence on sensory evaluation, tumbling processing improved sensory evaluation of texture, juiciness, and overall acceptability fer cured pork meat with soy sauce, as compared to immersion counterpart.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.4
• /
• pp.201-209
• /
• 2016

Theoretical maximum methane yield of glucose at STP (1 atm, $0^{\circ}C$) is 0.35 L $CH_4/g$ COD. However, most researched actual methane yields of anaerobic digester (AD) on lab scale is lower than theoretical ones. A wide range of them have been reported according to experiments methods and types of organic matters. Recent year, a MET (Microbial electrochemical technology) is a promising technology for producing sustainable bio energies from AD via rapid degradation of high concentration organic wastes, VFAs (Volatile Fatty Acids), toxic materials and non-degradable organic matters with electrochemical reactions. In this study, methane yields of food waste leachate and sewage waste sludge were evaluated by using BMP (Biochemical Methane Potential) and continuous AD tests. As the results, methane production volume from the anaerobic digester equipped with MET (AD + MET) was higher than conventional AD in the ratio of 2 to 3 times. The actual methane yields from all experiments were lower than those of theoretical value of glucose. The methane yield, however, from the AD + MET occurred similar to the theoretical one. Moreover, biogas compositions of AD and AD + MET were similar. Consequently, methane production from anaerobic digester with MET increased from the result of higher organic removal efficiency, while, further researches should be required for investigating methane production mechanisms in the anaerobic digester with MET.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.4
• /
• pp.628-634
• /
• 2015

The ground red pepper puree was treated with cellulase (C treatment), pectinase (P treatment), amylase (A treatment) and/or enzyme complex (CP, CA, PA and CPA treatment) for 2~8 hours to improve the yield and bioactivity of extracts. And physicochemical and sensory properties of red pepper extracts were evaluated. The extraction yield of the control was 38.84%, which was lower than those of the enzyme treatments. And extraction yields of enzyme complex treatments were higher than that of single enzyme treatments. Especially, extraction yield was increased to 74.37% by cellulase + pectinase + amylase complex treatment (CPA treatment). The soluble solid and reducing sugar contents were higher in the extracts treated with enzymes compared with the control. CA and CPA treatment showed the highest soluble solid and reducing sugar contents. No significant changes in lightness, redness and yellowness of the control and the samples by enzyme treatments were observed during 2~8 hours experiments. The sensory evaluation results revealed that panelists preferred the extracts with enzyme treatments to the control. Therefore, enzyme treatment for red pepper extracts is a good method to improve the yield and sensory properties.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06d
• /
• pp.311-314
• /
• 2011

Wi-Fi 메쉬 네트워크는 IEEE 802.11 표준을 기반으로 노트북, 스마트폰 등의 무선 단말에 인터넷 연결을 제공하기 위한 무선 다중 홉 네트워크이다. Wi-Fi 메쉬 네트워크에서는 무선 채널의 방송 특징으로 인해 발생하는 간섭(Interference) 때문에 프레임 충돌 문제가 발생한다. 본 논문에서는 이러한 프레임 간섭을 미연에 방지하는 스케줄링 MAC 프로토콜을 제안한다. 제안하는 방법은 각각의 무선 채널에서 간섭 조건을 만족하는 링크 조합을 결정하고, 이를 통하여 Wi-Fi 메쉬 네트워크의 프레임 전달 수율(Throughput)을 극대화함을 목표로 한다. 시뮬레이션 결과를 통해 본 논문에서 제시하는 스케줄링 MAC 프로토콜이 기존에 알려진 CSMA/CA 기반의 MAC 프로토콜에 비해 수율을 50 % 이상 향상함을 보인다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.583-583
• /
• 2013

화학 기상 증착법(Chemical Vapor Deposition)이나 플라즈마 식각(Etch) 등의 반도체 공정에서 챔버 내벽의 상태에 대한 모니터링은 매우 중요하다. 챔버 벽면에 증착된 유기 또는 무기 물질이 다시 떨어져 나와 불순물 입자 형성의 원인이 되며, 플라즈마를 원하지 않는 상태로 바꾸어 놓아 공정 조건이 달라질 수도 있기 때문에 반도체 제조 수율 저하를 초래하기도 한다. 본 연구에서는 챔버 벽면이 증착되는 환경에서 평판형 탐침을 삽입하여, 증착된 박막의 두께측정 기술을 개발하였다. 전기적으로 부유된 평판 탐침에 정현파 전압을 인가하고 이 경우 플라즈마로부터 들어오는 전류의 크기 및 위상차 측정을 통해 대략적인 증착 박막 두께를 측정 하였다. 플라즈마와 챔버 벽 사이에 존재하는 쉬스의 회로 모델을 적용하여 플라즈마 상태에 무관하고, 가스 종류 및 유량, 입력 전력, 챔버 내부 압력등의 외부 변수에도 독립적으로 측정이 가능하였다. 본 연구는 반도체 장비에서 내벽 모니터링을 통해, PM 주기 조정을 최적화 시키는 잣대의 역할을 할 수 있을 것이다. 더 나아가, 반도체생산 수율 향상에 많은 도움이 될 것이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.109-117
• /
• 1999

In this paper, improved lamp type ownizer( ILO ), which utilizes the superposition of lamp type ownizer( LO ) and surface discharge operation, is designoo and manufactured for the purpose of characteristic improverrent of an LO employoo for installation of environrrent improverrent and good health using Ultraviolet(U.V.) photochemical reactions Irethoc1s. The ownizer consists of 2 types( LO and ILO ), and owne concentration, owne generation and owne yield were investigated in accordance with discharge power and quantity of suwlioo gas. The results of owne concentration, owne generation and owne yield were ILO > LO. So, owne generation characteristics of the lamp type ownizer were improved. At a discharge power of 19[W], owne concentration, owne generation, and owne yield of the ILO are each improvoo than LO 124[%] at the gas flow $1[\ell/min]$ and 143[%] at the gas flow $1[\ell/min]$. The maximum values of owne concentration, owne generation and owne yield were found as 712[ppm], 128[mg/h] and 6750[mg/kWh] respectively.tively.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.2
• /
• pp.65-70
• /
• 2015

In the PCB(Printed Circuit Board) manufacturing industry, the yield is an important management factor because it affects the product cost and quality significantly. In real situation, it is very hard to ensure a high yield in a manufacturing shop because products called chips are made through hundreds of nano-scale manufacturing processes. Therefore, in order to improve the yield, it is necessary to analyze main fault process and equipment that cause low PCB yield. This paper proposes a systematic approach to discover fault-causing processes and equipment by using a logistic regression and a stepwise variable selection procedure. We tested our approach with lot trace records of real work-site. A lot trace record consists of the equipment sequence that the lot passed through and the number of faults for each fault type in the lot. We demonstrated that the test results reflected the real situation of a PCB manufacturing line.