• Journal of the Korean Chemical Society
• /
• v.42 no.6
• /
• pp.618-628
• /
• 1998

Pure CaO, Mn-doped CaO, Mn/CaO, and K/CaO catalysts were prepared and tested as catalysts for the oxidative coupling of methane in the temperature range of 600 to 800$^{\circ}C$ to investigate the effects of Mn- and K-addition on the catalytic activity of calcium oxide. To characterize the catalysts, X-ray powder diffraction(XRD), XPS, SEM, DSC, and TG analyses were performed. The catalytic reaction was carried out in a single-pass flow reactor using on-line gas chromatography system. Normalized reaction conditions were generally $p(CH_4)/p(O_2)=250$ Torr/50 Torr, total feed flow rate=30 mL/min, and 1 atm of total pressure with He being used as diluent gas. Among the catalysts tested, 6.3 mol% Mn-doped CaO catalyst showed the best $C_2$ yield of 8.0% with a selectivity of 43.2% at 775$^{\circ}C$. The $C_2$ selectivity increased on lightly doped CaO catalysts, while decreased on heavily doped CaO([Mn] > 6.3 mol%) catalysts. 6 wt.% Mn/CaO and 6 wt.% K/CaO catalysts showed the $C_2$ selectivities of 13.2% and 30.9%, respectively, for the reaction. Electrical conductivities of CaO and Mn-doped CaO were measured in the temperature range of 500 to 1000$^{\circ}C$ at Po2's of $10^{-3}\; to\;10^{-1}\;atm.$ The electrical conductivity was decreased with Mn-doping and increased with increasing $P0_2$in the range of $10^{-3}\;to\;10^{-1}\;atm,$ indicating the specimens to be p-type semiconductors. It was suggested that the interstitial oxygen ions formed near the surface can activate methane and the formation of interstitial oxygen ions was discussed on the basis of solid-state chemistry.

• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.424-431
• /
• 2017

This study was conducted to set the optimum nutrient solution concentration by growth stage for new strawberry cultivars 'Berrystar' and 'Jukhyang'(Fragaria ${\times}$ ananassa Duch. cvs. 'Berrystar', 'Jukhyang') grown through hydroponics to improve the quality and yield. Three different EC levels were applied to the nutrient solution. The treatment levels were 0.7, 1.0 and 1.3 times higher than the nutrient concentration standard for 'Seolhyang' based on the 'Manual for strawberry cultivation' of Rural Development Administration. Based on the results, there were no significant differences in growth of 'Berrystar' by EC level. 'Jukhyang' showed the most vigorous growth grown in 1.3 times higher nutrient concentration. While the growth of 'Berrystar' and 'Jukhyang' grown in higher EC level has leaves with more chlorophyll concentration. However the quantum yield of leaves was not affected by the treatments. On the treatment with 1.3 times higher EC level, the weight, length, width and firmness of 'Berrystar' and 'Jukhyang' were significantly high. The sugar contents of the harvest analyzed by HPLC did not differed particularly, but the percentage composition of reducing sugar and non-reducing sugar were presented differently depending on the treatments. Marketable fruit yield increased as nutrient concentration increases. However, there were no large differences by treatments. Meanwhile, 'Jukhyang' showed significant difference by nutrient concentration and had the largest yield for a treatment grown in 1.3 times higher EC level. Based on these results, it is recommended to provide the same nutrient solution concentration level to the nutrient concentration standard of 'Seolhyang' for 'Berrystar', and the 1.3 times higher level for 'Jukhyang'.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.3
• /
• pp.404-410
• /
• 2014

The effects of treatment with various complex carbohydrases such as Pectinex, Celluclast, Viscozyme, and Ultraflo on the physiochemical properties, polyphenol extraction yields and antioxidant activities of pear peel and pear core were investigated. When pear peel and pear core were treated with complex carbohydrases, the soluble solid content of peel increased, whereas it did not change significantly in the case of pear core. When pear peel and pear core were treated with Pectinex, significant improvement of soluble solid content was observed along with the highest extraction yield of reducing sugar content. Total sugar content increased in most of the enzyme treatment groups. In the case of pear peel, the Viscozyme treatment group showed the highest total polyphenol contents, total flavonoid contents, DPPH radical scavenging activity, ABTS radical scavenging activity, and SOD-like activity. When the flesh and core of pear were treated with Celluclast, total polyphenol contents increased. All enzyme treatment groups except for the Ultraflo treatment group showed increases in total flavonoid contents. With regard to pear flesh, the Celluclast group showed the highest DPPH radical scavenging activity. When pear core was treated with the four complex carbohydrases, DPPH radical scavenging activity and ABTS radical scavenging activity did not increase significantly. However, the SOD-like activity of all enzyme treatment groups significantly increased. Consequently, dry matter and soluble solid contents, polyphenol content, and antioxidant activity of pear peel and core could be improved by complex carbohydrase treatment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1344-1350
• /
• 2016

The purpose of this study was to evaluate the effect of edible coating on hygroscopicity and quality characteristics of a freeze-dried Actinidia arguta snack. Freeze-dried A. arguta snacks were coated with various edible coating materials such as albumin, dextrin, and whole soy flour. There were no significant effects of coating on major quality properties such as moisture content, water activity, yield, water soluble index, water absorption index, and rehydration properties of all samples. Compared with non-coated samples, edible coated samples effectively inhibited hygroscopicity as a function of hygroscopic time. The samples coated with dextrin showed lower hygroscopicity than the other coated samples. In addition, the effects of edible coating treatment on hardness, total phenolic content, and antioxidant activity measured by 2,2-diphenyl-1-picrylhydrazyl radical scavenging activity were investigated. Edible coated samples had higher hardness, total phenolic content, and antioxidant activity than the non-coated samples as a function of hygroscopic time. Among edible coating materials, dextrin was the most effective coating material. Dextrin as an edible coating material for freeze-dried A. arguta snack may help to prevent hygroscopicity and extend market quality and shelf-life during storage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1839-1846
• /
• 2015

The purpose of this study was to evaluate the effects of cultivar and milling degree of barley on quality characteristics of Makgeolli as well as compare differences between barley Makgeolli and rice Makgeolli. Saessal-bori groups (Ss-4, Ss-12, and Ss-18) showed dry lees contents of 92.3 g, 69.4 g, and 63.8 g, respectively, whereas Huinchalssal-bori groups (Hcs-6, Hcs-14, and Hcs-20) showed contents of 62.3 g, 42.2 g, and 32.2 g. There were significant differences in quality characteristics between milling degrees and cultivars (P<0.05). The moisture, ash, crude protein, and crude fat contents of raw materials decreased with elevated milling degree. Especially, ash content of raw materials had a direct effect on Makgeolli. The pH, total acidity, and amino acidity milling with elevated decreased degree. There were no differences in total sugar or alcohol content in Makgeolli according to milling degree of barley, whereas there were significant differences between cultivars. Barley Makgeolli showed total sugar and alcohol contents of $10.7{\sim}11.8^{\circ}Brix$ and 14.07~15.07%, respectively, which were significantly lower than $12.0{\sim}12.2^{\circ}Brix$ and 17.27~17.77% in rice Makgeolli (P<0.05). Differences in colors of raw barley according to milling degree had effects on chromaticity of Makgeolli; as milling degree increased, L and b values increased. Lactic acid bacteria counts were 7.21, 6.99, and 6.67 log CFU/mL in Ss-4, Ss-12, and Ss-18, respectively, as well as 6.14, 5.39, and 5.65 log CFU/mL in Hcs-6, Hcs-14, and Hcs-20, which suggests significant reductions with increased milling degree (P<0.05). The same trend was observed in yeast as a key quality of Makgeolli. Suspension stability differed depending on milling degree, so it is expected that suspension stability can be improved by adjusting milling degree.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.1
• /
• pp.59-64
• /
• 2003

We fabricated mixed ionic-electronic conducting membranes, $CH_4\;Using\;{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$, by solid state reaction method for solid oxide fuel cell. The membranes consisted of single perovskite phase and exhibited high relative density, $>95\%$. We coated $La_{0.6}Sr_{0.4}CoO_{3-\delta}$ layer using screen printing method in order to improve surface reactivity of the $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$. As a result, the oxygen permeation flux of the coated $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$ showed higher value, $0.5ml/min{\cdot}cm^2\;at\;950^{\circ}C$ than the uncoated one. Higher oxygen permeation was observed in the porously coated Lao $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$membranes with larger grain sizes. Syngas, $CO+H_2$, was successfully obtained from methane gas, $CH_4$, using the $La_{0.6}Sr_{0.4}CoO_{3-\delta}$ coated $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$, with over $40\%\;of\;CH_4$ conversion and syngas yield. $La_{0.7}Sr_{0.3}Ga_{0.6}Fe_{0.4}O_{3-\delta}$ membrane was stable even when it was exposed to the reducing environment, methane, for 600 hrs at $950^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.655-661
• /
• 1995

This study was conducted to get basic information of dry matter production and agronomic characteristics for increasing grain ripening in rice cultivar with large grains. Three cultivars which have different grain size were used. Of the two large grain cultivars, SR7796-3-1-5-1-l(SR7796F$_{7}$) had long culm and SR11269-13-3-4-2(SR11269F$_{6}$) had short culm. On the other hand, Tamjinbyeo was recommended cultivar had medium size of grain and culm. LAI was highest in Tamjinbyeo, followed by the SR11269F$_{6}$ and SR7796F$_{7}$, LAI decrement was higher in large grain cultivars than that of Tamjinbyeo after 20days after heading. Total dry weight(TDW) of areal part was highest in SR11269F$_{6}$, followed by the Tamjinbyeo and SR7796F$_{7}$. Dry weight (DW) of stem (leaf sheath+culm) at harvesting stage was decreased 15%, 12% in Tamjinbyeo, SR11269F$_{6}$, respectively, but was increased 5% in SR7796F$_{7}$ compared to heading stage. In distribution rate of each organ to TDW, distribution rate of leaf blade was low in large grain cultivar, but that of stem in Tamjinbyeo, SR7796F$_{7}$ and SR11269F$_{6}$ was 36%, 38% and 42%, respectively. In canopy architecture leaf blade weight was the highest 30~40cm, 40~50cm and 70~8Ocm above the ground in SR11269F$_{6}$, Tamjinbyeo and SR7796F$_{7}$, respectively. Range of panicle distribution in the canopy was 40cm in Tamjinbyeo, and was 70cm in large-grain cultivars. The results suggest that it has to take a growing interest in developing culture method for increasing LAI during growth stage, especially, around heading, in keeping green leaf till ripening stage and also in growing unformly plant within rice hill in large grain cultivars.cultivars.ltivars.

• Korean Journal of Food Science and Technology
• /
• v.21 no.1
• /
• pp.154-163
• /
• 1989

This studies were designed to improve the productivity of L-lysine by protoplast fusion and immobilized system of fusants using strains of Brevibacterium flavum ATCC 21528, Brevibacterium lactofermentum ATCC 21086 and Corynebacterium glutamicum 820. Mutants were isolated with concentration method of $300{\mu}g/ml$ penicillin-G after treatment of $250{\mu}g/ml$ N-methyl-N-nitro-N-nitrosoguanidine. B. flavum $37-2(Hos^-,\;Kan^r,\;AEC^r)$, B. lactofermentum $6-2(Ile^-,\;Val^-,\;Str^r,\;AEC^r)$ and C. glutamicum 57-5$(Met^-,\;Thr^-,\;Rif^r,\;AEC^r)$ were isolated from mutants. Protoplasts were induced by being incubated with $500{\mu}g/ml$ lysozyme of lysis solution for 6 hr and the ratio of protoplast formation and regeneration were ranging from 97-99% and 33-37%, respectively. Fusion frequencies of fusants of BBFL 21, BCFG 37 and BCLG 59 were shown in the range from $1.25{\times}10^{-6}\;to\;5.83{\times}10^{-7}$ under the optimum conditions. The fusant BBFL 21 showed the highest productivity of $411.1\;ng/ml{\cdot}hr$ L-lysine in the lysine productivity broth at $30^{\circ}C$ for 72hr. In the immobilization systems, fusant BBFL 21 was employed in various polymer matrices such as sodium alginate, polyacrylamide, agar and ${\alpha}-carrageena$. The immobilization of sodium alginate showed the highest productivity of $413\;ng/ml{\cdot}hr$ L-lysine in the batch system. Continuous fermentation of immobilization system by using tube fermentor was produced the highest productivity $416.7\;ng/ml{\cdot}hr $ L-lysine under optimum condition.

• Food Science and Preservation
• /
• v.20 no.5
• /
• pp.659-667
• /
• 2013

This study was performed to determine the effects of the blanching condition (immersion ratio 1:15 (w/v) for 3 min at $95^{\circ}C$, and solution containing 1% sodium chloride) and selected forming agents (dextrin DE=10, dextrin DE=20, ${\beta}$-cyclodextrin; each forming agents added 5%) on the phytochemical compounds and quality characteristics of Ligularia fischeri leaves. The moisture was not affected by the forming agent. The color of a, b and chroma values were low in the blanching treatment groups and were significantly lowest with ${\beta}$-cyclodextrin (CD). The polyphenol and flavonoid contents in the blanching treatment groups were higher than those in the non-blanching-treatment group. The ascorbic acid content was higher in the non-blanching-treatment group and was significantly highest in the group treated with dextrin (DE=10) whereas the blanching treatment groups showed lower dehydroascorbic acid content than the non-blanching-treatment group. The water absorption was higher in the non-blanching-treatment group and was significantly highest in the group treated with CD. The water solubility in the blanching treatment groups treated with dextrin (DE=20) and CD was higher than that in the blanching treatment group treated with DE=10. The total chlorophyll and chlorophyll a and b contents were high in the blanching treatment group treated with CD, and for the total carotenoid contents, the same tendency as that seen with the chlorophyll content was observed. With regard to the particle diameter, those in the blanching treatment groups were lower than that in the non-blanching-treatment group and was significantly lowest in the blanching treatment groups treated with DE=20 and CD. The result of SEM observation showed that the spray-dried powders in blanching treatment groups treated with the DE=20 and CD forming agents had uniform particle distribution.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.190-201
• /
• 1980

This experiment was designed to optimize the process of manufacturing the soybean cheeses and to elucidate the chemical changes during ripening when the chemical changes during ripening when the milk components and enzyme preparations were added to the raw materials. Conditions for extracting soybean protein such as temperature, duration and amount of water added were determined; various coagulaters were compared by checking the curd texture and yield; starters from S. thermophilus, S. lactis MLB and S. cremoris EB-9 were tested as single- or multi-stain combinations; and the effects of skim milk and/or rennins-both microbial and calf origin-addition upon the process of manufacturing and ripening were studied. The results obtained were as follows. 1. optimal conditions for soybean extraction were found to be: temperature $100^{\circ}C$, duration 10 minutes, and amount of water added 9-fold, as considered the extraction rate of solids and proteins, and curd yield. 2. Sodium gluconate was the most effective among the coagulators tested, and 5% of single-strain starter from S. thermophilus was appered to be adequate inoculum for curd formation. 3. The effects of skim milk and/or rennins addition on the process of manufacturing and ripening of soybean cheeses were: 1) The addition of rennins resulted in fast formation of curd, especially with skim milk it was so. And Hansen rennet extracts brought better results in curd formation than Meito rennet extracts did. 2) No significant effect was observed on the changes in moisture content during ripening, however the levels of moisture contents in the products were higher in case of using Meito rennet extracts. 3) Effect on pH changes during ripening was also not significant in general, while levels of pH were decrease markedly during manufacturing and the initial stage of ripening. 4) The levels of bacterial counts were much higher in case of skim milk addition throughtout the ripening period. In general the numbers were reached to approximately $10^8cells/g$ during manufacturing, then decreased gradually to below $10^2cells/g$ in 8 weeks of ripening. 5) The addition of skim milk and/or rennin resulted in higher ripening index, and skim milk plus Meito rennet extracts was appeared to be best combination for the ripening index.