• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.882-888
• /
• 2002

This paper proposed a bias stability circuit that compensates the degradation of MMIC's performance for the variation of the process and temperature. The proposed bias circuit proved the superior effect compared with the conventional bias circuit using the constant current source. It designed and fabricated simultaneously two amplifier on one layout for comparison in same conditions. One is amplifier with conventional bias circuit using constant current source and the other is amplifier with proposed bias stability circuit. The chip was measured the microwave performances under process variation that classed the level NOM, MIN and MAX. The amplifier with a conventional bias circuit using constant current source has 6.4 dB gain variation and 7 mA Ids variation at 1.8 GHz, but the amplifier with the proposed bias circuit has the 2.1 dB gain variation and 3 mA Ids variation. As the result, MMIC having the proposed bias circuit shows the superior compensation of the quiescent point than the MMIC having the conventional bias circuit under the variations of the process and temperature and can improve the yield of the MMIC. The fabricated chip size is 1.2 mm $\times$ 1.4 mm.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.75-75
• /
• 2012

탄소섬유는 전구체의 종류에 따라 PAN계, 피치계 그리고 레이온계로 나뉘며 최종 탄소섬유의 특성에도 차이가 있는 것으로 알려져 있다. 최근에는 PAN계 탄소섬유가 세계 시장의 대부분을 차지하고 있으며, PAN계 탄소섬유의 초경량, 고강도, 고탄성, 내약품성 그리고 열안정성 등의 우수한 특성으로 최첨단 고기능성 제품의 복합재로 많이 이용되고 있다. 그러나 탄소섬유가 가지고 있는 높은 열전도성은 적용에 따라 단점으로 작용될 수도 있다. 예를 들면, 로켓 엔진의 노즐이나 원자로의 구조물 그리고 극한조건용 구조재료 등, 고강도 단열특성을 요하는 최첨단 복합재로 응용 범위를 넓히는데 한계로 작용한다. 레이온은 최초의 탄소섬유 전구체였으나 공정상 경제성이 떨어지는 이유로, 지금은 고탄성을 요구하는 특수 목적으로만 소량 생산되고 있다. 레이온의 주원료는 셀룰로오스이며 셀룰로오스는 지구상에서 가장 흔한 재료이므로 오늘날 셀룰로오스를 보강재로 이용하려는 연구가 활발히 진행되고 있다. 본 연구에서는 탄소섬유의 열전도도를 낮추기 위한 방법으로 안정화셀룰로오스를 첨가한 PAN용액을 출발물질로 탄소섬유를 제조하고 특성 연구를 진행하였다. PAN용액에 셀룰로오스의 분산성을 향상시키기 위해 셀룰로오스를 열처리하였다. 이 과정에서 얻어진 안정화 셀룰로오스의 수율을 높이기 위해 셀룰로오스를 난연 처리하였으며, 그 결과 안정화셀룰로오스의 수율을 향상시킬 수 있었다. 안정화셀룰로오스를 첨가시킨 PAN계 탄소섬유의 물리적, 기계적 그리고 열적 특성을 SEM, XRD, 만능 인장시험기, TGA 그리고 Laser Flash Method 등을 통해 주요 특성 및 변화를 관찰한 결과, 순수한 PAN계 탄소섬유의 특성과 유사한 결과를 얻었다. 향후 몇 가지 공정상의 문제점을 개선한다면 흥미로운 결과를 기대할 수 있을 것으로 본다.

• KSBB Journal
• /
• v.9 no.2
• /
• pp.200-210
• /
• 1994

In batch bioreactor fermentations for cyclosporin A (CyA) production, good potential for bioprocess improvement was demonstrated in the immobilized cell system, providing appreciably better utilization of the catalytic activity of the biomass than the freely suspended cells, especially during the exponential phase. When concentrated nutrient medium was added pulsely during the exponential phase of cell growth(at hour 139 of fermentation), reactivation and regermination in both immobilized and suspended cell cultures were observed to contribute to the longevity of CyA production, maintaining maximum CyA titre until 250 hours of fermentation. Contrarily, simple batch fermentations without any supplement of medium in both systems showed repid decrease in CyA concentrations during the late stationary phase. Notably, the CyA yield coefficient $(Y_p/x)$ for the immobilized cell system was maintained quite high even after the pulse addition of the concentrated full medium, reaching almost 80% of the level attained during the exponential phase. This is in sharp contrast when compared with the corresponding value of 58% in the case of parallel-suspended cells. This pattern of CyA production resulted in considerably enhanced CyA production in the immobilized cell system, reaching almost 2 time higher maximum CyA production in comparison with the free cell system.

• Journal of the Korean Institute of Gas
• /
• v.19 no.5
• /
• pp.7-12
• /
• 2015

Hydrogen is usually produced by using syngas generated by the fuel reforming for natural gas so far. The further process is needed for increasing the hydrogen yield of syngas. However, the process for upgrading the hydrogen yield is accompanied by additional energy sources and economic costs. Thus related studies on the method for using as a mixture in itself have been conducted in order to utilize more efficiently syngas. The effect on the engine performance for methane/syngas mixture of 30kW spark ignition gas engine for power generation has been investigated in this study. As a result, it was found that the combustion phenomena such as the maximum in-cylinder pressure and crank angle at that time have been improved by methane/syngas mixture. Through these, fuel conversion efficiency could be enhanced by about 98% of methane/hydrogen mixture and $NO_x$ emissions could be reduced by about 12% of methane-hydrogen mixture.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.176-182
• /
• 2008

It is the paper that this study develops the small plate-type ozonizer(PTO) for improvements of indoor air and water, and investigated the characteristics. Electric discharge area of ozonizer of each form is same to 60[$cm^2$] and discharge power is the maximum 30[W]. Ozonizer of various forms was devised according to size, numbers and arrangement. The main study object is discharge power-ozone concentration characteristics, discharge power-ozone yield characteristics, amount of gas flow-ozone concentration characteristics and amount of gas flow-ozone yield characteristics. PTOL-P appeared so as to be most excellent, and ozone generation characteristics were able to get the similar results at three kinds of remaining ozonizer ($PTO_{P-P}$, $PTO_{C-P}$, $PTO_{T-P}$).

• Microbiology and Biotechnology Letters
• /
• v.42 no.2
• /
• pp.114-120
• /
• 2014

This study evaluated the effect of the zeta potential of silica-alumina on the behavior, in terms of purity, yield, fractional precipitation time, precipitate shape, size of fractional precipitation in the increased surface area, and the fractional precipitation process, for the purification of paclitaxel. As the zeta potential value of silica-alumina increased, the yield of paclitaxel concurrently increased while the precipitation time decreased. The use of alumina with the highest value of the zeta potential (+35.41 mV) as a surface area-increasing material dramatically reduced the precipitation time by 12 h compared with the results of the control. On the other hand, the purity of paclitaxel had almost no effect on changes in the zeta potential of silica-alumina. In addition, the precipitate size was inversely correlated with the absolute value of the zeta potential.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.56-61
• /
• 2020

For the hydrogen liquefaction, the large amount of energy is consumed, due to precooling, liquefaction and o-p conversion processes. The aim of this work is to improve the performance of hydrogen liquefaction process by introducing the new energy saving processes, that are the liquid nitrogen precooling process by using LNG cold energy, and the new design of cold box insulation using cold air circulation. The results show that the indirect use of LNG cold energy in precooling process enables not only to get energy saving, but to make safer operation of liquefaction plant. In new cold box, the energy loss of equipments could be reduced by nearly 35%~50% compared to the present perlite insulation, if insulation structure is organised as 3mm steel wall/20cm PUF/5cm air/20cm PUF/equipment. Additionally the equipments installed in cold box can get cooling effect, if the temperature is higher than the temperature of cold air. The application of this results can gives to increase the liquid yield of about 50% substantially in industrial hydrogen liquefaction plant.

• Microbiology and Biotechnology Letters
• /
• v.49 no.2
• /
• pp.210-216
• /
• 2021

This study aimed to enhance ethanol productivity of Saccharomyces cerevisiae through genome editing using CRISPR/CAS9. To increase ethanol productivity, ACC1, ELO1, and OLE1 were overexpressed in S. cerevisiae using the CRISPR/CAS9 system. The strains overexpressing ACC1, ELO1, and OLE1 survived up to 24 h in YPD medium supplemented with 18% ethanol. Moreover, the ethanol yields in strains overexpressing ACC1 (428.18 mg ethanol/g glucose), ELO1 (416.15 mg ethanol/g glucose), and OLE1 (430.55 mg ethanol/g glucose) were higher than those in the control strains (400.26 mg ethanol/g glucose). In conclusion, the overexpression of these genes increased the viability of S. cerevisiae at high ethanol concentrations and the ethanol productivity without suppressing glucose consumption.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.129-135
• /
• 2019

4M D램 공동연구 개발사업(1986.10~89.03)은 당시 미 일의 강력한 기술보호주의를 극복하기 위한 자구책으로 시작되었다. 국내 반도체업계는 선진국의 높은 기술장벽 및 기술보호주의를 극복하고, 강력한 경쟁력확보 및 기술축적을 위해 정부에 건의하였다. 이에 정부는 적극적인 자금지원을 통해 4M D램 개발 및 주변기술 개발을 목표로 초고집적반도체기술공동개발사업을 수행하게 되었다. 본 공동R&D사업은 ETRI의 주관으로 당시 금성반도체, 삼성전자, 현대전자산업 등의 반도체 업체와 학계가 참여하였고, 1986년 10월부터 1989년 3월까지 3단계에 걸쳐 수행되었다. 공동연구의 목적은 설계, 공정, 조립, 검사 등 4M D램 제조와 관련되는 기본기술개발과 함께 $0.8{\mu}m$ 선폭의 4M D램을 개발하는 것이며, 이를 위해 단계별 목표를 설정하고 관민연의 혼연일치로 추진되었다. 1차년에는 중요 핵심기술개발, 2차년에는 $0.8{\mu}m$ 4M D램 Working-die개발, 3차년에는 수율 20%의 $0.8{\mu}m$ 4M D램 양산시 제품을 목표대로 완료하였다. 각 연구단계별로 주요 핵심기술에 대한 연구평가가 실시되었으며, 관련기술에 대한 중복투자 방지를 위해 2차년도부터 분담연구가 수행되었고, 상호 기술공유를 위한 기술교류회가 활발히 이루어졌다. 또한 R&D수행을 통해 4M D램 Working-die를 2차년도 중반에 개발완료하였으며, 3차년도에는 4M D램의 20% 수율확보와 공정기술의 최적화 및 DB 구축을 수행했다. 공동R&D 방식에서도 기업간 경쟁체제 도입에 입각하여 동기유발 형태로 진행되었다. 정부는 자금적 지원으로 기업간의 경쟁 심리를 자극하는 전략을 추진했다. 선두기업인 삼성에게는 선행적 개발 지위에 비례하여 더 많은 지원을 부여하는 대신에, 삼성의 기술성과를 다른 기업에게로 확산시킴으로써 반도체 3사 전체의 기술능력을 향상시키는 전략을 추진했다. 본 사업이 성공적으로 수행되어 반도체 제품의 세계시장 점유율제고, 국제수지 개선, 반도체 핵심기술 조기확보뿐만 아니라 16M D램급 이상 차세대 반도체기술 개발의 교도보가 되었다.

• Korean Chemical Engineering Research
• /
• v.59 no.1
• /
• pp.106-111
• /
• 2021

In this study, an ultrasound-assisted micellar extraction process was developed to efficiently purify the anticancer substance paclitaxel from the plant cell Taxus chinensis. The problem of many extraction steps and long phase separation time in the traditional micellar process could be dramatically improved. The highest paclitaxel yield (~96%, extracted twice) was obtained at 180 W of ultrasonic power and 1.5 h of ultrasonic irradiation time, which was 24.7% higher than that of the traditional method. In addition, the partition coefficient (K) showed a maximum value (24.0) at 180 W of ultrasonic power and 1.5 h of irradiation time. There was no significant difference in the purity of paclitaxel, and the purity of initial paclitaxel (6.81%) increased to 22.0% after purification. Compared to the traditional method, the phase separation time of the back extraction decreased by 40.7-56.2% (ultrasonic power 80 W), 46.3-67.6% (ultrasonic power 180 W), and 51.9-67.6% (ultrasonic power 250 W), respectively. The phase separation time decreased as the ultrasonic power (80-250 W) and irradiation time (0.5-2.5 h) increased.