• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.10
• /
• pp.901-909
• /
• 2012

This paper describes characteristics of solid-state $NaBH_4$ hydrogen generation and supply system for fuel cell UAV. Flow rate and pressure of the generated hydrogen were dramatically changed during $NaBH_4$ decomposition using acid. Hydrogen supply was stabilized by a self-pressurized reactor, and hydrogen stabilization method was introduced. For hydrogen generation in below zero-temperature, hydrochloric acid was diluted by propylene glycol-water mixtures. Solid-state $NaBH_4$hydrogen generation and supply system was designed. Basic operation experiments was performed to reveal the characteristics of this hydrogen generation system.

• 한국전기화학회:학술대회논문집
• /
• 2004.06a
• /
• pp.129-134
• /
• 2004

문헌 연구를 통해 최적의 수소저장물질의서 수소저장 효율, 물질의 안정성 및 경제성이 우수한 나트륨붕소수소화물($NaBH_4$, sodium borohydride)을 선정하여, 소형연료전지용 수소저장시스템에 대한 다양한 특성을 조사하였다. $NaBH_4$의 기초 물성 조사를 위해 수소 발생 능력, 용해도, 수소 비발생 등의 실험을 수행하였으며 다양한 촉매의 특성비교는 물론 수소저장시스템의 설계시 핵심적으로 고려할 수 있는 Key factor의 특성을 파악하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.13 no.1
• /
• pp.52-64
• /
• 2002

유기성 폐기물을 이용하여 생물학적 수소생산 통합화 시스템 연구를 수행하였다. 통합화 시스템은 유기성폐기물의 전처리, 2단계 혐기발효 및 광합성 배양으로 구성된 생물학적 수소생산 공정, 초임계수 가스화 공정, 생산된 가스의 저장, 분리 및 연료전지를 이용한 전력 생산으로 구성되었다. 실험에 사용된 유기성 폐자원은 식품공장 폐수, 과일폐기물, 하수슬러지이며, 전처리는 폐기물에 따라 열처리 및 물리적 처리를 하였으며, 전처리된 시료는 생물학적 수소생산 공정에 직접 적용되었다. Clostridium butyricum 및 메탄 생성조에서 발생하는 하수슬러지중의 미생물 복합체는 수소생산 혐기 발효공정에 사용되었으며, 광합성 수소생산 미생물인 홍색 비유황 세균은 광합성 배양에 사용되었다. 생물학적 공정에서 발생하는 미생물 슬러지는 초임계수 가스화 공정으로 수소를 발생하였으며, 슬러지 중의 COD를 저하시켰다. 생물학적 공정 및 초임계수 가스화 공정에서 발생하는 수소는 가스탱크에 가입상태로 저장한 후, 95%순도로 분리하였으며, 정제된 수소는 연료전지에 연결하여 전력 생산을 하였다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.16 no.2
• /
• pp.111-121
• /
• 2005

이 연구는 광화학적 물분해 수소제소 기술의 일환으로 수행 중인 광촉매와 바이오촉매를 복합한 시스템 활용 기술에서 광촉매가 갖는 물리적 특성의 영향을 파악하고자 진행되었다. 다양한 물리적 특성을 갖는 광촉매 얻기 위하여 상용광촉매, 수열화법(HT-TiON), 리고 저온합성법(LT-TiON) 등을 이용하여 샘플을 준비하였다. 가시광 감응을 위하여 암모니아나 triethylamine 처리를 하여 질소를 도핑도 시도하였다. 시도된 복합시스템은 인위적인 전자주개 없이 수소를 발생시키는 결과를 보여주었으나, 광촉매로부터 엔자임으로의 전자전달 부분이 율속단계로 확인되었다. 사용된 광촉매 샘플에 따라 수소발생량에 차이가 나타난 결과로 광촉매의 미세구조 (결정상, 결정도, 기공 크기 및 비표면적 등)이 중요한 역할을 하는 것으로 판단되었다. 얻어진 결과들을 활용하여 재료들이 고정화된 새로운 시스템 구성을 제안하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.226-232
• /
• 2013

A compact hydrogen generation device of fuel cell system using chemical hydride storage technique was designed to fit the propulsion device requirement of a small unmanned aerial vehicle(SUAV). For high efficient, compact, and lightweight hydrogen generation control device, the Co-B catalyst hydrogen conversion rate by $NaBH_4$ aqueous solution flux is measured so that the proper amount of Co-B catalyst for maximum hydrogen generation of 100W stack was proposed. A compact hydrogen generation device is controlled by pump's on/off using its own internal pressure and consumes fuel in high efficiency through a dead-end type fuel cell. The fuel cell system has stable operation for a planed flight profile. The system operates up to maximum 7 hours and at least 4 hours for tough flight profiles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.296-303
• /
• 2015

The concentration of solute in a $NaBH_4$ solution is limited due to the low solubility of $NaBO_2$. The performance of a hydrogen generation system was evaluated using various concentrations of $NaBH_4$ solution. First, a self-hydrolysis test and a hydrogen generation test for 30 min were performed. The composition of $NaBH_4$ solution was selected to be 1 wt% NaOH + 25 wt% $NaBH_4$+74wt% $H_2O$ by considering the amount of hydrogen loss, stability of hydrogen generation, $NaBO_2$ precipitation, conversion efficiency, and the purpose of its application. A hydrogen generation system for a 200 W fuel cell was evaluated for 3 h. Although hydrogen generation rate decreased with time due to $NaBO_2$ precipitation, hydrogen was produced for 3 h (conversion efficiency: 87.4%). The energy density of the 200 W fuel cell system was 263 Wh/kg. A small unmanned aerial vehicle with this fuel cell system can achieve 1.5 times longer flight time than one flying on batteries.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.558-559
• /
• 2008

본 논문은 미 일리노이 주립대 어바나-샴페인 캠퍼스에서 주로 군사용 응용 관련하여 개발 중인 마이크로 PEM 연료전지 시스템 개발에 대한 논문이다. 본 연구는 수소 저장 장치까지 포함하여 1 $mm^3$의 초소형 연료전지 시스템을 목표로 진행 중이며 본 논문은 이러한 진행 과정 중 화학적 하이드라이드 기반의 수소 발생기와 10 $mm^3$의 시스템 개발 과정에 대해 보고한다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.1
• /
• pp.41-48
• /
• 1999

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3-5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic and endothermic reaction. After releasing hydrogen from metal hydride with heatings by waste heat from industry we can transport this hydrogen to the rural area via pipe line. In the urban areas other metal hydride reacts with this hydrogen and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. So metal hydride can be used as a media for transportation, storage of heat. Some problems of the heat transportation using metal hydrides, and the example of heat transportation system were discussed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.233-239
• /
• 2013

A 100 W fuel cell system using chemical storage method has been applied for a propulsion system of the SUAV(Small Unmanned Aerial Vehicle). A fuel cell and battery have been combined for both the small/light hydrogen generation control system and the hybrid power supply system. A small hydrogen generation device was implemented to utilize NaBH4 aqueous solution and dead-end type PEMFC system, which were evaluated on the ground and by the flight tests. The system pressurized at a 45kpa stably operates and get higher fuel efficiency. The pressure inside of the hydrogen generation control system was maintained at between 45 kPa and 55 kPa. The 100W fuel cell system satisfies the required weight and power consumption rate as well as the propulsion system, and the fuel cell system performance was demonstrated through flight test.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.331-334
• /
• 2009

An air-independent propulsion (AIP) system based on fuel cell technologies was developed for space and underwater applications in the present study. Hydrogen peroxide was selected as an oxidizer for space and underwater power applications where air independence is a must. Catalytic decomposition of hydrogen peroxide was used to generate oxygen and water. The pure oxygen was provided to a fuel cell and the water was stored separately. Sodium borohydride in the solid state was used as a hydrogen source in the present study. Pure hydrogen can be generated by a catalytic hydrolysis reaction. A fuel cell system was fabricated to validate the fuel cell based air-independent power system and was evaluated at the various conditions.