• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.100-105
• /
• 1990

Small amounts of potassium were added to the titania - supported cobalt catalysts in order to produce higher and olefinic hydrocarbons in CO hydrogenation. Titania and potassium played important roles not only for the enhancement of the production of higher and olefinic hydrocarbons, but also for the prevention of the catalyst deactivation by carbon deposits. Titania support induced the so - called SMSI, and potassium seemed to act as an electronic modifier, giving rise to an electron enrichment of the metallic phase.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.381-387
• /
• 2017

Dehydrogenation from the hydrolysis of a sodium borohydride ($NaBH_4$) solution has been of interest owing to its high theoretical hydrogen storage capacity (10.8 wt.％) and potentially safe operation. An experimental study has been performed on the catalytic reaction rate and pressure drop of a $NaBH_4$ solution over both a single microchannel with a hydraulic diameter of $300{\mu}m$ and a staggered array of micro pin fins in the microchannel with hydraulic diameter of $50{\mu}m$. The catalytic reaction rates and pressure drops were obtained under Reynolds numbers from 1 to 60 and solution concentrations from 5 to 20 wt.％. Moreover, reacting flows were visualized using a high-speed camera with a macro zoom lens. As a result, both the amount of hydrogenation and pressure drop are 2.45 times and 1.5 times larger in a pin fin microchannel array than in a single microchannel, respectively.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.236-236
• /
• 2004

삼중수소수 오염처리의 선행공정으로 적합한 전기분해-촉매교환 결합공정(CECE process)은 수소동위원소 산화물의 수소화 전환을 위한 전해셀과 다단 액상촉매 교환탑으로 이루어진 탈삼중수소 공정이다(그림 1). 촉매탑은 수소 흐름에 수증기를 동반하도록 하는 친수층과 수증기-수소간의 수소동위원소 교환반응을 유도하는 촉매층으로 구분되며, 탑 상부에는 수소의 산화 반응기 그리고 하부에는 물의 수소화 전해셀로 구성되어 있다(그림 2).(중략)

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.412-415
• /
• 2013

Palladium on carbon powder was prepared using 1-hexyl-3-methylimidazolium tetrafluoroborate, one of room temperature ionic liquids. The synthesized particles were tested as a hexafluoropropylene hydrogenation catalyst. Moreover, the hydrogenation was performed under various reaction conditions to develop an optimum reaction process. The catalyst prepared by more than 3 wt% of palladium and the unity mole ratio of ionic liquid to palladium precursor showed higher catalytic activity. For reaction conditions, the complete hexafluoropropylene (HFP) conversion was achieved at these conditions; the volume flow ratio of hydrogen to HFP was higher than 1.25 and $GHSV_{HFP}$ was lower than 50000 mL/g-h.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.829-831
• /
• 2009

폐기물, 석탄 등 다양한 시료의 가스화 반응을 통해서 발생되는 합성가스는 CO, $H_2$, $CO_2$가 주성분으로 가스엔진, 가스터빈 등의 연료로 사용하여 발전하거나 합성반응을 통해 다양한 화학원료로의 전환이 가능하다. 또한 폐기물, 석탄 등의 다양한 원료의 가스화 반응에 의해 발생한 합성가스로부터 F-T(Fischer-Tropsch) 합성을 통한 인조합성석유, Non F-T 합성을 통한 메탄올, DME(Dimethyl Ether) 등을 제조할 수 있으며, 메탄화 반응을 통해 대체천연가스(SNG, Substitute Natural Gas)로 제조하여 활용하는 방안도 가능하다. 또한 현재 상업용 규모의 수소 제조 방법 중에서 가장 경제적인 방법으로 천연가스를 개질하여 CO, $H_2$가 주성분인 합성가스를 만든 다음 수성가스 전환, PSA(Pressure Swing Adsorption)통해 $CO_2$와 $H_2$를 분리하여 생산하고 있으나, 천연가스 가격의 상승 및 다양한 시료로부터 향후 경제성 확보가 가능한 수소 제조 방법에 대한 연구가 진행되고 있으며, 석탄 가스화 및 폐기물 가스화를 통해 얻어진 합성가스로부터의 수소 제조 공정이 개발 및 상업화 추진되고 있다. 본 연구에서는 폐기물 가스화를 통해 발생한 합성가스에 대하여 수성가스 전환 반응을 통한 수소 생산 특성 및 수성가스 전환 반응의 공간속도 변화 및 스팀주입량 변화에 따른 반응 특성을 고찰하였다.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.5
• /
• pp.528-532
• /
• 2007

The generation of high-purity hydrogen from hydrocarbon fuels is essential for efficient operation of fuel cell. In general, most feasible strategies to generate hydrogen from hydrocarbon fuels consist of a reforming step to generate a mixture of $H_2$, CO, $CO_2$ and $H_2O$(steam) followed by water gas shift(WGS) and CO clean-up steps. The WGS reaction that shifts CO to $CO_2$ and simultaneously produces another mole of $H_2$ was carried out in a two-stage catalytic conversion process involving a high temperature shift(HTS) and a low temperature shift(LTS). In the WGS operation, gas emerges from the reformer is taken through a high temperature shift catalyst to reduce the CO concentration to about $3\sim4%$ followed to about 0.5% via a low temperature shift catalyst. The WGS reactor was designed and tested in this study to produce hydrogen-rich gas with CO to less than 0.5%.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.390-395
• /
• 1997

국내 원전연료 생산시설에서 발생되는 페지르칼로이를 이용하여 수소의 흡수ㆍ저장 가능성을 확인하였으며 $600^{\circ}C$에서 수소원자대 금속원자의 비율이 약 2.0으로 되는 것을 측정하였다. 지르칼로이의 수소화반응을 위해서는 100$0^{\circ}C$ 이상에서, 금속의 활성화 과정에 의한 금속 표면의 oxide film의 제거가 필요한 것으로 나타났으며 수소화반응은 15분 이내에 이루어지는 것으로 관찰되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.802-805
• /
• 2009

생활폐기물을 플라즈마 가스화하고 얻어지는 합성가스로부터 수소를 생산하는 파일럿플랜트 건설 계획을 소개한다. 이 파일럿플랜트는 현재 가동 중인 청송군의 10톤/일급 플라즈마 가스화 시설을 고농도 합성가스를 생산하는 시설로 변경하고 수소전환반응기와 수소 PSA 장치를 부착하여 99.999% 순도의 수소 $200Nm^3/h$을 생산하여 연료전지 발전하는 것으로 계획되어 있다. 이 파일럿플랜트는 $20Nm^3/h$ 급의 폐기물 플라즈마 가스화 - 고순도 수소 생산 기술개발 완료에 이은 상용화 실증 시설이다.

• Transactions of the Korean hydrogen and new energy society
• /
• v.7 no.2
• /
• pp.147-155
• /
• 1996

The aim of this study is the development of technologies of methanol production from carbon dioxide by catalytic hydrogenation. Experiments about carbon dioxide hydrogenation by catalyst mixed with CuO, ZnO, $Cr_2O_3$ and $Al_2O_3$ were conducted to find optimum catalyst and reaction condition. Reactions were carried out at atmospheric and high pressures between 200 to $350^{\circ}C$. High yield of methanol was obtained with $Cu/ZnO/Cr_2O/Cr_2O_3/Al_2O_3$ catalyst at $250^{\circ}C$ and above 30 atmospheric pressure. There was not any increament of hydrogenation reactivity for the catalysts which was made by the addition of Pd to $Cu/ZnO/Cr_2O/Cr_2O_3/Al_2O_3$.

• Resources Recycling
• /
• v.13 no.3
• /
• pp.27-36
• /
• 2004

Nickel oxide was recovered through roasting of a spent catalyst for hydrogenation reaction. Nickel on Kieselguhr catalysts were prepared by a precipitation method after a treatment of the recovered-nickel oxide with an acid. Effects of roasting temperature of the spent catalyst on recovery of nickel oxide was investigated. Most of nickel oxide could be recovered through roasting of the spent catalyst at $1000^{\circ}C$. In regeneration of catalysts by the precipitation method after the treatment of nickel oxide with an acid, the effect of promoter, precipitation condition and reduction condition on catalytic performance in vegetable oil hydrogenation were investigated. The addition of CaO or $Ce_2$$O_3$ resulted in an increase of catalytic activity.