• Economic and Environmental Geology
• /
• v.36 no.5
• /
• pp.381-385
• /
• 2003

We investigated possible application of waste ferrite in treating Cd and Pb in wastewater. Adsorption of Cd and Pb on Mn-Ferrite are influenced by several controlling factors such as contact time, heavy metal concentrations, pH and temperature. Both Cd and Pb achieved adsorption equilibrium within 5 minutes. Based upon this kinetic data, 24 hours of contact time was allowed for other experiment. The adsorption of Cd and Pb was high at high pH and high ion concentrations. The reaction was also affected by temperature. Adsorption isotherms fits well with the Freundlich isotherm equation. pH is the main controlling factor in Cd, Pb adsorption on the Mn-ferrite. Cd showed S type adsorption curve while Pb showed sorption edges, depending on the Pb concentrations.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.3
• /
• pp.203-218
• /
• 2011

Long-term trends and distribution patterns of water quality were investigated in the Yeoja Bay of South Sea, Korea from 1976 to 2010. Water samples were collected at 3 stations and physicochemical parameters were analyzed including water temperature, salinity, hydrogen ion concentration (pH), dissolved oxygen (DO), chemical oxygen demand (COD), suspended solids (SS) and nutrients. Spatial distribution patterns of temperature, pH and DO were not clear among stations but the seasonal variations were distinct except ammonium. The trend analysis by principal component analysis (PCA) during 31 years revealed the significant variations in water quality in the study area. Spatial water qualities were discriminated into 2 clusters by PCA; station cluster 1 and 2~3. Annual water qualities were clearly discriminated into 4 clusters by PCA. By this multi-variate analysis, the annual trends were summarized as the followings; water temperature, COD and SS tended to increase from late 1970's, decreased salinity, and increased phosphate from 1991 to 2001 and increased dissolved inorganic nitrogen. Water quality was showed by the input of fresh water same as those of Kyoungin coastal area, Asan coastal area, Choensoo bay, Gunsan coastal and Mokpo coastal area in the Yeoja Bay.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.164-167
• /
• 2001

본 연구에서는 포항제철소에서 제철부산물로 발생되는 제강분진을 전처리 없이 산화촉매로 사용하여 김포 수도권 매립지의 침출수 처리공정에서 펜톤산화조에 유입되는 원수를 대상으 로 과산화수소를 이용한 연속식 산화처리 실험을 수행하였다. 먼저 회분식 실험결과를 바탕 으로 최적 반응조건에서 lab-scale 연속식 기초반응실험과 자체 설계.제작한 연속산화공정에서의 처리실험을 수행하였다. 또한 기존의 펜톤산화공정에서 Fe 공급원으로 사용되고 있는 FeSO$_4$.7($H_2O$)와의 반응성 비교실험도 수행하였다. 반응기간동안 일정 pH를 유지하기 위해 pH controller를 사용하였으며 침출수 수질은 CODcr로 나타내었다. 반응 pH 3.5, 체류시간 1 hr, 과산화수소 주입량 1,500mg/1에서 제강분진과 FeSO$_4$.7($H_2O$)를 각각 주입하여 수행한 연속처리 기초실험에서는 제강분진을 산화반응촉매로 사용한 경우에 침출수CODcr 처리율 62%, 과산화수소의 분해율 52%를 나타내었다. FeSO$_4$.7($H_2O$)를 산화반응 촉매로 사용한 경우에는 약 65-70%정도의 다소 높은 처리효율을 나타낸 반면에 과산화수소의 소비량은 제강분진의 경우보다 약 20%이상의 높은 값을 나타내었다. 연속산화공정 실험에서는 운전 3시간 이후에 유출수 중의 CODcr과 $H_2O$$_2$의 농도가 안정된 값을 나타내었다. 이 때 산화 반응조의 침출수 CODcr 제거효율은 약 43%이었으며, 처리수의 농도는 현재의 침출수 방류기준 이하로 나타났다. 결론적으로 침출수의 연속식 산화처리 실험결과, 처리효율과 경제성에서 제강분진의 산화촉매활용 공정의 개발 가능성이 매우 높은 것으로 나타났다.ell에 의해 완전분해 되었으며, 함께 존재시 TC는 Fe$^{\circ}$만으로는 분해가 되지 않았지만 cell에 의해 완전분해 되었으며, 함께 존재시 TCE분해에 저해작용을 미치는 것으로 나타났다.술의 첨가가 요구되고 있다. 따라서, 산성광산배수 오염지대에 대해 획일적으로 같은 처리방법을 채택하여 사용하는 것보다 각 지역 또는 광산산성폐수가 유출되어 나오는 광산폐기물의 특성 등을 고려하여 거기에 맞는 기술들을 복합적으로 또는 단독으로 사용하되 처리방법 채택 시 신중을 기할 것이 요망된다.정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물

• Membrane Journal
• /
• v.18 no.4
• /
• pp.261-267
• /
• 2008

A graft copolymer consisting of poly(vinyl chloride) (PVC) backbone and poly(hydroxyethyl acrylate) (PHEA) side chains was synthesized via atom transfer radical polymerization (ATRP). Direct initiation of the secondary chlorines of PVC facilitates grafting of hydrophilic PHEA monomer. This graft copolymer, i.e. PVC-g-PHEA was cross-linked with sulfosuccinic acid (SA) via the esterification reaction between -OH of the graft copolymer and -COOH of SA, as confirmed by FT-IR spectroscopy. Ion exchange capacity (IEC) continuously increased to 0.87meq/g with increasing concentrations of SA, due to the increasing portion of charged groups in the membrane. However, the water uptake increased up to 20.0wt% of SA concentration above which it decreased monotonically. The membrane also exhibited a maximum proton conductivity of 0.025 S/cm at 20.0 wt% of SA concentration, which is presumably due to competitive effect between the increase of ionic sites and the crosslinking reaction.

• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.125-129
• /
• 1999

Portable-type two electrode system for the determination of highly concentrated hydrogen peroxide (10-75%) has been studied. The electrode body was made with teflon rod (length=10 cm, diameter=1.5 cm) to withstand the highly corrosive power of hydrogen peroxide. Glass carbon rod (diameter=3 mm) was used as the working electrode and a carbon cylinder (i.d.=5 mm; o.d.=9 mm) was used as counter electrode. The applied voltage for the determination of $H_2O_2$ was 0.8 V. Diluting the highly concentrated samples taken from the industrial batch to 10% or less, it was possible to make quantitative determinations, while eliminating the interference from the stabilizer contained in the sample and preventing the surface of the electrode from oxidative corrosion. Employing hydrogen peroxide permeable membrane (teflon membrane${\leq}100{\mu}m$) for the electrode system, it was possible to measure the content of $H_2O_2$ in highly concentrated samples directly, quantitatively and reproducibly with no extra dilution step. However, it was necessary to change the internal electrolyte frequently to maintain the analytical performance of the electrode.

• Analytical Science and Technology
• /
• v.5 no.4
• /
• pp.401-408
• /
• 1992

The ion-selectrodes based on calcium ferrite were prepared by mixing calcium oxide with ferric oxide on molar ratio of 0.6:1.4, 0.8:1.2, 1.0:1.0, respectively. The specimens were sintered at $1400^{\circ}C$ for 2hrs in $O_2$ and for 20min in $H_2$ atmosphere. The selectrode sintered in hydrogen atmosphere showed better responded potential and wider range of responded concentration than selectrode sintered in oxygen atmosphere. The ion-selectrodes base on calcium ferrite(0.6:1.4 molar ratio.) showed the highest potential to bivalent cations such as $Ca^{2+}$, $Ba^{2+}$, $Mg^{2+}$, $Zn^{2+}$ and halogen anions such as $I^-$, $Br^-$ in the range of $10^{-1}{\sim}10^{-7}M$. It showed good agreement with theoretical nernstian values.

• The Korean Journal of Zoology
• /
• v.32 no.1
• /
• pp.34-39
• /
• 1989

Ouabain, strychnine sulfate, caffeine sodium benzoate and chlorpromazine hydrochloride were introduced intraperitoneally into male mice for 7, 14 and 21 days to induce the changes in the relative percentages of lactate dehydrogenase isozymes. The five isozymes in brain, heart and kidney tissues were electrophoresed on cellulose acetate strip and subjected to densitometry. Ouabain caused a drastic increase of B$_4$isozymes only in brain tissues. The two stimulants altered the relative percentages of $A_4$and B$_4$isozymes conspicuously in brain tissues, whereas virtually no redistributions of five isozymes were occurred by the depressant except B$_4$isozymes in brain and heart tissues. On the basis of these observations, it might be suggested that the changes in intracellular concentration of sodium and calcium ions are not the cause of the isozyme redistributions and that Organization of plasma membrane could be one of the factors involved in the tissue specificity of lactate dehydrogenase isozymes in vertebrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.374-374
• /
• 2011

Cu(In,Ga)Se2 (CIGS) 박막 태양전지는 일반적으로 Soda lime glass/Mo/CIGS/CdS/ZnO/ITO/Al의 구조로 제작된다. 태양전지는 p형과 n형 반도체의 접합에 의해서 동작을 하게 되며, CIGS 박막 태양전지에서는 p형으로 CIGS 박막과 n형으로 CdS 박막이 사용된다. CIGS 박막태양전지에서는 p형과 n형이 서로 다른 물질로 이루어진 이종접합을 이루게 되고, 계면에서의 밴드가 어떻게 형성이 되느냐에 따라 태양전지 성능에 영향을 미치게 된다. p형의 CIGS 박막은 주로 다단계 증발법에 의해 형성되고 3단계 공정조건에 의해 계면의 특성에 많은 영향을 미치게 된다. n형의 CdS 박막은 주로 chemical bath deposition (CBD) 법에 의해 제작된다. 이렇게 제작되는 CBD-CdS는 시약의 농도, pH (수소이온농도), 박막 형성시의 온도 등의 조건에 따라 특성이 변하게 된다. 본 논문에서는 3단계 공정시간을 변화시켜 제작된 CIGS 박막 위에 CBD-CdS 증착 조건 중 thiourea 의 농도를 변화시켜 CIGS 태양전지를 제작하고 그에 따른 특성을 살펴보았다. CIGS 박막은 3단계 공정시간을 490초와 360초로 하여 제작하였고, CdS 박막은 thiourea 농도를 각각 0.025 M과 0.05 M, 0.074 M, 0.1 M로 변화시켜가며 제작하였다. 제작된 CIGS 박막 태양전지는 CIGS 3단계 공정시간과 thiourea의 조건에 따라 최고 15.81%, 최저 14.13%로 나타내었다. 또한, 외부양자효율을 측정하여 제작된 CIGS 박막 태양전지의 파장에 따른 특성을 비교하였다.

• 한국해양학회지
• /
• v.28 no.3
• /
• pp.229-240
• /
• 1993

This study investigated the behaviour of sulfur species after the early diegenetic reduction of sulfate from pore solution in an anoxic intertidal flat deposit in the Banweol area of Kyeong-gi Bay, west coast of Korea. A total of seven sediment cores were collected during 1990∼1992 and were analyzed for their solid-phase sulfur species (acid-volatile sulfur, element sulfur, pyrite sulfur) as well as for chemical components in the pore solution, such as sulfate, ammonium, hydrogen sulfide, phosphate and Fe ion. The pore water sulfate oncentration was found to decrease rapidly downward from the sediment surface, while that of hydrogen sulfide, ammonium and phosphate showed and increase. The dissolved iron concentration in pore water, on the other hand, was found high in the surface layer of sediment, but fell sharply below this layer. these characteristic profiles of pore water sulfide and iron concentrations suggest that some reaction occurs between dissolved iron and sulfide ions, leading to the formation of various sulfide minerals in the sedimentary phase. The amount of inorganic sulfur species in the sediment increased downward, and showed a maximum of up to 7.9 mg/g. among the three species analyzed, acid-volatile sulfur (AVS) was dominant comprising more than 50% of the total. The amount of pyrite sulfur was greater than that of element sulfur. This implies that the formation of pyrite was restricted in this environment. the limited amount of element sulfur in this deposit may have discouraged the active formation of pyrite.

• Applied Chemistry for Engineering
• /
• v.16 no.1
• /
• pp.107-111
• /
• 2005

We have performed a study on the electrochemical characteristics and nuclear ($^7Li$) magnetic resonance of $V_2O_5$ xerogels that have been synthesized by the sol-gel reaction of $V_2O_5$ powder with hydrogen peroxide. NMR measurements revealed that chemical shift of $Li^+$ ions varied as lithium ions were inserted into $V_2O_5$ xerogel and that several different sites for $Li^+$ ions existed in the $V_2O_5$ xerogel structure. The electrochemical properties of the xerogel electrodes did not depend much upon the concentration of $V_2O_5$ and HCl that were used for the synthesis of $V_2O_5$ gels. The specific capacity of $V_2O_5$ xerogels were about 140 mAh/g, similar to that of the xerogels prepared by the ion exchange method.