• Resources Recycling
• /
• v.17 no.5
• /
• pp.44-51
• /
• 2008

The removal of minor elements such as Na, Ca and Fe has been performed from domestic aluminum hydroxide of 99.7% purity with organic acids. Oxalic and citric acid were used as the leaching agent, respectively and aluminum hydroxides of different particle size were also employed for the purification with organic acid leaching. Fine grinding of aluminum hydroxide has been tested using ball mills and leaching characteristics of each element have also been examined in terms of leaching parameters such as temperature, acid concentration, and solid density. As a result, it was found that oxalic acid showed higher leaching efficiency than citric acid in the concentration range of 0.1 to 1.0 mole/l and leaching amount of each element was also increased with the acid concentration and reaction temperature. It was observed that about 45% of Na was leached out during ball milling process which implied that the majority of Na contained in aluminum hydroxide was water soluble compound.

• Resources Recycling
• /
• v.14 no.4 s.66
• /
• pp.41-46
• /
• 2005

Waste aluminum dross is a major waste in the aluminum scrap smelters and its major components are alumina and metallic aluminum. In this study, waste aluminum dross was leached with sodium hydroxide solution to extract the remained aluminum into the solution, and aluminum hydroxide was recovered from the leached solution. The dross residue generated at the leaching step was recycled into alumina base ceramic materials through a series of treatments such as washing, drying and roasting. Also, a pilot plant was constructed and tested to demonstrate the developed technology. Four tons of waste aluminum dross could be processed per day. From the test run of the pilot plant, it was confirmed that the developed technology could be applied to commercialization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.44-48
• /
• 2003

할로겐 난연재료 및 고분자의 연소시 Dioxine의 문제점이 대두되고 있어 유럽국가를 중심으로 할로겐 난연제 사용을 규제하고 있다. 환경과 인체에 대한 안정성을 고려해서 저 유해 가스화, 저 발연화, 저 부식성, 리사이클링 등을 겸비한 제품의 개발로 관심이 모아지고 있는 실정이다. 본 연구에서는 환경친화적인 금속화합(수산화 알루미늄)을 사용하여 연소시 발생할 수 있는 난연성, 무독성, 소연성 등을 함량별로 확인하고 난연재가 증가할수록 취약한 기계적 물성 보완을 위해 moisture cure crosslikable 기술로 케이블절연 및 자켓 피복층 특성을 증가 시켰다. 그러나 수산화알루미늄 함량이 증가할수록 기계적 물성과 기타 특성도 감소하는 경향을 보이고 있어 최적의 난연제 조성함량이 약 130~150 phr정도에서 우수한 결과를 확인하였다. 또한 moisture cure agent는 전선압출 시 표면에 scorch 및 장기 압출에 영향을 주므로 약 1.5~2phr 범위에서 처방하는 것이 우수하다. 원료투입 후 mixing 공정 중에서는 온도관리가 매우 중요하므로 되도록 믹싱 온도를 $130^{\circ}C$ 이하를 유지해야한다. 온도는 수산화알루미늄의 분산성과 케이블 피복압출 시 표면에도 영향을 주기 때문이다 본 연구는 이런 작업방법을 통해 친환경 가교 난연콤파운드가 비(比) 가교된 제품에 비해 특성이 증가되는 것을 입증할 수 있었다.

• Ceramist
• /
• v.12 no.2
• /
• pp.20-26
• /
• 2009

• Journal of the Korean Ceramic Society
• /
• v.38 no.9
• /
• pp.822-828
• /
• 2001

Bayer process is based on the extraction of aluminium trihydroxide from bauxite. The process is operated with the several criteria such as primary crystal size, particle size distribution and yield etc.. In this study basing on the previous results, an investigation on the effect of chemical grade and smelting grade aluminium trihydroxide precipitation condition were undertaken. As a result, particle size was 42∼44${\mu}$m form chemical grade product and 74∼77${\mu}$m for smelting grade product. The yield and solubility by acid of chemical grade product was higher than smelting grade product. The attrition index of smelting grade product was lower than that of other commercial product because primary crystal size of the smelting grade product was small.

• Journal of Navigation and Port Research
• /
• v.30 no.8 s.114
• /
• pp.637-642
• /
• 2006

In this paper, we made an experiment on materials of two kinds. First, we made a study of Multi-layer EM wave absorbers using Sendust. In result, The bandwidth of the Multi-layer Sendust EM wave absorbers over 10 dB is extended in S-Band. Second, we investigated the mixing effects of AI(OH)3 on Multi-layer Sendust EM wave Absorbers. In result, the Multi-layer Sendust EM wave absorbers mixed with Al(OH)3 showed a extended bandwidth over 10 dB compared with non-mixed Multi-layer Sendust EM wave absorbers in S-Band.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.97-101
• /
• 2006

In this paper, Multi-layer EM wave absorbers using Sendust are presented. The bandwidth of the Multi-layer Sendust EM wave absorbers over 10 dB is extended in S-Band And we investigated the mixing effects of $Al(OH)_3$ on Multi-layer Sendust EM wave Absorbers. As a result, the Multi-layer Sendust EM wave absorbers mixed with $Al(OH)_3$ showed a extended bandwidth over 10 dB compared with non-mixed Multi-layer Sendust EM wave absorbers in S-Band.

• Korean Journal of Soil Science and Fertilizer
• /
• v.17 no.2
• /
• pp.147-154
• /
• 1984

Two Fe-hydrous oxide A,B and one Al-hydroxide minerals were synthesized precipitating Fe $Cl_3$ and $AlCl_3$ with alkali solution(NaOH) at pH 6.0, 12.0 and 4.5 respectively, for precise understanding of physico-chemical and surface charge characteristics of soils in which these minerals are dominant. Identification of these final products, effect of free and amorphous materials on X-ray diffraction analysis, particle size distribution and surface change characterics of these minerals were performed. Fe-hydroxide A and B were identified as great deal of X-ray amorphous material and as goethite with large amount of X-ray amorphous material, respectively. Dehydration by oven at $105^{\circ}C$ of these minerals exhibited akaganeite peaks with low X-ray amorphous hump and pure goethite peaks for Fe-hydroxide A and B, respectively. Both minerals, however, turned into hematite upon firing at $550^{\circ}C$. On the other hand, Al-hydroxide identified as mixture of gibbsite and bayerite of around 7:3 ratio. Application of sodium dithionite and ammonium oxalate solutions for removal of free or amorphous Fe and Al from these minerals revealed that only peak intensities of Al-hydroxide system were enhanced upon Al-extraction by oxalate solution even though dithionite solution was much powerful to extract Fe from Fe-hydrous oxide systems. Original(wet) Fe-hydrous oxide A has the highest specific surface and surface charge development(negative and positive), and the greatest amount of less than $2{\mu}m$ sized particles. Specific surface and clay sized particles(less than $2{\mu}m$) of Fe-hydrous oxide A, however, were drastically reduced upon dehydration($P_2O_5$ and oven drying) compare to the rest minerals. The Z.P.C. of these synthetic minerals were 8.0-8.5, 7.5-8.0 and 5.5-6.0 for Fe-hydrous oxide A, B and Al-hydroxide, respectively.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.227-234
• /
• 2003

Silicone composites for high voltage insulator (HVI SC) were prepared by adding aluminum trihydrate(ATH) treated by surface treatment agent to base silicone compound at the ratio oi 100:20, 100:40, 100:60, 100:80, and 100:100, respectively And also, ATH was treated by various surface treatment agents, such as stearic arid, acryl silane, and vinyl silane under compounding process. Mechanical properties and electrical properties were investigated for the various contents of ATH and surface-treatment agents. Mechanical properties such as tensile strength, elongation, and tear strength decreased as the load of ATH increased. Volume resistivity, AC break down strength, and tracking resistance for HVI SC containing ATH treated by vinyl silane were better than those for HVI SC containing ATH treated by other surface treatment agents, such as stearic acid and acryl silane. Polymer-filler interaction of silicone composites according to surface treatment agents was studied by measuring bound rubber contend(BR). From the experimental results, BR of silicone composite containing ATH treated with vinyl silane was higher than that of the others. The degree of rule for silicone composite was investigated using Rheometer. Maximum torque of silicone composites contaning ATH treated with vinyl silane was higher than that of silicone composite contaning ATH treated with other surface agents.

• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.422-426
• /
• 1991

In order to synthesize high-purity alpha alumina fine powder, the aluminum hydroxide and ammonium aluminum sulfate(alum) precursor were prepared from natural alumino-silicate(halloysite). The thermal decomposition mechenism for both precursors was elucidated by DTA/TG, XRD and IR analysis. The microstructure, specific surface area and purity of ${\alpha}-Al_2O_3$ were characterized by SEM, and BET analysis. The particle size of ${\alpha}-Al_2O_3$ was determined to be ${\phi}$ = 0.1∼0.5 ${\mu}$m. However, the specific surface area for the alum derived ${\alpha}-Al_2O_3$(89.0 m$^2$/g) was extremely higher than that for the aluminum hydroxide derived one(7.3 m$^2$/g).