• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.57.1-57.1
• /
• 2010

레이저 색소 분자간의 회합을 막음으로써 높은 레이저 효율을 갖는 고체 색소 레이저를 제조하기 위해 레이저 색소인 DCM을 유-무기 하이브리드 재료에 화학적으로 결합시켰다. 수산화기를 기능기로 갖는 DCM을 합성하여 이를 솔-젤반응의 전구체로 활용하였다. 유기실란을 DCM과 함께 솔-젤반응을 시킴으로써 DCM이 결합된 유무기 하이브리드 재료를 제조하였다. DCM이 결합된 유-무기 하이브리드 재료는 유기물과 무기물의 특성을 각각 갖고 있기 때문에 용액공정을 통해 고체 색소 레이저를 단시간에 제작할 수가 있을 뿐만 아니라 열적 및 광학적으로 우수한 특성을 보여주었다. Nd:YAG 레이저를 여기광으로 이용하여 DCM이 결합된 유-무기 하이브리드 재료의 레이저 효율을 측정하여 DCM을 유기용매에 녹인 색소 레이저의 레이저 효율과 비교하였다. DCM이 결합된 유-무기 하이브리드 재료는 DCM의 농도가 높아질 수록 유기용매를 이용한 색소 레이저에 비해서 더 높은 레이저 효율을 가지는 것을 관찰하였다. 이는 DCM이 결합된 유-무기 하이브리드 재료에 각각의 DCM 분자가 실록산 망목구조와 화학적으로 결합이 되어있기 때문에 하이브리드 재료에 안정적으로 존재할 수 있게 되고 망목구조에 둘러쌓여 분자간의 회합이 방지되는 효과를 가지게 되기 때문이다.

• Polymer(Korea)
• /
• v.26 no.1
• /
• pp.80-87
• /
• 2002

A comparative study using electron-beam(EB) and thermal curing techniques was carried out to determine the effect of cure behavior and thermal stability of epoxy resins. In this work, benzylquinoxalinium hexafluoroantimonate(BQH) was used as a latent cationic catalyst for an epoxy resin. According to the thermogravimetric analysis(TGA), the decomposed activation energy based on Coats-Redfern method was higher in the case of thermal curing technique. This could be interpreted in terms of slow thermal diffusion rate resulted from high crosslink density of the thermally cured epoxy resin. However, the increase of hydroxyl group in the epoxy resin cured by EB technique was observed in near-infrared spectroscopy(NIRS) measurements, resulting in improving the stable short aromatic chain structure, integral procedural decomposition temperature, and finally ductile properties for high impact strengths.

• Polymer(Korea)
• /
• v.37 no.2
• /
• pp.232-239
• /
• 2013

A series of novel imidazole-blocked diisocyanate bioadhesives (IBAs) were synthesized from reaction of toluene 2, 4-diisocyanate (TDI), isophorone diisocyanate (IPDI), hydroxyl-terminated polylactide (HO-PLA-OH), 1,1,1-trimethylolpropane (TMP), and imidazole. Synthesis of IBAs was confirmed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC). Differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA) revealed that the TDI-based IBA had lower thermal dissociation temperature and a faster deblocking rate than IBA based on IPDI. Hydroxyl-terminated polyurethane (HPU) was introduced to study the adhesive effect of the synthesized IBAs. Improvement on elastic modulus, tensile strength and water resistance of IBA-modified HPU in comparison with neat HPU suggested the good adhesive effect of IBA due to the strong chemical reaction between released NCO groups from IBA and hydroxyl groups from HPU.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.227-235
• /
• 1996

poly(acrylic acid)(PAA)-poly(vinyl alcohol)(PVA) membranes have been prepared by crosslinking reaction between the carboxylic acid groups of PAA and the hydroxylic groups of PVA. In the measurements of the swelling and preferential sorption of the membranes, sorption behaviors of the membranes in pure water, pure acetic acid and a mixture of them have been investigated, respectively. From the measurements of the preferential sorption in 90wt% acetic acid of aqueous mixture, the sorption of water component was found to be more enhanced at high PAA content in the membrane than that of acetic acid component due to the interaction of water with acetic acid. The sorption behavior and the degree of crosslinking influenced competitively the permeation behavior of permeants. Permeation behavior of perrecants through the membranes was analyzed by using permeation activation energies which had been obtained from the Arrhenius plots of fluxes.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.589-595
• /
• 2003

Unsaturated polyester (UP) nanocomposite with montmorillonite (MMT) which contains different types of organic modifiers far nano-filler have been prepared to investigate the effect of chemical structure of organic modifiers and mixing time of all components on properties of products. It was found that the morphology and various physical properties of UP/MMT nanocomposites were influenced by properties of organic modifiers of MMTs. It was also confirmed that the content of MMT does not significantly affect properties of UP/MMT nanocomposites.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.3 no.1
• /
• pp.19-26
• /
• 1970

During the summer of 1969, a series of experiments on the spawning and development of the eggs of grass carp and silver carp was performed with the following results, but the complete development of eggs Iras not accomplished: 1. The season of maturity for both species is estimated to be from the end of June to the beginning of August. 2. Pituitary glands for the use of inducing maturation should be obtained before the maturation season of its donor. 3. Silver carp as small as 40 cm in body length (48 cm in total length) with an age of 6 years were found to have reached maturity, and the number of eggs in the ovaries were from about 23 to 26 thousand for those with body lengths of 40-44.5 cm. 4. The conical-shaped net cloth incubator worked better than others, and each incubator was most effective when installed in parallel series to the water supply pipe with a valve for each incubator to control water flow. 5. During the egg development, if any cell or cells were displaced, the eggs eventually died. 6. The proper manipulation of brood fish before the egg-taking seems to be very Important, and close care should be paid to feeding them well and keeping them in a pond of proper water depth.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.4
• /
• pp.83-88
• /
• 2010

The composite electroplating is accomplished by adding inert materials during the electroplating. Permalloy is the term for Ni-Fe alloy and it is used for industrial applications due to its high magnetic permeability. Microhardness for microdevices is enhanced after composite coating and it increases the life cycle. However, the hydroxyl group on the silica makes their surface susceptible to moisture and it causes the silica nanoparticles to be agglomerated in the aqueous solution. The agglomeration problem causes poor dispersion which eventually interrupts uniform deposition of silica nanoparticles. In this study, the dispersion of silica nanoparticles in the permalloy electroplated layer is reported with variation of additives and sonication time. Longer sonication period guaranteed better silica nanopowder dispersion and sonication period also influenced on composition of deposits. The amount of silica nanopowder codeposition and surface morphologies were influenced with variation of additives. In alkaline bath, smooth surface morphology and relatively high contents of silica nanopowder codeposition were obtained with addition of sodium lauryl sulfate.

• Journal of Life Science
• /
• v.23 no.6
• /
• pp.838-846
• /
• 2013

As a forth state of material, plasma is ionized gas, which generates characteristically various reactive species. After late of $20^{th}$ century, plasma has been widely used in industry. After nonthermal atmospheric plasma was developed, it has been applied to biomedical fields. Nonthermal atmospheric plasma does not give thermal damages to human tissues, and it shows the high efficiency in cancer treatment, sterilization, tooth bleaching, coagulation, and wound healing. Because the application of plasma to biomedicine has been expanded through interdisciplinary studies, its value of high medical technology is increasing now. Since nonthermal atmospheric plasma was first applied to the mammalian cells and microorganisms, many valuable studies has been performed for about last 10 years, so that now the new research area called 'plasma medicine' has been formed. This article introduces the recent data resulted from plasma medicine and helps to understand the plasma medicine.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.457-462
• /
• 2010

Adsorption of a water molecule on a Si (001) surface and its dissociation were studied using density functional theory to study the distribution of -OH fragments on the Si surface. The Si (001) surface was composed of Si dimers, which buckle in a zigzag pattern below the order-disorder transition temperature to reduce the surface energy. When a water molecule approached the Si surface, the O atom of the water molecule favored the down-buckled Si atom, and the H atom of the water molecule favored the up-buckled Si atom. This is explained by the attractions between the negatively charged O of the water and the positively charged down-buckled Si atom and between the positively charged H of the water and the negatively charged up-buckled Si atom. Following the adsorption of the first water molecule on the surface, a second water molecule adsorbed on either the inter-dimer or intra-dimer site of the Si dimer. The dipole-dipole interaction of the two adsorbed water molecules led to the formation of the water dimer, and the dissociation of the water molecules occurred easily below the order-disorder transition temperature. Therefore, the 1/2 monolayer of -OH on the water-terminated Si (001) surface shows a regular distribution. The results shed light on the atomic layer deposition process of alternate gate dielectric materials, such as $HfO_2$.

• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.429-435
• /
• 2003

Vinyl addition copolymerizations of norbornene (NB) and 5-vinyl-2-norbomene (VNB) were carried out using a cationic η$^3$-allyl palladium catalyst in the various mole ratio of comonomers. The copolymers could be obtained in good yield (65∼85%) with high weight-average molecular weights (M$_{w}$ > 760,000). Depending on increasing VNB contents, the molecular weight and yield of the copolymers decreased. FT-IR analysis confirmed that actual contents of VNB in polymer were proportional to the feeding content of VNB. From $^1$H-NMR spectroscopy, we found that both exo and endo VNB isomer were copolymerized with NB. Thermal stabilities of NB-VNB copolymers were independent on the VNB content and their initial decomposition temperatures were about 300 C. The NB-VNB copolymers were followed by epoxidation by using m-CPBA and hydroxylation by 9-BBN, respectively, and these post-polymers were characterized by FT-IR spectroscopy and $^1$H-NMR analysis..