Modified polyethylenes with polar side groups of -COOK, $-CONH_2$, and -COOH were prepared at a dispersion state in water by reacting poly(ethylene-co-methylacrylate) (PEMA) with aqueous solution of KOH and ammonia. Types and their contents of side groups were investigated by infrared spectroscopy, elemental analysis and atomic absorption analysis. Solution viscosity and surface tension were also measured as a function of solid contents. Stability and transparency of the dispersions were greatly affected by the content of COOK in the side groups. The stable dispersion could be prepared at a composition of COOK of 20 mole% at least. The transparency was increased with increasing the COOK contents, but decreased with increasing the amide content at a constant composition of COOK. Solution viscosities increased abruptly at a lower solid content when the COOK contents were increased, implying higher entanglement between the chains in dispersions with higher content of hydrophilic COOK group. The dispersions of higher COOK content revealed lower surface tension values.
As a fundermental research for quality stailization of herb extract, the effects of water activity on microbial growth in herb extract were investigated. Herbs-Panax ginseng, Cinnamomum cassia, Lycium chinense, Zyzyphus jujuba, Lindera obtusilobum-were mixed and extracted with water at $80^{\circ}C$ and concentrated at $75^{\circ}C$. Water activity of the herb extract was adjusted to 0.86, 0.80 and 0.69, using water activity analyzer. The extracts were incubated for 180 days at $40^{\circ}C$ and then examined microbial cell counts and some physicochemical properties. In the extract of $a_{w}$ 0.86, 18 CFU/g of initial viable cell was increased to 80 CFU/g with 90 days of incubation and to 190 CFU/g 180 days of incubation. In the extract of $a_{w}$ 0.80, 24 CFU/g of initial viable cell was also increased to 83 CFU/g during the 90 days of incubation and to 170 CFU/ g for the 180 days of incubation. However, in the extract of $a_{w}$ 0.69, viable cell after 180 days of incubation was remained at almost the same level as initial viable cell. pH of herb extract was reduced in proportion to the decrease in water activity. The TLC (thin layer chromatography) patterns of ginseng saponins of herb extract did not show any significant changes after 180 days of incubation. Growth of pathogenic microorganisms was inhibited more with lower water activity of the herb extracts. In the herb extract inoculated with Candida albicans and Aspergillus niger, initial viable cells of 150 and 140 CFU/g were decreased to 30 and 20 CFU/g, repectively, after 30 days of incubation at $28^{\circ}C$. In the case of herb extract inoculated with Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa, growth of the bacteria was totally inhibited even after 30 days of incubation at $37^{\circ}C$.
Kim, Myeong-Sun;Park, Seong-Min;Gwon, Il-Jun;Seo, Mal-Yong;Kim, Hye-Jeong
Proceedings of the Korean Society of Dyers and Finishers Conference
/
2011.03a
/
pp.103-103
/
2011
비스코스레이온(Viscose Rayon)소재는 목재 펄프를 원료로 한 재생섬유(습식방사)로서 Drape성과 반발성은 탁월하나, 습식방사에 따른 분자구조적 불안정성으로 건 습열처리시 형태불안정(치수변화율이 큼)으로 제직(준비) 및 후공정상 여러 가지 Trouble 유발과 완제품 세탁시 수축발생으로 종종 Dry Creanning 해야 하는 문제점들이 내재되어 있다. 또한 수분흡수시 강도저하, 수축과 구김, 염색 불균염 등의 문제점과 섬유공정상 생활취급상에 많은 애로를 가지고 있으며, 구성고분자가 수소결합에 의해 강고하여 "신축문제", 수분흡수시 팽윤(Swelling)에 의한 형태불안, 즉 "수축문제"가 개선해야 할 고질적 문제로 남아있다. 따라서 본 연구에서는 레이온 소재의 형태안정화 제품을 개발하기 위하여 복합사고공 및 염색가공 기술을 개발하고자한다. 신축 및 복합기술에 의한 Rayon DTY, N/R 신축 및 복합기술에 의한 Rayon DTY, N/R 복합가공사를 개발, 제편직 요소기술과 염가공기술을 연구하므로서 형태안정성 레이온 복합소재 제품을 개발하고자 한다. Rayon 소재의 후공정 용이성과 형태안정성을 부여하기 위하여, 레이온 DTY가공사, Rayon-합섬 장(長)-장(長) 복합사를 개발하여 CoolBiz용 냉감소재 및 스포츠 웨어 소재 등으로 활용하고자 한다. 사가공기술에 의한 신도 16%, 수축률 1.6%인 형태안정 Rayon DTY 소재를 개발하였으며, 선연후가공기술에 의하여 N/R 복합가공사를 개발, 신도 18%, 수축률 1.2%인 차별화 레이온 소재를 개발하였다. 이에 기존 Rayon 후가공 및 염색공정과 상이한 개발된 선연후 가연 Rayon DTY가공사 및 T/R혼방사를 활용한 직물에 대하여 최적 전처리, 염색 후가공 공정의 최적 조건을 알아보았다.
To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.
A series of foamed plastic sheets containing biomass (as HMR container) were developed via different foaming process temperatures, and their density, porosity, WVTR, and pore morphology were evaluated. Thermal stability of samples during re-heating the food in oven, change in morphology, density, porosity, and WVTR were investigated using a simulated thermal shock process according to MIL-STD-883E assay. As such, the pore size of samples was generally increased with increasing temperature of the foaming process. It can be explained that as foaming temperature increased, the viscosity of molten resins and the repulsive force against pore expansion decreased. In addition, an increase in the thermal shock cycle reduced the pore size and WVTR, while density increased because high temperature treatment that softened the sheet matrix was followed by a low temperature incubation, which contracted the matrix, thereby changing the physical and morphological properties of samples. However, an insignificant change in density was observed and WVTR tended to be decreased, indicating that as-prepared foamed plastic sheets could be used as a high thermal stable container for HMR application. Therefore, it found that the properties of newly developed HMR containers containing biomass were dependent on the foaming process temperature. Moreover, to better understanding of these newly developed containers, further investigations dealing with foaming process temperature based on various food items and cooking conditions are needed.
The effect of silane coupling agents on the water stability of HAC/PVA based MDF cement composites which were modified with urethane and epoxy resin were studied as a function of the functional groups and addition amount of silane coupling agent. According to the composition of polymer matrix the silanes with different functional groups showed the different effectiveness. In case of the only PVA matrix the silane with vinyl functional group was more effective than other silanes. When the epoxy resin was added the silane of epoxy-methodxy group enhanced the flexural strength of dry and wet state more than other. In case of urethane-added MDF cement the silane of diamine group was effective and enhanced the water sta-bility fo MDF cement composite more and more as the addition amount of silane increased, Especially in case of warm-presed composite the effect of silane was enhanced By addition of 2wt% of silane with 야-amine group the flexural strength of urethane-added composites were enhanced by 20% more in dry state 40-70% in wet state in accord with the porosity analysis. The flexural strength of the poxy resin-added MDF cement composite was increased by addition of 1wt% and 2wt% silane of epoxy-methoxy group However the addition of 4wt% of silane decreased the flexural strength of dry and wet state by formation of closed pore in the polymer matrix.
The major purpose of this study is to construct an in-situ soil moisture verification network employing Frequency Domain Reflectometry (FDR) sensors for Cosmic-ray soil moisture observation system operation as well as long-term field-scale soil moisture monitoring. The test bed of Cosmic-ray and FDR verification network system was established at the Sulma Catchment, in connection with the existing instrumentations for integrated data provision of various hydrologic variables. This test bed includes one Cosmic-ray Neutron Probe (CRNP) and ten FDR stations with four different measurement depths (10 cm, 20 cm, 30 cm, and 40 cm) at each station, and has been operating since July 2018. Furthermore, to assess the reliability of the in-situ verification network, the volumetric water content data measured by FDR sensors were compared to those calculated through the core sampling method. The evaluation results of FDR sensors- measured soil moisture against sampling method during the study period indicated a reasonable agreement, with average values of $bias=-0.03m^3/m^3$ and RMSE $0.03m^3/m^3$, revealing that this FDR network is adequate to provide long-term reliable field-scale soil moisture monitoring at Sulmacheon basin. In addition, soil moisture time series observed at all FDR stations during the study period generally respond well to the rainfall events; and at some locations, the characteristics of rainfall water intercepted by canopy were also identified. The Temporal Stability Analysis (TSA) was performed for all FDR stations located within the CRNP footprint at each measurement depth to determine the representative locations for field-average soil moisture at different soil profiles of the verification network. The TSA results showed that superior performances were obtained at FDR 5 for 10 cm depth, FDR 8 for 20 cm depth, FDR2 for 30 cm depth, and FDR1 for 40 cm depth, respectively; demonstrating that those aforementioned stations can be regarded as temporal stable locations to represent field mean soil moisture measurements at their corresponding measurement depths. Although the limit on study duration has been presented, the analysis results of this study can provide useful knowledge on soil moisture variability and stability at the test bed, as well as supporting the utilization of the Cosmic-ray observation system for long-term field-scale soil moisture monitoring.
The effects of water activity and light on the oxidation of carotenoid were studied using both the model systems of carrot lipids and freeze dried carrot. Autoxidation of crude lipids from the freeze dried carrot and the stability of carotenoids in controlled systems varing water activities and/or lights were examined. The degree of autoxidation of crude lipid stored at $30^{\circ}C$ for 16 days was significant(p< 0.05) and 71.8% destruction of carotenoid in the crude lipids were observed. When the powdered solid models of freeze dried carrot were stored at $30^{\circ}C$ for 35 days under various water activities and the presence of light, the maximum stability of carotenoid was found at $a_{w}$ 0.42 and the damaging effect of lights on the stability of carotenoid was significant (p<0.05). The absoprtion spectra of carotenoids changed according to the degree of oxidation, but shifts of the maximum wavelength was not observed.
본 논문에서는 소형 PEM(Proton Exchange Membrane) 연료전지 스택의 BOS(Balance of Stack) 제어에 관하여 논의한다. 별도의 가습 장치가 필요치 않고 BOS의 구성이 비교적 간단한 소형 PEM 연료전지 시스템에서는 팬과 퍼지밸브만의 제어를 통해 스택 내부 수분의 조절과 열 관리가 수행된다. 따라서 본 논문에서는 부하에 따른 최적의 공기유량을 계산하고 요구되는 유량의 공급을 위해 팬을 제어하는 알고리즘을 통해 소형 연료전지 시스템의 과도응답 특성과 안정성을 향상시키는 방법에 관하여 제안한다. 150W급 소형 연료전지 시스템을 꾸미고, 마이크로컨트롤러를 이용한 제어회로를 구현하여 실험함으로써 제안된 알고리즘의 유용함을 검증하였다.
The melt intercalation to commercialize nanocomposites in a pilot scale was applied and the water absorption characteristics for polyamide/MMT nanocomposites manufactured by twin screw extruder was studied. As a result, water absorption decreased with the introduction of MMT and dimensional stability was improved. However, as water absorption increased, flexural strength and modulus were reduced. Therefore, the effect of MMT introduction on mechanical properties of nanocomposites was clearly observed, which may increase the level of strength by maintaining anti-water absorption property of nanocomposite.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.