• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.420-425
• /
• 1994

Soybean seeds deteriorate even before harvest, especially under high temperature and high relative humidity conditions. This study was conducted to determine the effect of harvest date on seed quality in early maturing soybean cultivars. Soybean cultivars used in the experiment were Damyang-native, having small seed with yellow color, and Yuhsuzumi, having large seed with green color. The length of physiological maturity to grain harvest was 24 days in Yuhsuzumi and 8 days in Damyang-native. The moisture contents of seed were 25.3 % in Yuhsuzumi and 14.5 % in Damyang-native cultivar when pod reached its mature pod color. The seed color of Yuhsuzumi started to turn yellow, and its germination rate was greatly decreased when harvest was delayed after maturity, However, Damyang-native cultivars produced seed of high quality regardless of delayed harvest.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.4
• /
• pp.388-392
• /
• 2004

키토산과 키토올리고당을 첨가한 식빵의 저장성을 조사하기 위하여 제빵시 키토산을 3%, 1%, 0.1%, 그리고 키토올리고당 1%를 첨가하여 저장 중 수분의 변화, pH의 변화, 미생물의 변화 등을 살펴보았다. 저장 중 수분의 변화는 첨가농도의 영향에 따라 저장기간이 경과할수록 수분이 감소하였는데, 그 폭은 대조구에 비해 완만하였다. 또 pH의 변화는 제빵 후 1일에는 키토산의 첨가량(3%, 1%, 0.1%)이 많을수록 pH가 높았으며, 저장 4일 이후부터 약간씩 낮아졌다. 그리고 키토올리고당 첨가구와 대조구는 처음부터 비교적 낮았으며 저장 기간에 따라 변화도 완만하였다. 그리고 생균수의 변화에 있어서는 키토산 0.1% 첨가구에서는 대조구에 비해 큰 차이가 없는 반면, 키토산 1%, 3% 첨가구에서는 농도에 따라 1∼2일 정도 생성이 늦었으며, 특히 키토올리고당 1%의 경우 3일 정도 느렸다. 또한 곰팡이 생성에 대한 육안 관찰에서도 대조구에서는 저장 3일째부터 곰팡이의 생성이 확인되었으나, 키토산 0.1% 첨가구에서는 4일째에 확인되었고, 키토산 1%와 3% 첨가구에서는 5일째에, 그리고 키토올리고당 1% 첨가구에서는 6일째에 관찰되었다. 이상의 결과를 종합해 볼 때 식빵 제조시 키토산 및 키토올리고당을 첨가할 경우 식빵의 shelf-life 연장에 효과가 있는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.632-638
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA) as starting materials. Subsequently, waterborne polyurethane-acrylic hybrid solutions were prepared by reacting the PUD with different amounts of the mixture of acrylate monomers, HEMA (2-hydroxyethyl methacrylate) and MMA (methyl methacrylate). As a result, the average particle size of waterborne polyurethane-acrylic hybrid solutions was increased with increasing the addition amounts of acrylate monomers. Also, the prepared coating films from waterborne polyurethane-acrylic hybrid solutions showed better abrasion resistance and chemical resistance than those of pure PUD.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.410-416
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA) as starting materials. Subsequently, polyurethane-acrylic hybrid solutions were prepared by reacting the PUD with different types of acrylate monomers, such as HEMA (2-hydroxyethyl methacrylate):MMA (methyl methacrylate), HEMA:BA (butylacrylate), HEMA:BMA (butyl methacrylate), HEMA:HEA (2-hydroxyethyl acrylate), HEMA:PETA (pentaerytritol triacrylate) mixture. Also, the effects of acrylate types on the chemical resistance and the abrasion resistance of polyurethane-acrylic hybrid solutions were investigated. The test results showed that the HEMA:MMA mixture had the strongest chemical resistance, while the HEMA:PETA mixture had the strongest abrasion resistance among several types of acrylate mixtures.

• Journal of Adhesion and Interface
• /
• v.16 no.4
• /
• pp.156-161
• /
• 2015

In this study, waterborne polyurethane acrylate were synthesized with polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylol propionic acid (DMPA), acrylate monomer to improve the properties and peel strength. In addition, the properties of the synthesized waterborne polyurethane acylate was evaluated through FT-IR, particle size analysis, UTM, peel strength. As the acrylic acid content increased, particle size increased. In the results of mechanical properties, when the acrylic acid contents increased, tensile strength was increased but elongation was decreased. All peel strength was improved as the acrylic acid contents of WPUA and acrylate ratio of PU/acrylate increased. Optimum peel strength obtained when acrylic acid was 0.5 wt%.

• Journal of Adhesion and Interface
• /
• v.11 no.3
• /
• pp.100-105
• /
• 2010

In this study, polyurethane dispersion was prepared by polyester polyol, 4,4-dicyclohexylmethane diisocyanate ($H_{12}MDI$), dimethylolpropionic acid (DMPA), and monomeric diol. The effect of various monomeric diol, polyol/monomeric diol molar ratio and DMPA contents on the properties of polyurethane dispersion were investigated. As the molecular weight of monomeric diol and monomeric diol molar ratio increased, $T_g$ gradually increased. And when DMPA contents increased, also $T_g$ gradually increased. In the results of mechanical properties, when the molecular weight of monomeric diol, monomeric diol molar ratio of polyol/monomeric diol and DMPA contents increased, tensile strength was increased. Finally, optimum peel strength obtained when polyol/monomeric diol ratio was 8 : 2.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.111-116
• /
• 2010

The treatment of heavy metal, in the waste ash from incinerator and mine solid waste, by using alkali-soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal has been studied. It seemed that alkali soluble acrylic copolymer emulsion was very effective in the absorption of Hg, Pb, Cd and Cu in this test. Also, eco-friendly thixotropic grout, using alkali soluble acrylic copolymer emulsion, that is effective in the absorption of heavy metal, for the recycling of waste ash from incinerator and mine solid waste has been tested. It was observed that waste ash could be used as a raw material of eco-friendly thixotropic grout mortar due to the effectiveness of alkali soluble acrylic copolymer emulsion in the fixation of heavy metals including $Cr^{6+}$ from waste ash in this test.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1533-1542
• /
• 2021

Eco-friendly polyurethane can be defined as a highly utilized material used in various fields. The various structural properties of the synthesis of isocyanates and polyols provide versatility and customization for use in the manufacturing field. The characteristics of polyurethane vary widely from soft touch coatings to hard building materials like rocks. These mechanical, chemical and biological properties and ease of alignment are drawing tremendous attention not only in the field of research but also in related industries. In order to improve the performance of water-dispersible polyurethane materials, it can be derived through processes such as adjusting the blending of raw materials and adding additives and nanomaterials. This study highlights the basic chemical structure of eco-friendly water-dispersible polyurethane in the fields of medical science, automobiles, coatings, adhesives, paints, textiles, marine industries, wood composite materials, and clothing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.362-365
• /
• 2011

단위면적당 증발산량 중 일부가 식생의 물질 생산에 이용될 수 있는지를 나타내는 지표인 수분 이용효율 (Water Use Efficiency, WUE)은 총 일차생산성(Gross Primary Productivity, GPP)과 단위면적당 증발산량(Evapotranspiration, ET)의 비로 산출된다. 이전 연구들에서의 수분 이용효율의 적용은 수분 스트레스에 대한 작물의 생산성 차이 분석과 같은 작물학과 농림학 분야의 연구들이 대부분이었지만. 기후 변화가 생태계 생산성 또는 에너지 수지에 영향을 미치는 등의 전 지구적 규모의 수문학적 연구에도 적용할 수 있다. 본 연구에서는, Moderate Resolution Imaging Spectroradiometer (MODIS) 영상자료에서 1km 해상도로 8일 단위의 총 일차생산성과 증발산량을 산정함으로써 수분 이용효율을 구하였다. 향후에는 산정된 이 지표를 남한지역에 적용하여 수분 이용효율에 대한 지도를 작성하고, 실측된 총 일차생산량과 증발산 값을 이용하여 검증한 후 알고리즘을 개선해 나갈 계획이다.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.47-53
• /
• 1999

In order to elucidate physiological factors involved in causing the winter injuries of evergreen Japanese rhododendron (Rhododendron obtusum cv. Hinodegiri) and semi-evergreen rhododendron (Rhododendron yedoense var. poukhanense), these studies were conducted from late winter to early spring. The results were summarized as follows; The water potential, water content in stem, water potential and content have continuously increased in both species between February and May. In R. yedoense, shading treatment had 0.3MPa upper water potential and 3% upper water content than the control. Rhododendron obtusum, the treatments with shading had 0.9MPa upper water potential and 11% upper water content that the control. The difference of water balance by treatments could be found in vitality of stem measured by TTC test. Especially R. obtusum in the treatments with shading in has higher vitality than the control. we find that winter damage of evergreen R. obtusum was determined by whether water balance could be recovered from water deficient state during the dehardening period, or not. In order to recover of the water balance, decreasing water loss more important than increasing water supply, and that was effectively acrueved by the treatment with shading.