• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.75-82
• /
• 2002

This paper propose a new mathematical modelling method about optimum operational schedule for cogeneration systems. Proposed algorithm solving the energy product cost function in this paper is very similar to the real model that is, proposed algorithm solve nonlinear type of real model using mixed integer programming based on the piecewise linear function while the conventional algorithms used before could not solve that kind of problems. The effectiveness of the proposed method is ascertained by the simulation results with varius case studies which are similar to real operation circumstances.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1998.09a
• /
• pp.17-19
• /
• 1998

우리나라의 연안역은 지금까지 선진국으로의 도약을 위한 경제개발 수행과정에서 임해공업단지 및 발전소 건설, 간척 ·매립사업의 추진 등 연안해역에서의 사회, 경제적 활동의 증가에 따른 해양오염과 생태계 파괴가 가중되고 있다. 이러한 문제를 해결하기 위해서 일반적으로 현장관측, 수리실험, 컴퓨터를 이용한 수치모델이 이용되고 있는데 경제적인 이유와 편리함 때문에 국내에서는 주로 수치모델에 의존하고있다. (중략)

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.235-235
• /
• 2023

하천 내에서 하상변동은 치수나 생태계에 직간접적인 영향을 끼치는 것으로 알려져 있다. 하상변동의 예측을 위한 여러 가지 모델들이 존재하지만 하상변동의 양상을 직관적으로 파악하기에는 어려움이 있다. 최근 수행된 연구결과에 따르면 하천의 수리 기하학적 형상이 부유사 농도와 유량과의 관계와 관련이 있는 것으로 밝혀졌다(Kim et al., 2018). 본 연구에서는 하상변동과 부유사의 농도를 밀접한 관련이 있다고 가정하여 수리기하(Hydraulic Geometry) 이론을 이용하여 하상변동의 경향성을 표현하여 하상변동의 경향성을 직관적으로 유추할 수 있는 기법을 제시하고자 한다. 이를 위해 본 연구에서는 하상변동을 수리기하적표현을 이용하여 해석적으로 제시하였고 수치모의를 실시하였으며 실제 자연하천에 대해 검증을 수행하였다. 수치모의는 자연에 존재할 수 있는 다양한 하천형상을 표현하기 위해 수리기하 이론에서의 수심과 폭을 나타내는 인자들을 이용하여 하천의 형상을 넓고 얕은 하천, 좁고 깊은 하천, 중간 정도의 하천으로 분류하였으며 흐름조건을 정상류와 부정류조건으로 분류하였다. 또한 하상경사와 하상재료의 입경분포를 고려하였다. 그리고 실제 하천에 대한 검증은 대한민국에 존재하는 갑천, 미호천, 남강, 임진강, 원주천, 금호강의 하상변동 자료를 이용하여 실시하였다. 하상변동의 경향성을 직관적으로 표현하기 위해 Manning 공식을 이용하여 하상전단력의 수리기하 지수를 수심, 유속, 조도계수의 수리기하지수들로 표현하였다.

• Tunnel and Underground Space
• /
• v.9 no.4
• /
• pp.328-336
• /
• 1999

To characterize the hydro-mechanical behavior of a rock joint, a rotary shear testing apparatus was devised in this study. Shear stress was driven by twisting the end of a sample in the rotary shear testing apparatus. The test results show that the rotary shear test underestimates the peak shear strength of a rock joint. The torque is known as a function of the radial distance from the axis of rotation, resulting in the radial variation of the shear stress. Fluid flow through rock joints is mainly dependent on the Joint roughness, contact area, initial aperture. To examine the dependency, the relationship between the hydraulic and the mechanical apertures for shear-flow was established by measuring the initial aperture. It shows that the mechanical aperture and the hydraulic aperture increase linearly with the dilatancy. The difference between the hydraulic and mechanical apertures describes the deviation from the behavior predicted by the parallel plate model.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.105-115
• /
• 2000

As large underground projects such as radioactive waste disposal, hot water and heat storage, and geothermal energy become influential, the study, which consider all aspects of thermics, hydraulics and mechanics would be needed. Thermo Hydro-Mechanical coupling analysis is one of the most complex numerical technique because it should be implemented with the combined three governing equations to analyze the behavior of rock mass. In this study, finite element code, which is based on Biot's consolidation theory, was developed to analyze the thermo-hydro-mechanical coupling in continuum rock mass. To verify the implemented program, one-dimensional consolidation model under the isothermal and non-isothermal conditions was analyzed and was compared with the analytic solution. The parametric study on two-dimensional consolidation was also performed and the effects of several factors such as poisson's ratio and hydraulic anisotropy on rock mass behavior were investigated. In the future, this program would be revised to be used for analysis of general discontinuous media with incorporating discrete joint model.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.355-365
• /
• 2000

As large underground projects such as radioactive waste disposal, hot water and heat storage, and geothermal energy become influential, the study, which consider all aspects of thermics, hydraulics and mechanics would be needed. Thermo-Hydro-Mechanical coupling analysis is one of the most complex numerical technique because it should be implemented with the combined three governing equations to analyze the behavior of rock mass. In this study, finite element code, which is based on Biot's consolidation theory, was developed to analyze the thermo-hydro-mechanical coupling in continuum rock mass. To verify the implemented program, one-dimensional consolidation model under the isothermal and non-isothermal conditions was analyzed and was compared with the analytic solution. The parametric study on two-dimensional consolidation was also performed and the effects of several factors such as poisson's ratio and hydraulic anisotropy on rock mass behavior were investigated. In the future, this program would be revised to be used for analysis of general discontinuous media with incorporating discrete joint model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.281-281
• /
• 2019

수리모형실험은 수로 내에서 장시간 파랑을 발생시킬 경우, 수로 내에 반사 파랑의 성분이 누적될 수 있어 상당한 계측 오차를 발생시킬 우려가 있어 수리모형실험 결과의 검증이 필요하다. 일반적으로 수리모형실험 결과의 검증을 위해서는 동일 실험을 무수히 반복하여 불확실성을 제거하거나 다양한 수리실험실에서 수리모형실험을 수행하고 결과를 분석하여 불확실성을 제거할 수 있다. 그러나 이는 엄청난 시간과 노력은 물론 막대한 실험비용이 소요되기 때문에 경제적으로 효용성이 매우 낮아 현실적으로 수행이 어렵다. 이에 비해 수치모형실험은 상대적으로 저렴한 비용으로 수행할 수 있으며, 다수의 실험을 수행하지 않아도 불확실성을 제거할 수 있어 수리모형실험의 검증에 효율적이다. 일반적으로 난류 거동을 동반하는 복잡한 구조물 주변의 흐름 해석에는 3차원 CFD 모형이 필요하다. 특히, 병렬연산이 가능한 CFD 모형을 활용하면 수리모형실험에서도 재현이 쉽지 않은 다양한 조건에 따른 복잡한 흐름을 해석할 수 있어 효용성이 점점 증가하고 있다. 그러나 복잡한 구조물이 존재하게 되면 구조물에 재현에 막대한 격자구조가 필요하여 현실적으로 적용이 쉽지 않다. 이에 대한 대안으로 복잡한 구조물을 비교적 큰 격자에서 재현할 수 있는 가상경계법을 활용하는 연구가 활발히 진행되고 있다. 가상경계법은 Navier-Stokes 방정식에서 유체 내에 존재하는 고체를 모멘텀 이론으로 대체하여 고려하는 기법으로 수치모델링 수행 시 매질을 유체만으로 구성할 수 있어 안정적으로 적용할 수 있는 것으로 알려져 있다. 본 과업에서는 다양한 분야에서 널리 활용되고 있는 3차원 CFD 모형인 OpenFOAM®기반으로 파랑해석에 필요한 경계조건을 계산할 수 있는 olaFlow를 활용하여 복잡한 구조물을 지나는 파랑해석을 수행하기 위해 가상경계법을 olaFlow에 도입한 수치 알고리즘을 개발하였다. 개발한 수치알고리즘을 활용하여 복잡한 구조를 수치모델에서 재현하였으며, 수치모델에 적용된 수치 알고리즘의 안정성에 대해 고찰하였다.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.55-66
• /
• 2021

Hydraulic-mechanical (H-M) coupled numerical modeling was used to evaluate the evolution of hydrogeological properties in response to the installation and expansion of a borehole. A domain with a discrete fracture network was adopted for discontinuum modeling to simulate changes in fracture apertures. Comparison with real hydraulic test data shows that the effects of principal stress direction and expansion of borehole diameter were reasonably simulated by H-M coupled numerical modeling. The modeling confirmed that aperture changes depended on the principal stress direction, with an increase in aperture size due to vertical displacement being the dominant effect. A concentration of shear dilation around the borehole had an additional, subsidiary, effect on the hydrogeological evolution. These results show that the permeability of fractured rock can be increased by changing the hydraulic properties of a fracture through stress redistribution caused by the installation and expansion of a borehole.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.306-319
• /
• 2020

Characterizations of Excavation Damage Zone (EDZ), which is hydro-mechanical degrading the host rock, are the important issues on the geological repository for the spent nuclear fuel. In the DECOVALEX 2019 project, Task G aimed to model the fractured rock numerically, describe the hydro-mechanical behavior of EDZ, and predict the change of the hydraulic factor during the lifetime of the geological repository. Task G prepared two-dimensional fractured rock model to compare the characteristics of each simulation tools in Work Package 1, validated the extended three-dimensional model using the TAS04 in-situ interference tests from Äspö Hard Rock Laboratory in Work Package 2, and applied the thermal and glacial loads to monitor the long-term hydro-mechanical response on the fractured rock in Work Package 3. Each modelling team adopted both Finite Element Method (FEM) and Discrete Element Method (DEM) to simulate the hydro-mechanical behavior of the fracture rock, and added the various approaches to describe the EDZ and fracture geometry which are appropriate to each simulation method. Therefore, this research can introduce a variety of numerical approaches and considerations to model the geological repository for the spent nuclear fuel in the crystalline fractured rock.