• Journal of the Korea Society for Simulation
• /
• v.15 no.3
• /
• pp.103-114
• /
• 2006

Now distribution centers include an ASRS (Automated Storage and Retrieving System) and automated transfer systems such as conveyors and AGV (Automated Guided Vehicle). These automated distribution centers have lots of parameters to be considered fur operating performance. The general basic parameters in the distribution centers are specifications of storage equipment, system operating rules, configuration of storage area and unit load features. In this paper, an approach using simulation and metamodeling with response Surface method to optimize the design parameters of an automated distribution center model is presented. The simulation based metamodel will constitute an efficient approximation of the system function, and the approximate function will be used to design rapid optimal parameters of the distribution center model. This paper provides a comprehensive framework for economical material flow system design using the simulation and metamodeling.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.83-92
• /
• 2005

Fluid conductivity logging has been applied in the boreholes to identify the permeable fi:actures and estimate the origin of saline groundwater in coast area. Fluid replacement technique measures the fluid electrical conductivity with depth at different times in a well after the borehole is first washed out with different water by passing a tube to the borehole bottom. Then formation water flows into the borehole through aquifer such as permeable fractures or porous formation during ambient or pumping condition. Measured conductivity profiles with times therefore indicate the locations of permeable zone or fractures within the open hole or the fully slotted casing hole. As a result of fluid conductivity logging for three boreholes in the study area, it is interpreted that saline groundwater is caused by seawater intrusion through fractured rock, although the effect by land reclamation partially remains. We are planning the quantitative analysis to estimate the hydraulic characteristics using fluid replacement technique, and this approach might be usefully utilized for assessing the characteristics of seawater intrusion, the design of optimal pumping, and estimating the hydraulic properties in coastal aquifer.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.35-47
• /
• 2005

This paper is to review a literature concerning Bus Transit Route Network Design(BTRNDP), to describe a future study direction for a systematic application for the BTRNDP. Since a bus transit uses a fixed route, schedule, stop, therefore an approach methodology is different from that of auto network design problem. An approach methodology for BTRNDP is classified by 8 categories: manual & guideline, market analysis, system analytic model. heuristic model. hybrid model. experienced-based model. simulation-based model. mathematical optimization model. In most previous BTRNDP, objective function is to minimize user and operator costs, and constraints on the total operator cost, fleet size and service frequency are common to several previous approach. Transit trip assignment mostly use multi-path trip assignment. Since the search for optimal solution from a large search space of BTRNDP made up by all possible solutions, the mixed combinatorial problem are usually NP-hard. Therefore, previous researches for the BTRNDP use a sequential design process, which is composed of several design steps as follows: the generation of a candidate route set, the route analysis and evaluation process, the selection process of a optimal route set Future study will focus on a development of detailed OD trip table based on bus stop, systematic transit route network evaluation model. updated transit trip assignment technique and advanced solution search algorithm for BTRNDP.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.687-694
• /
• 2008

Given the daily tactical schedule, the purpose of the traffic management system is to develop operating plan that will achieve the stated schedule as best as possible. The operating plan has to be modified during the day because of occurring disturbance(e.g. delay, infrastructure breakdown, etc.) Conflict detection and resolution(CDRS) are aimed for adjusting the distorted schedule to tactical schedule. Our research separate CDRS into two hierarchy modules, line conflict control module and station conflict control module. We define the role of each modules and design the cooperative architecture. We suggest the conflict detection and resolution approach based on mathematical model. These results can be implemented as prototype modules.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.95-103
• /
• 2022

Quick and accurate understanding of the situation in a severe accident is essential for conducting the appropriate accident management and response using the accident diagnosis information. This study employed deep learning technology to diagnose severe accidents through the major safety parameters transferred from a nuclear power plant (NPP) to AtomCARE. After selecting the major accident scenarios to consider, a learning database was established for particular scenarios affiliated with major scenarios by performing a large number of severe accident analyses using MAAP5 code. The severe accident diagnosis technology, which classifies detailed accident scenarios using the major safety parameters from NPPs, was developed by training it with the established database . Verification and validation were conducted by blind test and principal component analysis. The technology developed in this study is expected to be extended and applied to all severe accident scenarios and be utilized as a base technology for quick and accurate severe accident diagnosis.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.1
• /
• pp.19-25
• /
• 2022

Physical experiments were conducted to establish an empirical formula that predicts the wave force on the upside of the pavement behind crown wall of rubble mound seawall due to wave overtopping as well as the uplift force on the downside of the pavement. The experiments were performed by different conditions of the parapet, water depth, relative freeboard, and thickness of the armour layer. Then, the wave force on the upside and downside of the pavement behind the crown wall was analyzed. The parameters that affect the wave overtopping force and the uplift force were identified and empirical formulae were suggested for evaluating the forces on the pavement.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.232-232
• /
• 2022

1차원 관망해석모형과 2차원 지표면범람 해석모형을 이용한 도시지역의 실시간 홍수예·경보시스템 구축은 모형의 모의에 많은 시간이 소요되므로 한계가 있다. 또한, 연구유역에서 시나리오 강우에 대해 침수를 유발시키는 한계강우량을 1-2차원 모형의 시행착오법을 적용한 반복적인 수행을 통해 산정하는 것은 비효율적인 방법이다. 따라서, 본 연구에서는 이에 대한 해결책으로 로지스틱 회귀를 이용하여 배수분구별 침수 발생기준 강우량을 산정하고자 한다. 침수 발생 한계강우량 산정을 배수분구 단위로 제시하기 위하여 로지스틱 회귀분석을 이용하였다. 풍수해저감종합계획(2015)과 침수흔적도를 이용하여 배수분구 별 침수이력에 대한 데이터베이스를 구축하고, 이를 1-2차원 수리해석을 통한 침수심과 함께 로지스틱 회귀모형에 학습하였다. 지속시간 1시간, 10mm 강우부터 500년 빈도의 Huff 3분위 시나리오 17개를 사용하여 확률강우량을 산정하였고, 이를 1-2차원 수리해석을 위한 입력자료로 사용하였다. EPA-SWMM을 통한 1차원 도시유출해석과 FLO-2D를 통한 2차원 침수해석에서 20cm 이상의 침수심이 발생하거나 지상관측자료, 침수흔적도 및 풍수해저감종합계획에서 실제 침수가 발생했을 경우를 1, 그렇지 않은 경우를 0으로 하여 데이터베이스를 구축하여 로지스틱 회귀모형에 학습시켜 침수 발생 한계강우량을 산정하였다. 로지스틱 회귀분석을 통해 서울시 지역의 배수분구별 한계강우량을 산정할 수 있으며, 지속적으로 관측되는 강우 및 침수 발생 유무 자료를 추가함으로써 산정된 침수 한계강우량을 상회하는 강우 사상이 나타났을 시에 침수 발생 유무를 확인하여 본 연구에서 제안한 방법에 대해 검증이 가능할 것으로 보인다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.5
• /
• pp.1089-1098
• /
• 2018

As the development of quantum computers becomes visible, the researches on post-quantum cryptography to alternate the present cryptography system have actively pursued. To substitute RSA and Elliptic Curve Cryptosystem, post-quantum cryptography must also consider side channel resistance in implementation. In this paper, we propose a side channel analysis on NTRU, based on the implementation made public in the NIST standardization. Unlike the previous analysis which exploits a thousands of traces, the proposed attack can recover the private key using a single power consumption trace. Our attack not only reduces the complexity of the attack but also gives more possibility to analyze a practical public key cryptosystem. Furthermore, we suggested the countermeasure against our attacks. Our countermeasure is much more efficient than existing implementation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.440-440
• /
• 2018

홍수피해의 위험성이 증가하고, 발생 시기가 불규칙해짐에 따라 보다 효과적인 홍수위험관리가 요구되며, 최적의 홍수피해저감대책을 수립하기 위해서는 다양한 홍수피해저감 대책들에 대해서 비용대비 피해저감효과 분석이 필요하다(FLOODsite, 2007). 홍수피해저감효과를 분석하기 위해서는 수리 수문학적 분석을 통한 피해범위와 침수심 등 피해규모를 분석함과 함께 피해규모에 따른 홍수피해액 추정이 가능해야 하며, 이를 통해 홍수피해저감 대책에 대한 비용대비 효과분석 수행이 가능하다(Kim et al., 2014). 국내에서 많이 적용되고 있는 다차원법은 침수편입율을 산정하고 건물에 대해서 손상률에 해당하는 피해율이 제시되어 있으며, 이를 이용하여 구조물과 내용물에 대해 피해액을 추정할 수 있다(Choi et al., 2006a; Choi et al., 2006b; Yi et al., 2010). 그러나, 단독주택, 아파트, 연립주택 등 주택 이외 다른 용도의 건물에 대해서는 손상함수가 없어 우리나라 여건에 맞는 공공건물에 대한 손상함수 개발이 필요한 상황이다. 본 연구에서는 실제 피해지역의 자료들을 토대로 공공건물 용도별 침수심별 손상함수를 개발하고 적용하였다. 공공건물에 대한 손상함수 개발을 위해서는 많은 피해자료의 수집이 필요하나, 실제 공공건물의 경우 다양한 건물유형으로 인하여 유형별 침수사례가 많지 않은 상황이다. 이로 인하여 현장조사에 의한 침수현황 조사는 한계가 있기 때문에 보험가입자에게 사고로 인하여 손해가 발생했을 때 그 손해액을 결정하고 보험금을 산정하는 업무를 수행하는 손해사정사들을 통해 여러 가지 공공건물을 대상으로 침수심별 손상률에 대한 설문 조사를 실시하였다. 본 연구를 통해 공공건물에 대한 손상함수의 개발절차, 침수심별 손상함수의 개발결과, 보완과정 그리고 손상함수의 적용결과에 대한 국내외 기법과의 비교 결과를 제시하였다. 적용결과 본 연구에서 현장 조사 기반으로 개발한 손상률을 적용한 경우 국내 실제 피해액을 가장 잘 반영하는 것으로 분석되었는데, 다만 동일 건물용도(예컨대 공공업무시설)일지라도 바닥재 등 마감재 재질이 건물마다 다르며, 건물별로 공간 활용 여건이 다양하여 동일한 침수심에 대해서 피해액의 변동폭이 크게 발생 되어 동일한 침수심에 대한 피해내용이 달라져 변동폭이 크게 발생되는 한계가 발생하였다. 향후 보다 많은 피해사례를 지속적으로 조사할 필요가 있으며, 이를 통해 손상함수를 개선하기 위한 연구가 계속 진행되어야 할 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.88-95
• /
• 2018

Maintainability indicates how easily a system can be restored to the normal state when a system failure occurs. Systems developed to have high maintainability can be competitive due to reduced maintenance time, workforce and resources. Quantification of the maintainability is possible in many ways, but only after prototype production or with historical data. As such, the graph theory and 3D model data have been used, but there are limitations in management efficiency and early use. To solve this problem, we studied the maintainability index of weapon systems using SysML-based modeling and simulation technique. A SysML structure diagram was generated to simultaneously model the system design and maintainability of system components by reflecting the maintainability attributes acquired from the system engineering tool. Then, a SysML parametric diagram was created to quantify the maintainability through simulation linked with MATLAB. As a result, an integrated model to account for system design and maintainability simultaneously has been presented. The model can be used from early design stages to identify components with low maintainability index. The design of such components can be changed to improve maintainability and thus to reduce the risks of cost overruns and time delays due to belated design changes.