• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.948-952
• /
• 2006

인구의 증가와 경제의 발전으로 인해 한정된 수자원에 대한 수요가 급증하였고 향후 고도의 복지사회 구현과 지방 자치화에 따른 각종 용수 수요에 대한 심각한 물 배분 문제가 대두되고 있다. 특히 심각하게 물 배분 문제가 야기될 때 각 수요지점별로 필요한 용수를 공급하기 위해서 단지 상류에서 하류 단으로 물을 배분한다면 수리권의 공정성 문제가 제기되며 물 관리 원칙의 결여에 따른 곤란한 상황이 발생할 수 있다. 이렇게 갈수 및 가뭄 시와 같이 물 배분 문제가 생길시 에는 우선 하천유역 전체의 가용수량을 파악한 후 각 용수 사용별로 중요성을 감안하여 용수공급 우선순위를 설정하여 전 하천 유역을 통하여 일관된 배분을 실시할 수 있는 수자원 최적화 배분 시스템을 개발 할 필요성이 있다. 이러한 문제를 해결하기 위하여 본 연구에서는 한국수자원공사 수자원연구원과 콜로라도주립대학에서 공동 개발한 유역 네트워크 유량 모델(River Basin Network Flow Model)인 K-MODSIM을 이용하여 유역통합 실시간 일 저수지 운영 모델을 개발하였다. 개발된 유역통합 실시간 일운영 모델은 금강유역에 적용하였으며, 금강유역을 12개의 소유역으로 구분하고, 용담댐과 대청댐을 포함하며, 유역관리는 용수공급, 치수대책, 발전수력 및 하천 유지용수의 공급등의 유역내 수자원 관리 상황을 포함하였다. 이처럼 유역의 매우 자세한 세부사항을 고려함으로서 기존에 개발된 모델이 가지고 있던 단순화의 단점을 보완하고 유역의 특성을 최대한 반영하도록 하였다. 또한 유역통합 실시간 일운영 모델의 장기적인 저수지 운영 문제를 해결하기 위해 암시적 추계학적 동적계획법을 사용하여 도출된 월운영룰을 일운영모델에 적용할 수 있는 방법을 제시 하였다.기능으로 구성되어 있으며, 각 기능을 선택하면 해당 화면으로 GUI가 전환된다. 따라서 다량의 측정자료의 신뢰성을 유지하고 이를 모형의 입력자료로 활용하는 일련의 과정을 시스템화하기 때문에 자료의 이상적 유지 관리가 이루어지며 복잡한 2차원 수질해석 모형을 수월하게 운영할 수 있는 시스템으로 개발하였다.제외하면, 부자측정 방법에 의한 유량산정시 가장 큰 오차원인은 홍수시 측정된 유속측선의 위치와 홍수 전후로 측정된 횡단면상의 위치가 일치하지 않는 점과, 대부분 두 측정 구간의 평균값을 대푯값으로 사용한다는 점이다. 본 연구는 다년간의 유량 측정 및 검증 경험과 자료를 토대로 현장에서 부자를 이용하여 측정된 측정성과를 정확도 높은 유량자료로 산정하는데 있어서의 문제점을 도출하고, 이로 인해 발생하는 오차를 추정하여 그 개선방안을 제시해 보고자한다. 더불어 보다 정확한 유량 산정을 위한 기준과 범주를 제시하고자 한다.리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.124-132
• /
• 2016

In order to estimate the effect of flow distributors connected to an upper nozzle of CMT(Core Makeup Tank) on the thermal-hydraulic characteristics in the tank, a simplified 2 inch Small Break Loss of Coolant Accident(SBLOCA) was simulated by skipping the decay power and Passive Residual Heat Removal System(PRHRS) actuation. The CMT is a part of safety injection systems in the SMART (System Integrated Modular Advanced Reactor). Each test was performed with reliable boundary conditions. It means that the pressure distribution is provided with repeatable and reproducible behavior during SBLOCA simulations. The maximum flow rates were achieved at around 350 seconds after the initial opening of the isolation valve installed in CMT. After a short period of decreased flow rate, it attained a steady injection flow rate after about 1,250 seconds. This unstable injection period of the CMT coolant is due to the condensation of steam injected into the upper part of CMT. The steady injection flow rate was about 8.4% higher with B-type distributor than that with A-type distributor. The gravity injection during hot condition tests were in good agreement with that during cold condition tests except for the early stages.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.18-30
• /
• 1999

This study was carried out to compare the characteristics of hydraulic architecture by measurement of leaf specific conductivity(LSC) in the twenty-one deciduous broad-leaved species. The LSC's of stems were higher than in branches except Acer mono, A. triflorum, Betula schmidtii, Fraxinus rhynchophylla and Zelkova serrata, and lowest in junction parts as compared with stems and branches. In diffuse-porous species, the LSC was much higher in B. plalyphylla var. iaponica, B. schmidtii, Cornus controversa, Tilia amurensis than those of other species and especially lowest in A. triflorum. In ring-porous species, the LSC was much higher in Maackia amurensis, Paulownia tomentasa, Quercus aliens, Q. serrata than those of other species and lowest in Ulmus davidiana var. japonica. The LSC's of 1-year-old terminal shoots of stem(the leader and adjacent laterals) in A. triflorum, C. controversa. F. mandshurica, Q. mongolica and Z. serrata ranged from 22 to $139{\mu}{\ell}/g$ in the leaders, and 11 to $73{\mu}{\ell}/g$ in the adjacent laterals. The LSC's of leaders were usually greater than the adjacent laterals because of the hydraulic dominance of the leader shoot.

• Clean Technology
• /
• v.17 no.1
• /
• pp.62-68
• /
• 2011

Hydrodynamic characteristics in multistage annular type fluidized bed (riser: $0.01{\times}0.025{\times}2.8m^3$, J-valve: $0.009{\times}0.015m^2$)were investigated. Glass beads ($d_p=101{\mu}m$, ${\rho}_b=1,590kg/m^3$, $U_{mf}=1.25{\times}10^{-2}m/s$, Geldart classification B) was used as a bed material. Accumulated weight by the electronic balance was measured to determine the solid flow rate in batch-type. In circulation condition, we measured the accumulated weight of particle transported from riser. At the steady state condition, solid circulation rate was calculated from time interval of the heated bed material passing between two thermocouples. Solid flow rate increased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 2.2 to 23.4 kg/s. However, mean residence time decreased with increasing inlet gas velocity ($1.2-2.6U_{mf}$) and the static bed height (z, 0.24-0.68 m) from 1,438 to 440 s. The solid holdup in the riser was determined by measuring pressure differences according to the riser height. These results showed a similar trend to that of simple exponential decay type except for the top section of the riser. To verify the gas bypassing from top bubbling beds to middle bubbling beds, $CO_2$ gas was injected by tracer gas in constant ratio, and then was measured $CO_2$ concentration in outlet gas by gas chromatography. Gas bypassing occurred below 2.6% which is negligible value.

• Geotechnical Engineering
• /
• v.11 no.2
• /
• pp.29-36
• /
• 1995

Load testis are executed on model reticulated root piles (RRP) to figure out the optimum slanting angle in the piles installation. One set of model RRP consists of 8 slanting piles which are installed in circular patterns forming two concentric circles, each of which is made by 4 piles. Each pile which is a steel bar of 5m in diameter and 300mm in length is coated to become a pile of 6.5mm in diameter. The slanting angle of the model RRP varies from 0$^{\circ}$ to 20$^{\circ}$ Comparing ultimate bearing capacities of the model RRP of different installation angles, it is observed that the ultimate capacities of the RRP increase as the installation angle increases until 15$^{\circ}$, and the optimum slanting angle of the RRP is around 15$^{\circ}$ The ultimate bearing capacity of the 15$^{\circ}$-RRP is found to be 22% bigger than that of the vertical RRP and 120% bigger than that of the circular surface footing whose diameter is same with the circle formed by outer root piles'heads. However, it is noticed that when the slanting angle of the RRP is increased over 15$^{\circ}$, the ultimate capacity starts to be reduced. The ultimate capacity of 20$^{\circ}$-RRP is even smaller than that of the vertical RRP by as much as 5%. From the observation of the load settlement curve obtained during the RRP load tests, it is known that as the slanting angle gets bigger the load -settlement behavior becomes more ductile.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2000

Preferential flow has recently been the subject of increasing interest because these phenomena contribute to solute transport in soils. Commonly, preferential flow paths are associated with macropores or highly structured soils. We presented an analysis of the measured breakthrough curves (BTCs) of $Cl^-$ and $Cu^{2+}$ ions to test the occurrence of preferential flow in soils using miscible displacement technique under steady flow conditions. We also analyzed soil water retention curves and from this curves induced cumulative pore size distribution of undisturbed soils, which sampled from Ap1, B1, and C horizons of Songjeong series soils (the fine loamy, mesic family of Typic Hapludults). In this study, miscible displacement experiment on C horizon was excluded, because it is structureless sandy loam with saturated hydraulic conductivity of $5.2cmhr^{-1}$. The saturated hydraulic conductivity of Ap1 horizon was $2.0cmhr^{-1}$, which was about 7 times higher than that of B1 horizon ($0.27cm hr^{-1}$). Cumulative pore size distribution predicted that Ap1 horizon had more macropores (pore diameter larger than $49{\mu}m$, equivalent to -6 kpa of soil matric potential) than B1 horizon. The hydrodynamic dispersion coefficient from chloride BTCs was estimated as $1.3cm^2hr^{-1}$ for B1 and $34cm^2hr^{-1}$ for Ap1 horizon. However the retardation factors of B1 and Ap1 horizon were significantly different, i.e. 1 and 0.6, respectively, which means that there was distinct partition between mobile water and immobile phase in Ap1 horizon. The copper retardation effect of Ap1 horizon was less than that of B1 horizon, even though cation exchange capacity of Ap1 horizon was higher than that of B1 horizon. Thus, breakthrough curves of $Cl^-$ and $Cu^{2+}$ obviously showed the probability that preferential flow would occur in Ap1 horizon.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.152-157
• /
• 2004

Physicochemical characteristics of rice milled by newly designed abrasive milling machine were studied. Crude protein and crude lipid contents were 7.81∼8.50% and 1.07∼0.95%, respectively, and they showed a tendency to decrease with milling times. However, they showed higher values than that of polished rice. Major fatty acids of crude lipid were palmitic acid, oleic acid, and linoleic acid. Whiteness of tested samples was higher than brown rice but lower than polished rice. The remain rate of rice germ of four pass-through and polished one time sample (FPS) was 39.33%, and it was higher than that of polished rice (4.00%). One thousand grain weight of samples over than three pass-through was significantly different from brown rice (p<0.05). FPS had smooth surface similar to polished rice and it showed some residual rice germ by scanning electron microscopy. Sensory evaluation showed that the taste of three pass-through rice, four pass-through rice, and FPS was not significantly different from polished rice, whereas their color, odor, texture, and overall acceptability had lower score than polished rice but higher than brown rice. Therefore, we estimate that rice ground over three pass-through by newly designed abrasive milling machine might be a good source having nutritive value.

• Journal of Korean Society of Forest Science
• /
• v.87 no.1
• /
• pp.90-97
• /
• 1998

This study was carried out to compare the characteristics of relative conductivity(RC) in the twenty-one deciduous broad-leaved species. The results obtained were summarized as follows : 1. The RC ranged from $3.18{\times}10^{-15}$ to $1.23{\times}10^{-10}m^2$ in deciduous broad-leaved species, and appeared different values in various portions of a tree and species. 2. In eight diffuse-porous species, the ranges of average RC were $3.49{\times}10^{-13}$ to $6.35{\times}10^{-11}m^2$ in stems. $4.89{\times}10^{-13}$ to $2.99{\times}10^{-11}m^2$ in branches, and $1.33{\times}10^{-13}$ to $9.42{\times}10^{-12}m^2$ in junction part between stem and branch. In thirteen ring-porous species, the RCs were $7.14{\times}10^{-13}$ to $4.76{\times}10^{-11}m^2$ in stems, $2.93{\times}10^{-13}$ to $3.91{\times}10^{-11}m^2$ in branches, and $1.14{\times}10^{-13}$ to $9.20{\times}10^{-12}m^2$ in junction part. 3. The RC and diameter of stem have no interrelation in eight diffuse-porous species. The RC of stem increased with decreasing diameter of stem in eleven ring-porous species except Fraxinus mandshurica and Maackia amurensis. 4. In five deciduous broad-leaved species, the RC of 1-year-old shoots(the leader and adjacent laterals ) ranged from $4.87{\times}10^{-13}$ to $8.41{\times}10^{-11}m^2$ in the leaders, and $7.93{\times}10^{-14}$ to $2.01{\times}10^{-11}m^2$ in the adjacent laterals. The RCs were much greater in the leaders than in the adjacent laterals because of the hydraulic dominance of the leader shoot.