• Title/Summary/Keyword: 수격

검색결과 116건 처리시간 0.025초

일본 급수장치의 구조 및 재질에 관한 기준

  • 한국상하수도협회
    • 한국상하수도협회지
    • /
    • 통권4호
    • /
    • pp.66-69
    • /
    • 2003
  • "급수장치"라 함은 수도사업자가 일반의 수요자에게 정수를 공급하기 위하여 설치한 배수관으로부터 분기하여 설치된 급수관, 계량기, 저수조, 수도전, 기타 급수에 관련된 기구를 말한다. 우리나라에서는 수도시설의 급수장치의 구조 및 재질에 대해 따로 정한 사항이 없고 수도법 시행령 제18조의2에서 정한바와 같이 일반적인 수도용 자재기준에 따르도록 규정하고 있다. 한편 일본의 경우를 살펴보면 급수장치가 갖추어야 될 구조 및 재질에 관한 사항을 수도법 시행령으로 규정하고 있고 수격한계, 유해물질의 침출성능 및 역류방지 등에 관한 품질특성치를 후생성령으로 정해 수도사업자의 급수의무에 대응하여 공급계약시 수용가의 준수사항을 상세히 규정하고 있다. 우리나라에서도 급수장치가 일반적인 수도용 자재와 구분되어 관리될 필요가 있다고 판단하고 우선 일본의 급수장치의 구조 및 재질에 관한 후생성령을 번안하여 수록하였다.

  • PDF

다양한 부정류 마찰항을 고려한 관망 천이류 모의와 실험연구 (Transient Analysis of Pipeline System Considering Unsteady Friction Models)

  • 장일;김상현;김지현
    • 상하수도학회지
    • /
    • 제22권6호
    • /
    • pp.657-664
    • /
    • 2008
  • This research compared several unsteady friction models for transient analysis of pipeline system. Unsteady friction is an important factor for accurate simulation of hydraulic transient. Steady friction, quasi-steady friction, Zielke's model and two versions of Brunone model were compared with measurement data of identical pipeline conditions. This study showed that the existing simple steady friction model can be useful for the safer design of pipeline system due to its overestimation of waterhammer, but introduction of more elaborate models are required for advanced analysis such as inverse transient analysis of friction or leakage and the preliminary analysis of water quality prediction of water distribution system.

크랙을 가진 밸브 배관계의 강제진동 특성 (Characteristics of Forced Vibration of Valve-pipe Systems with a Crack)

  • 손인수;김창호;조정래
    • 한국소음진동공학회논문집
    • /
    • 제22권11호
    • /
    • pp.1049-1056
    • /
    • 2012
  • The forced vibration response characteristics of a cracked pipe conveying fluid with a concentrated mass are investigated in this paper. Based on the Euler-Bernoulli beam theory, the equation of motion is derived by using Hamilton's principle. The effects of concentrated mass and fluid velocity on the forced vibration characteristics of a cracked pipe conveying fluid are studied. The deflection response is the mid-span deflection of a cracked pipe conveying fluid. As fluid velocity and crack depth are increased, the resonance frequency of the system is decreased. This study will contribute to the decision of optimum fluid velocity and crack detection for the valve-pipe systems.

수도관로 소수력발전설비에 수격작용으로 인한 고장대책 (Trouble and Measure Owing to Water-hammer in Small Hydropower Turbine System Of Waterpipe)

  • 이형묵;김기원;변일환;홍정조;이은웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
    • /
    • pp.671-672
    • /
    • 2006
  • Recently the development of small hydropower generation with using water pipes is revitalized by the water works facilities. However, when the tubine generator is in case of emergency stop by the internal and external accidents, it causes water hammer in water pipes and suspension of water supply. To prevent these problems of small hydropower generator, we has analyzed water supply patterns, installation position and water pipe systems.

  • PDF

축압기가 부착된 관로의 동특성 수치해석 (Numerical Analysis of the Dynamical Characteristics of Fluid Flow Inside a Pipe with an Accumulator)

  • 서용권
    • 설비공학논문집
    • /
    • 제13권5호
    • /
    • pp.388-397
    • /
    • 2001
  • This paper addresses characteristics of compressible flow dynamics inside a pipe with an accumulator and an inlet orifice. It also presents a simple but stable numerical method associated with the accumulator-orifice calculation. In particular, a focus is given to developing a method of finding an optimum design of the accumulator-orifice system (i.e., the accumulator size and the throttle resistance) that gives the most effective dissipation of the water-hammering problem. It is found that there exists indeed an optimum set of parameter values for the most effective dissipation of the wave energy.

  • PDF

폴리부틸렌 이중관에서의 워터 햄머 현상에 관한 연구 (The Study of Water Hammer in Polybutylene Double Piping System)

  • 김용봉;양찬모;이용화
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2005년도 동계학술발표대회 논문집
    • /
    • pp.511-516
    • /
    • 2005
  • This study is to investigate the pressure wave characteristics and the maximum pressure rise generated by instantaneous valve closure at the end of the straightening polybutylene double piping system with header. Experiments were conducted under the following conditions: initial pressure $1{\sim}5$ bar, flow velocity $0.5{\sim}3.0$ m/s and water temperature $25^{\circ}C$.

  • PDF

A Study on the Internal Composition for the Operating Mechanism of Heumgyeonggaknu(欽敬閣漏) -On the Internal Composition of Clepsydra and Jujeon(籌箭)-

  • Ham, Seon Young;Kim, Sang Hyuk;Kim, Yong-gi;Lee, Yong Sam
    • 천문학회보
    • /
    • 제41권1호
    • /
    • pp.51.3-51.3
    • /
    • 2016
  • 흠경각루(欽敬閣漏)는 1438년 장영실(蔣英實)이 제작한 수격식 천문시계이다. 흠경각루의 작동메커니즘은 물시계, 수차, 수차제어시스템, 기륜, 주전, 각종 기어 등이 유기적으로 작동하여 가산 위의 태양운행장치와 37명의 시보인형들을 움직이게 하는 것이다. 이 연구는 흠경각루의 작동 메커니즘에 따른 가산 내부의 공간구성에 관한 것이다. 특히, 흠경각루의 동력발생 장치 부분인 물시계와 수차의 위치, 시보대 위의 신호발생장치인 주전(籌箭)에 대하여 연구하였다. 주전은 시보인형들이 종, 북, 징을 타격하여 12시와 경점시간을 알리게 하는 신호를 주는 것이다. 이를 위해 흠경각루의 기륜을 움직이기 위해 필요한 물시계와 수차의 크기를 결정하였다. 또한 주전의 작동메커니즘에 대해 분석하고, 구체적인 주전의 형태를 3D 모델링으로 구현하였다.

  • PDF

공기실이 설치된 건축물 급수관로의 과도압력 특성 (Characteristics of the Transient Pressure in a Building Water Supply System with an Air Chamber)

  • 황희성;임기원;이광복;조병선;차동진
    • 설비공학논문집
    • /
    • 제12권8호
    • /
    • pp.782-790
    • /
    • 2000
  • A numerical study has been conducted to characterize the transient pressure in a building water supply system with an air chamber by utilizing a commercial code that employs the method of characteristics. Some results produced for the purpose of verification in the study agree quite well with the previously reported. Several parameters are then varied. Among them are the valve closure time, the wave speed, the static pressure, the polytropic exponent, the air chamber volume, the inner diameter and the shape of orifice in the air chamber, etc, while the water temperature and velocity are kept constant at $20^P{circ}C $,/TEX> and 0.8 m/s, respectively, Results reported in this parametric study may be useful to understand the unsteady behavior of the system.

  • PDF

수충격 완화용 공기 챔버의 설계 및 성능 예측에 관한 연구 (Design and Performance Prediction of an Air Chamber for Reduction of Water Hammering)

  • 강신형;류해성;박민서
    • 설비공학논문집
    • /
    • 제4권1호
    • /
    • pp.57-64
    • /
    • 1992
  • A computer program was developed for the prediction of transient flow in a water supply system. where an air chamber is installed to reduce the water hammering. The governing equations based on a characteristic method are solved using a finite difference method. A design process of an air chamber is shown in the present paper considering the effects of the initial air volume and the discharge coefficients of the orifice on the total volume and over-all performance of the chamber.

  • PDF

상수관망의 개선을 위한 우선순위 결정인자 (Determination indexes for the priority of improvement of water distribution system)

  • 권혁재
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2016년도 학술발표회
    • /
    • pp.523-523
    • /
    • 2016
  • 본 연구에서는 두 지역의 실제 상수관망에 대해서 부정류해석을 수행하였고 각각의 상수관망에 필요한 부정류피해 최소화방안을 제시하였다. 본 연구에서는 실제 도시 상수관망인 광탄 GT1-1 소블럭 상수관망을 대상으로 부정류해석을 수행하였고 신뢰성해석을 통하여 구역별 파괴 확률을 산정하였다. 또한 상수관망의 운영인자로써 물 사용량지수와 급수전지수, 사용연수지수, 수압지수, 사고이력지수를 개발하여 광탄 GT1-1 소블럭 상수관망의 운영지수에 의한 구역별 위험도를 분석하여 상대적으로 안전에 취약한 구역을 선정할 수 있었다. 광탄 GT1-1 소블럭 상수관망을 7개 구역으로 나누어서 신뢰성해석과 운영지수에 따른 위험도 분석을 수행하였고 상대적으로 수격압으로 인한 관로파괴에 취약한 구역을 선정할 수 있었다. 또한 광탄 GT1-1 소블럭 상수관망에서는 구역별 파괴확률과 운영지수에 따른 위험도 순위가 같게 나타났다. 본 연구에서 개발된 상수 관망의 신뢰성해석모형과 운영지수를 운영관리에 적용한다면 향후 개량이나 교체가 필요한 상수 관로의 우선순위 선정에 유용하게 사용될 것으로 판단된다.

  • PDF