• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.200-206
• /
• 2001

자동차의 심장부라고 할 수 있는 엔진의 설계 개발에 있어서 CAE(computer aided engineering)의 활용이 개발비용 및 기간 단축과 설계 품질의 향상에 효과적이며, CAE가 제품개발의 조기에 수행될 수록 그 효과가 큰 것으로 받아 지고 있다. (1) 한편, 컴퓨터 하드웨어와 소프트웨어의 발전으로, 설계 시에 컴퓨터의 이용이 크게 증가되고 있다. 특히, 솔리드 모델(solid model)을 기본으로 하는 설계와 이를 이용한 동시 공학의 도입은 해석과 그 결과의 설계 반영이 용이한 환경을 주고 있다. 따라서, 완성차 업체에서는 보다 신뢰성 있는 해석을 신속히 수행하기 위한 해석 기술의 개발과 CAE 적용 분야의 확대를 위해 노력하고 있다.(중략)

• Journal of the KSME
• /
• v.31 no.1
• /
• pp.34-42
• /
• 1991

복잡한 형상의 서지 탱크를 CAEDS의 GEOMOD를 이용하여 내부의 리보까지 포함한 용기를 모델링하였으며, 설계 부피를 검사하고 GEOMOD와 GFEM 사이의 직접 데이터 교환을 통하여 구조 해석에 필요한 유한요소를 만들었다. 유한요소법에 최적화 이론을 적용하여 서지탱크의 두께 변화에 따른 응력의 설계 민감도를 구하였으며, 민감도를 근거로 보강 위치 및 국부적인 용기의 두께를 결정하였다. 유한요소법 프로그램(IFES, GFEM)과 솔리드 모델러(GEOMOD), 그리고 최적화 기법(IFES-Optimization)을 모두 통합하여, 최적 설계를 수행함으로써 반복되는 실험에 의한 시간과 경비를 줄임과 동시에 신뢰성 있는 설계방법 및 방향을 제시하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.5
• /
• pp.403-412
• /
• 2022

As the 4th industrial revolution is in full swing and next-generation ICT(Information & Communications Technology) convergence technology is being developed, various smart construction technologies are being rapidly introduced in the construction field to respond to technological changes. In particular, since the earth-volume calculation process for site design accounts for a large part of the design cost at the construction site, related researches are being actively conducted to improve the efficiency of the process and accurately calculate the earth-volume. The purpose of this study is to present a method for quickly constructing the topography of a construction site in 3D and efficiently calculating earth-volume using the results. For this purpose, the construction site was constructed as a 3D realistic model using large-scale aerial photos obtained from UAV(Unmanned Aerial Vehicle). At this time, since the constructed 3D realistic model has a surface model structure in which volume calculation is impossible, the structure was converted into a 3D solid model to enable volume calculation. And we devised a methodology to calculate earth-volume based on CAD(Computer-Aided Design and Drafting) using the converted solid model. Automatically calculating earth-volume from the solid model by applying the method. As a result, It was possible to confirm a relative deviation of 1.52% from the calculated earth-volume from the existing survey results. In addition, as a result of comparative analysis of the process time required for each method, it was confirmed that the time required is reduced of 60%. The technique presented in this study is expected to be utilized as a technology for smart construction management, such as periodic site monitoring throughout the entire construction process, as well as cost reduction for earth-volume calculation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.8-11
• /
• 2002

In this study, Automatic design program creates 3D solid models and constructs them. The method of making assembly model is two. One assembles the element made in automatic design program with hand, the other develops the automatic design program for creating assembly model. Automatic design program improves the convenience of user. In creating gears, involute ewe and Trochoidal fillet curve are made by mathematical development.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.12
• /
• pp.236-243
• /
• 1998

퍼지 이론과 계산기하학적 수법에 의한 자동요소 생성법, 해석코드 및 상용 솔리드 모델러를 유기적으로 통합한 자동화된 설계시스템을 개발하였다. 본 시스템은 여러 가지 복합현상과 관련된 실제 구조물에 대한 설계기능을 갖고 있다. 정전장 해석, 변형해석 및 모드해석 등과 같은 해석하고자 하는 물리적인 현상에 의존한 형상모델이 자동적으로 유한요소모델로 변환되어 해석을 수행한다. 또한 신경망의 기능을 도입, 통합시킴으로써 설계해의 영역을 유용하게 제시하여 준다. 개발한 시스템은 정전 마이크로머쉰의 성능 평가에 적용하여 그 효용성을 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.64-73
• /
• 1997

솔리드 모델러, 자동요소분할 기법, 4면체 특이요소, 응력확대계수의 해석 기능을 통합하여, 3차원 균열의 응력확대계수를 효율적으로 해석할 수 있는 시스템을 개발하였다. 균열을 포함하는 기하모델을 CAD 시스템을 이용하여 정의하고, 경계조건과 재료 물성치 및 절점밀도 분포를 기하모델에 직접 지정함으로써, 퍼지이론 에 의한 절점발생과 데로우니 삼각화법에 의한 요소가 자동으로 생성된다. 특히, 균열 근방에는 4면체 2차 특이요소를 생성시켰으며, 유한요소 해석을 위한 입력 데이터가 자동으로 작성되어 해석코드에 의한 응력 해석이 수행된다. 해석 후, 출력되는 변위를 이용하여 변위외삽법에 의한 응력확대계수가 자동적으로 계산되어 진다. 본 시스템의 효용성을 확인하기 위해, 인장력을 받는 평판내의 표면균열에 대해 해석하여 보았다.

• IE interfaces
• /
• v.8 no.3
• /
• pp.141-153
• /
• 1995

기존의 솔리드 모델링 시스템은 형상 표현에 있어서의 제약성과 통합 시스템으로서의 폐쇄성으로 인하여 응용 범위에 제약이 따른다. 이러한 약점을 극복하고자 하는 노력의 일환으로서, 최근에 등장한 것이 비다양체 모델을 지원하는 CAD 시스템 커널이다. 본 논문에서는 이러한 비다양체 모델을 지원할 수 있는 모델링 커널 시스템 개발의 기초가 되는 비다양체 자료구조와 이것을 바탕으로 한 오일러 공식 및 오일러 작업에 대해 소개한다. 그리고 이러한 오일러 작업을 실제로 구현하여 모델링 작업을 수행해 봄으로써, 본 논문에서는 제안된 비다양체 자료구조와 오일러 작업의 유용성을 보인다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.501-514
• /
• 2015

Earthwork is a basic operation for all forms of civil works and affects construction time, cost and productivity. It is a mechanized operation that needs various construction equipment as a group and uses a lot of fuel for construction equipment. But, the problem is that earthwork operation is usually performed by equipment operator's heuristic and intuition, which can cause low productivity, high fuel consumption, and high carbon dioxide emission. As one of solutions for this problem, the fleet management system for construction equipment is suggested for effective earthwork planning, optimal equipment allocation, efficient machine operation, fast information exchange, and so forth. The purpose of this research is to suggest core methods for developing the equipment fleet management system. The methods include 3D solid parametric model generation, soil distribution using Cctree data structure, equipment fleet construction and equipment fleet operation. A simulation test is performed to verify the effectiveness of the equipment fleet management system in terms of equipment operating ratio, fuel usage, and $CO_2$ emission.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.6
• /
• pp.557-564
• /
• 2014

In this study, we present an algorithm that conducts an unique naming process for the bridge object through the solid object identification focused on 3D straight bridge model. For the recognition of 3D objects, the numerical algorithm utilizes centroid point, and solid object on the local coordination system. It classifies the object feature set by classifying the objects and members based on the bridge direction. By doing so, unique names, which contain the information about span, members and order of the object, were determined and the suitability of this naming algorithm was examined through a truss bridge model and a bridge model with different coordinate systems. Also, the naming process based on the object feature set was carried out for the real 3D bridge model and then was applied to the module on local server and mobile device for real bridge inspection work. From the comparison of the developed naming algorithm based on object identification and the conventional one based on field inspection, it was shown that the conventional field inspection work can be effectively improved.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.72-81
• /
• 2024

Purpose: This study aimed to assess the marginal and internal fit of 3-unit monolithic zirconia fixed partial dentures (FPDs) fabricated via computer-aided design and computer-aided manufacturing (CAD/CAM) from solid working casts and removable die system. Materials and Methods: The tooth preparation protocol for a zirconia crown was executed on the mandibular right first premolar and mandibular right first molar, with the creation of a reference cast featuring an absent mandibular right second premolar. The reference cast was duplicated using polyvinyl siloxane impression, from which 20 working casts were fabricated following typical dental laboratory procedures. For comparative analysis, 10 FPDs were produced from a removable die system (RD group) and the remaining 10 FPDs from the solid working casts (S group). The casts were digitized using a dental desktop scanner to establish virtual casts and design the FPDs using CAD. The definitive 3-unit monolithic zirconia FPDs were fabricated via a CAM milling process. The seated FPDs on the reference cast underwent digital evaluation for marginal and internal fit. The Mann-Whitney U test was applied for statistical comparison between the two groups (α = 0.05). Results: The RD group showed significantly higher discrepancies in fit for both premolars and molars compared to the S group (P < 0.05), particularly in terms of marginal and occlusal gaps. Color mapping also highlighted more significant deviations in the RD group, especially in the marginal and occlusal regions. Conclusion: The study found that the discrepancies in marginal and occlusal fits of 3-unit monolithic zirconia FPDs were primarily associated with those fabricated using the removable die system. This indicates the significant impact of the fabrication method on the accuracy of FPDs.