• Korean journal of applied entomology
• /
• v.46 no.2
• /
• pp.175-182
• /
• 2007

Two fruit moths of the oriental fruit moth, Grapholita molesta (Busck), and the peach fruit moth, Carposina sasakii (Matsumura), infest apples in Korea by internally feeding behavior. C. sasakii is a quarantine insect pest from some other countries importing Korean apples. G. molesta is not a quarantine insect pest, but can be incorrectly identified as C. sasakii especially when it is found inside apple fruits at its larval stages because it is not easy to identify the two species by morphological characters alone. This incomplete identification results in massive economical loss by fruits needlessly destroyed or turned away at border inspection stations of the importing nations. This difficulty can be overcome by molecular DNA markers. Several polymorphic regions of mitochondrial DNA of both species were sequenced and used for developing specific striction sites and polymerase chain reaction (PCR) primers. Based on these sequences, three diagnostic PCR-restriction fragment length polymorphism (RFLP) sites were detected and validated for their practical uses. Also, species-specific PCR primers were devised to develop diagnostic PCR method for identifying the internal feeders.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.2
• /
• pp.201-210
• /
• 2018

In this study, we formulated oil-in-water emulsion composition for skin care products containing jadeite powder which is well known as far-infrared radiating material. Jadeite powder could sustain stable dispersion in aqueous solvents over a month and this helped mixing it high content in oil-in-water emulsion formulation. To identify the effect of jadeite as a far-infrared radiator materials relating to the skin surface temperature change, we applied emulsion formulation containing 2 weight percent jadeite powder onto facial skin surface and blank formulation together and analyzed surface temperature with thermo-vision. Our results showed that the temperature difference between jadeite powder formulation applied region and blank formulation reached to 1.5 ~ 2.0 degree Celsius. We also performed same test with nephrite powder and titanium dioxide powder but only jadeite powder containing formulation showed significant skin temperature change. To elucidate main cause of heat energy transfer, we tested heat radiation, energy dispersive spectrometer analysis and measured far infrared radiance emissivity, diffuse reflectance spectra and water evaporation rate. We found out jadeite powder could retard water evaporation effectively from the skin surface and resist temperature drop down. This is because of the innate chemical composition and surface structure of jadeite, which can bind with water molecules to form hydrogen bonds. It is concluded that we can develop novel skin care products for moisturizing and thermos with jadeite powder.

• Clean Technology
• /
• v.14 no.3
• /
• pp.176-183
• /
• 2008

The purpose of this study is to upgrade the catalysts for synthesizing mixed octenes using normal butene and the catalysts for synthesizing $C_9$-aldehyde through hydroformylation of mixed octenes with syngas. The in-line activation method with circulating activating solution was effective for activation of the $NiO/A1_{2}O_3$ catalyst. The reason for catalyst deactivation may be ascribed to physi-sorbed materials or oligomers which block pore entrance and then prevent active sites from participating a reaction. Continuous distillation apparatus was used for separating mixed octenes from dimerization products. When reflux ratio was above 3 : 1, mixed octene fraction of which purity was above 99.57% was obtained. In $C_9$-aldehyde synthesis through hydroformylation of mixed octenes, we investigated a performance of ligand which increased catalyst stability as well as activity of Co catalyst. The results indicated that TPPO, NMP, NDMA, and succinonitrile were suitable ligand for increasing initial activity and reducing loss of Co during catalyst recovery.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.20.1-20.1
• /
• 2009

반도체 소자 제조 공정 프로그램인 T-suprem4와 MEDICI를 이용하여 NMOS구조를 설계 하였다. MOS 소자 시뮬레이션을 통해 식각 공정에서 생기는 언더컷에 의한 전기적 특성을 I-V 곡선으로 비교하여 분석하였다. NMOS 구조는 반도체 소자 제조 공정 프로그램 T-suprem4를 이용하여 기본 소자 구조를 설계하였다. 실험의 변수로는 첫째, 소자 공정 중 폴리 실리콘의 언더컷 식각의 각도를 $70^{\circ}C$부터 $110^{\circ}C$까지 $10^{\circ}C$의 차이로 설계하였다. 또한, 언더컷에 의한 드레인-소스사이의 전류($I_{DS}$) 손실이 없는 유효한 각도를 확인하기 위해 $80^{\circ}C$부터 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 설계 하였다. 둘째, 게이트 크기를 축소하고 역시 언더컷 식각의 각도를 다양하게 설계하였다. 설계된 소자를 반도체 소자 특성 분석 프로그램 MEDICI를 이용하여 소자의 전기적 특성을 측정하였다. 우선 NMOS소자 게이트에 2V의 전압을 인가하였다. 그리고 드레인 부분에 전압을 인가하여 그에 따른 드레인의 전류를 측정 하였다. 드레인 전압은 0V 부터 변화시키며 인가하였다. 측정된 전류 값으로 I-V 곡선을 나타내었다. I-V 곡선의 분석을 통해 식각 후 언더컷의 각도가 $70^{\circ}C$, $80^{\circ}C$, $110^{\circ}C$ 일 때 $4\times10^{-8}A/{\mu}$의 전류가 흐르고, $90^{\circ}C$, $100^{\circ}C$ 일 때는 $1.8\times10^{-7}A/{\mu}$의 전류가 흐르는 것을 확인 하였다. $80^{\circ}C$에서 $100^{\circ}C$까지는 $2^{\circ}C$ 크기로 측정한 결과 $88^{\circ}C$에서 $100^{\circ}C$ 사이 일 때 $90^{\circ}C$ 각도의 경우와 같이 $1.8\times10^{-7}A/{\mu}$의 전류가 측정 되었다. 즉, 식각 중 수직 측벽 도에 언더컷이 $10^{\circ}C$이상 발생하면 $I_{DS}$ 전류 값이 약 22%로 감소하였다. 또한 일반적으로 $90^{\circ}C$의 수직측벽을 가지는 공정이 중요하다고만 생각 되었지만, 이번 연구를 통하여 식각 후 측벽의 각도가 $88^{\circ}C$에서 $92^{\circ}C$ 사이에 있을 때 $I_{DS}$ 값이 가장 최대가 되는 것을 확인 할 수 있었다.

• Geophysics and Geophysical Exploration
• /
• v.14 no.3
• /
• pp.227-233
• /
• 2011

Attention has been focused on geothermal energy as an alternative energy because it is continuously operable without external supply. Most of geothermal anomalies in Korea are related to deep circulation of groundwater through a fracture system in granite area. Therefore it is very important to understand the distribution of the fracture system which is the main channel of ground water. In this research, we constructed the velocity models with a fracture system and the layered sediments, respectively, and generated synthetic data sets with them to verify the presented vertical seismic profiling (VSP) preprocessing scheme. We compared the results from conventional VSP preprocessing flow to those from VSP preprocessing flow considering fracture system. We noticed that the preprocessing flow considering fracture system retains more sufficient signal including down-going wave than conventional preprocessing. In addition, we applied 3D VSP prestack phase screen migration to the preprocessed reversed VSP (RVSP) data from Seokmo Island so that we were able to image fracture structure of the geothermal site in Seokmo Island.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1017-1028
• /
• 2006

Japanese railroad companies continued growing by developing diversification based on a railroad enterprise. However, after entering in the 1990s, the diversification model of a railroad company reached the management limit. Under economic depression, A decrease in the birthrate and aging progressed and passenger transport changed to the downward tendency. Nevertheless, since railroad investment was expanded, railroad achievements got worse and price competitiveness with JR East Japan became weak. But the achievements of a diversification section got worse compared with the railroad enterprise. Therefore, group management was thought as important and enterprise reorganization was developed.

• Fire Science and Engineering
• /
• v.34 no.3
• /
• pp.76-84
• /
• 2020

Most outlet fires occur around plug pins and plug pin receivers. However, no research has been conducted on ignitions at power connection points. This study confirms the possibility of ignition after incomplete connection, using a stranded wire, to the power connection point of an outlet. The experiment was divided into basic and reproducing experiments. The basic experiment confirmed the possibility of ignition according to the number of wire strands connected to the power connection point, and it identified the characteristics of the residue after the fire. In the reproducing experiment, lamps, vacuum cleaners, and heaters were connected to an outlet to check if the ignition at the connection advanced into a fire. The fire advanced due to the heat and arc generated at the connection point, and partial losses were identified in the U-type holder and clip. Accordingly, the results demonstrate that a fire may occur when the stranded wire is incompletely connected to the outlet. Moreover, it was confirmed that the cause of a fire can be determined based on the characteristics of the residue.

• Korean Journal of Food Science and Technology
• /
• v.31 no.6
• /
• pp.1604-1612
• /
• 1999

The study was carried out to investigate the quality of the wet noodle added with the powders of nopal and nopalitos from Opuntia ficus-indica. The wet noodles were prepared to the ratio of 3, 6 and 9% (w/w) of the nopal and the nopalitos based on a flour weight. The initial pasting temperature and final viscosity in an amylograph decreased as the increase of the nopal and the nopalitos powders. A cooked weight and volume decreased with the increase of the nopal and the nopalitos powders, while a cooking loss increased. From the sensory evaluation, the wet noodles included 3% nopalitos and 6% nopal powders were similarly evaluated as the noodle used whole wheat flour. Bacterial counts of wet noodle with the nopal and the nopalitos powders were always lower than those of the control. Bacterial counts of wet noodle slowly increased as the increase of the amount of nopal and the nopalitos powders during storage at $4^{\circ}C\;and\;20^{\circ}C$. The methanol extracts from the nopal showed antimicrobial activities against Escherichia coli, Escherichia coli O157 : H7, Salmonella typhimurium, and Bacillus subtilis, while the extracts from the nopalitos showed antimicrobial activity only against Escherichia coli.

• Journal of the Korea Convergence Society
• /
• v.8 no.6
• /
• pp.29-36
• /
• 2017

In this paper, we propose a method for generating improved saliency map by learning multiple features to improve the accuracy and reliability of saliency map which has similar result to human visual perception type. In order to overcome the inaccurate result of reverse selection or partial loss in color based salient area estimation in existing salience map generation, the proposed method generates multi feature data based on learning. The features to be considered in the image are analyzed through the process of distinguishing the color pattern and the region having the specificity in the original image, and the learning data is composed by the combination of the similar protrusion area definition and the specificity area using the LAB color space based color analysis. After combining the training data with the extrinsic information obtained from low level features such as frequency, color, and focus information, we reconstructed the final saliency map to minimize the inaccurate saliency area. For the experiment, we compared the ground truth image with the experimental results and obtained the precision-recall value.

• Journal of the Korea Concrete Institute
• /
• v.20 no.2
• /
• pp.231-237
• /
• 2008

This study was performed to evaluate joint behavior of prestressed concrete(PSC)-steel mixed girders through the flexural test of 14 beams according to embedded length, amount of reinforcing steel, stud arrangement, and prestressing force. All test beams were failed by turns of desertion of reinforcing steel, stud, and steel plate. From test results, prestressing force was more effective on performance of connection than stud arrangement and reinforcing steel. And the spacing of stud is also more effective than embedding length. This paper also presented 3D nonlinear analysis considering the slip of composite section as well as the static load tests of PSC-steel mixed girders. According to the slip modulus, the nonlinear analysis showed that the behavior of hybrid girders could be divided into three parts as full-composite, partial-composite and non-composite. However, the experimental results showed that the PSC-steel hybrid girders with shear connectors took the part of partial composite action in ultimate load stage. In addition, it was founded that stud shear connectors and welded reinforcements were contributed to improve the ultimate strength of hybrid girders for about 20%.