• Journal of Korean Association for Spatial Structures
• /
• v.9 no.3
• /
• pp.93-100
• /
• 2009

As interest in latest cultural heritance is increased, an importance about conservation of dilapidated cultural building asset is risen. Most of cultural building asset used wood by main material and conservation repair about corrosion and damage by deterioration of these cultural building asset considers cultural value of member and the basis principle is the archetype maintenance. Accordingly, conservation processing method that use synthetic is embossed. This paper experimented with reinforcement sectional area ratio, direction of section, length, strength of synthetic resins as variable and manufactures total 14 specimens as experimental study about compression reinforcement performance of circular section wood that strengthen by synthetic resins. The result of this paper has shown that adequate strengthen is more efficient than new member and the most important authenticity in strengthen and repair of cultural heritance can be ensured.

• Journal of Korea Water Resources Association
• /
• v.53 no.3
• /
• pp.167-179
• /
• 2020

Recently, new levee material has been developed to enhance natural soil strength and vegetation growth using biopolymer. In the study, critical tractive force of vegetated mats mixed with biopolymer mixed soil has been evaluated to apply the mixed soil to levee construction material. The mixed soil has been produced by mixing beta-glucan, clay, and sand. Full scale test bodies have been constructed with 3 cm thick of the mixed soil. Total 4 test bodies have been constructed and experimented. Critical tractive forces have been evaluated by observation and measurement of failure conditions and soil loss. Although performance of the vegetated revetments are affected by vegetation coverage conditions, the critical tractive forces are shown about 40 N/㎡ and the critical velocities are shown about 4 m/sec by full scale experiment. Erosion resistance is also enhanced by combination of root and net with mat materials.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6289-6295
• /
• 2014

Rework systems are the equipment used to install or remove semiconductor chips with BGA or SMD forms in printed circuit boards. The rework systems have hot air outlets. At the outlets, precise temperature control is needed to avoid heat shock. The aim of this paper was to suggest a new controller for temperature control at the hot air outlets. The suggested controller was a fuzzy PID controller. The fuzzy PID controllers were composed of TSK fuzzy rules and had outstanding ability for nonlinear systems control. This paper reports the design algorithm of fuzzy PID controllers, and the design process of the fuzzy PID controller for the temperature control of the outlets. Temperature control experiments were performed to verify the ability of the suggested controller. As a result, the RMS of the proposed method is 9.44 and the general method is 15.88. The experiments showed that the temperatures at the outlet using the suggested fuzzy PID controller followed the desired ones better than the commonly used PID controller.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.194-194
• /
• 2023

세류침식은 급경사 나지사면에서 증가하는 지표흐름에 의해 빈번하게 발생하고, 과도한 토사유출로 인해 홍수 및 토사재해 위험 증가와 수질오염 등의 문제를 야기한다. 본 연구는 개발지역의 마사토를 활용하여 1.2 m × 5.5 m 규모의 3개 중규모 플롯에서 세류발달 특성, 유출 및 토사유출량을 파악하고자 강우와 유입수 모의실험을 수행하였다. 경사 조건 15°와 20°에서 유입수 유무에 따른 4회의 반복실험이 진행되었으며 마사토의 평균입경은 0.89 mm이다. 강우강도 범위는 90~140 mm/hr이며, 유입수 유량은 합리식으로 계산하였으며 100~130 ml/sec이다. 하천 차수분석방법인 Horton방법을 사용하여 세류별 차수를 나누었다. 세류절개는 유입수가 없는 경우 실험 시작 약 1분 후에 발생하였고, 최대 2차수까지 세류가 발달하였으며, 유입수가 있는 경우 약 30초 후 발생하였고, 최대 3차수까지 세류가 발달하였다. 세류발달에 대한 수리학적 특성을 파악하기 위하여 염료 추적방법에 의한 동영상 이미지 분석결과 유속은 0.06~0.43 m/s의 범위를 보였다. 유입수와 강우가 함께 공급되는 경우 강우모의 공급수량에 비해 1.32~1.69배 증가했고, 이에 따라 지표유출수는 1.13~3.93배로 증가폭의 범위가 넓었다. 세류발달에 의한 토사유출량은 유입수 유무에 따라 6.7~32.3배로 증가하였다. 결론적으로 강우와 유입수가 상호작용하는 경우 강우에 의한 박리현상보다 유입수에 의한 측벽붕괴 활동이 활발하게 진행되었고 이는 세류 발달 과정에서 지배적으로 이루어졌기 때문으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.5-5
• /
• 2021

최근 기후변화로 인해 예측이 어려운 국지성 호우가 빈번하게 발생하고 있다. 국지성 호우는 대량의 홍수를 일으키고 산사태와 유송잡물을 동반한 흐름을 야기할 수 있으며 이로 말미암아 인근의 초목과 식생들로부터 유목(driftwood)이 발생하기도 한다. 유목이 흐름과 함께 떠내려 오게 되면 그로 인한 운동에너지가 크게 발생하게 되며, 수공구조물과 주택가옥 등에 충돌시, 순수한 수류의 충돌보다 훨씬 큰 손상을 주기도 한다. 또한 유목이 수공구조물 인근 하상에 군집하면 통수능을 저하시키기도 하며 식생효과와 마찬가지로 유목주변으로 유속이 증가하면서 세굴현상이 발생하게 되는데, 이는 하상저하를 일으키며 수공구조물의 안정성에 지속적으로 피해를 줄 수 있다. 특히 군집된 유목들이 교각에 충격을 주면 흐름방향으로 교각에 작용하는 외력을 증가시키게 되고 군집된 유목들이 다른 유목들을 연쇄적으로 포착하는 동시에 흐름을 지속적으로 방해하여 수위상승을 야기하게 된다. 이는 유목주변으로 세굴을 발생시켜 교량의 붕괴를 촉진시킬 수 있다. 일본의 경우에는 대부분의 하천유역의 경사가 매우 급하기 때문에 홍수발생시 산사태와 유송잡물들이 빈번하게 발생하고 있다. 그에 따라 대량의 유목들이 하천으로 유입되어 하천의 수공구조물과 주거지역에 심각한 피해를 주는 경우도 많다. 따라서 유목의 거동과 군집현상을 이해하여 사전에 유목거동의 예측과 유목과 하상변동의 상호작용 분석을 통해 유목에 의한 수리구조물 피해를 예측하는 연구들이 필요할 것으로 판단된다. 본 연구는 유목의 거동과 군집양상을 예측분석하기 위해 유목과 흐름의 이동상 실내실험과 수치해석을 수행하여 유목유입량에 따른 하상변동과 유목의 하상퇴적양상 및 다양한 거동을 관측분석 하였다. 특히, 유목간의 상호충돌과 측벽충돌을 고려하는 수치모듈을 유목동역학모형에 적용하여 수치해석을 수행하였다. 이를 통해 이동상 하상에서의 유목의 군집과정을 분석하고 수치해석의 한계와 개선사항들을 논의하였다.

• Journal of Korea Water Resources Association
• /
• v.56 no.7
• /
• pp.431-438
• /
• 2023

Many shorelines are facing the beach erosion. Considering the climate change and the increment of coastal population, the erosion problem could be accelerated. To address this issue, developing a sediment transport model for rapidly predicting terrain change is crucial. In this study, a sediment transport model based on GPU parallel arithmetic was introduced, and it was supposed to simulate the terrain change well with a higher computing speed compared to the CPU based model. We also aim to investigate the model performance and the GPU computational efficiency. We applied several dam break cases to verified model, and we found that the simulated results were close to the observed results. The computational efficiency of GPU was defined by comparing operation time of CPU based model, and it showed that the GPU based model were more efficient than the CPU based model.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.3
• /
• pp.175-185
• /
• 2000

This paper described on a basic study to organize fishing vessel control system in order to control efficiently fishing vessel in Korean offshore. It was digitalized ARPA image on the fishing processing of a fleet of purse seiner in conducting fishing operation at Cheju offshore in Korea as a digital camera and then simulated by used VTMS. Futhermore, it was investigated on the application of FVTMS which can control efficiently fishing vessels in fishing ground. The results obtained were as follows ; (1) It was taken 16 minutes and 35 minutes to casting and hauling net in fishing processing respectively. The length of rope pulled by scout boat was 200m, tactical diameter in casting net was 340.8m, turning speed was 6kts as well. (2) The processing of casting and hauling net was moved to SW, NE as results of simulation when the current direction and speed set into NE, 2kts and SW, 2kts respectively. Such as these results suggest that can predict to control the fishing vessel previously with information of fishing ground, fishery and ship's maneuvering, etc. (3) The control range of VTMS radar used in simulation was about 16 miles. Although converting from a radar of the control vessel to another one, it was continuously acquired for the vector and the target data. The optimum control position could be determined by measuring and analyzing to distance and direction between the control vessel and the fleet of fishing vessel. (4) The FVTMS(fishing vessel traffic management services) model was suggested that fishing vessels received fishing conditions and safety navigation information can operate safely and efficiently.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Radiation Oncology Journal
• /
• v.23 no.3
• /
• pp.186-193
• /
• 2005

Purpose: To improve the management of a medical linear accelerator, the records of operational failures of a Varian CL2l00C over a ten year period were retrospectively analyzed. Materials and Methods: The failures were classified according to the involved functional subunits, with each class rated Into one of three levels depending on the operational conditions. The relationships between the failure rate and working ratio and between the failure rate and outside temperature were investigated. In addition, the average life time of the main part and the operating efficiency over the last 4 years were analyzed. Results: Among the recorded failures (total 587 failures), the most frequent failure was observed in the parts related with the collimation system, including the monitor chamber, which accounted for $20\%$ of all failures. With regard to the operational conditions, 2nd level of failures, which temporally interrupted treatments, were the most frequent. Third level of failures, which interrupted treatment for more than several hours, were mostly caused by the accelerating subunit. The number of failures was increased with number of treatments and operating time. The average life-times of the Klystron and Thyratron became shorter as the working ratio increased, and were 42 and $83\%$ of the expected values, respectively. The operating efficiency was maintained at $95\%$ or higher, but this value slightly decreased. There was no significant correlation between the number of failures and the outside temperature. Conclusion: The maintenance of detailed equipment problems and failures records over a long period of time can provide good knowledge of equipment function as well as the capability of predicting future failure. Wore rigorous equipment maintenance Is required for old medical linear accelerators for the advanced avoidance of serious failure and to improve the qualify of patient treatment.

• Journal of Conservation Science
• /
• v.29 no.1
• /
• pp.47-54
• /
• 2013

The following study tests for the effects of mordants on the production of restoration papers during the conservation process of damaged paper artifacts. For this, four different types of synthetic mordants that are being marketed currently ($K_2CO_3$, $AlK(SO_4)_2{\cdot}12H_2O$, $Cu_2SO_4{\cdot}5H_2O$, $FeSO_4$) were selected to produce samples for measuring variable properties through artificial degradation. The research conducts tests for changes in color, tensile index, and pH level (degree of acidity). The results for changes in color have shown that the value of ${\Delta}E^*ab$ of $K_2CO_3$ mordant sample was the highest, and the tests for tensile index have shown that the strength of dyeing sample was decreased in accordance with the aging time, but Changes according to the mordant was not evident. Finally, the findings for pH level have shown that samples with $Cu_2SO_4{\cdot}5H_2O$ and $FeSO_4$ have pH levels drop below 6. As a result, the research have concluded that mordants used for dyeing restoration paper were identified to have an affect in the dyeing and aging characteristics of the paper.