고에너지 이온주입(1)에 기인한 격자 손상 발생 및 열처리에 따라 이들의 회복이 어느정도 가능한지에 대하여 측정 및 분석방법을 통하여 조사하였다. 그리고 본 실험에서는 이온주입시 형성되는 빈자리 결함(Vacancy defect)과 격자간 결함(interstitial defect)의 재결할(recombination)을 이용 점결합(point defect)를 감소 시킬 수 있는 effective RTA조건을 설정하여 well 특성을 개선하고자 하였다. 8inch p-type Si(100)기판에 pad oxide 100A을 형성한 후 NMOS 형성하기 위해 vtn${\sim}$p-well과 PMOS 형성을 위해 vtp$\sim$n-well을 이온주입 하였다. Mev damage anneal은 RTA(2)(Rapid Thermal Anneal)로 $1000\sim1150C$ 온도에서 $15\sim60$초간 spilt 하여 실험후 suprem-4 simulation data를 이용하여 실제 SIMS측정 분석결과를 비교하였으며 이온주입에 의해 발생된 격자손상이 열처리후 damage 정도를 알아보기 위해 T.W(Therma-Wave)을 이용하였으며 열처리후 면저항값은 4-point probe를 사용하였다. 이온주입후 열처리 전,후에 따른 불순물 분포를 SIMS(Secondary ion Mass Spectrometry)를 이용하여 살펴보았다. SIMS 결과로는 열처리 온도 및 시간의 증가에 따라서 dopant확산 및 활성화는 큰차이는 보이지 않고 오히려 감소하는 경향을 볼 수 있으며 또한 접합깊이와 농도가 약간 낮아지는 것을 볼 수 있었다. 결점(defect)을 감소시키기 위해서 diffusivity가 빠른 임계온도영역($1150^{\circ}C$-60sec)에서 RTA를 실시하여 dopant확산을 억제하고 점결점(point defect)의 재결합(recombination)을 이용하여 전위 (dislocation)밀도를 감소시켜 이온주입 Damage 및 면저항을 감소 시켰다. 이와 같은 특성을 process simulation(3)(silvaco)을 통하여 비교검토 하였다.
Background: The purpose of this study was to evaluate the relationship between variable factors and clinical results following the operative treatment of the tibial plateau fractures. Materials and Methods: The clinical and radiological analysis was performed on 29 cases of the tibial plateau fractures who had been treated with operative treatment and followed up for more than 1 year from January 1991 to December 1997. The analysis of clinical results was performed dividing into age, cause of injury, fracture type of Schatzker classification, associated soft tissue injury and method of operative treatment. Results: According to Schatzker classification, 2 cases(6.9%) were type I, 11 cases(37.9%) were type II, 1 case(3.5%) was type III, 5 cases(17.2%) were type IV, 4 cases(13.8%) were type V, and 6 cases(20.7%) were type VI. In all cases, bony unions were obtained. According to Blokker evaluation, 23 cases(79.3%) of 29 cases were acceptable. Conclusion: We could expect good clinical results if early knee joint mobilization following minimal invasive open reduction and internal fixation could be obtained. Bad clinical results were related with young age group under 30, more than Schatzker classification type IV of high energy trauma and associated injury of anterior cruciated ligment or meniscus.
노즐에서 분사되는 제트의 거동에 대해 전반적으로 고찰해보고, 실제 후판의 레이저 절단성 실험 을 통해 노즐의 영향 및 혼합가스의 절단면 질 향상효과 등을 살펴보았다. 간략히 요약하면 다음 과 같다. 아음속제트는 노즐압력을 증가함에 따라 절단압력도 증가하지만 노즐과 재료사이의 거 리를 가능한 작게 유지하여야 하는 제약이 있다. 따라서 사용중에 손상이 가기 쉽다. 이를 해결하 고자 초음속제트의 사용이 연구되고 있지만 shock의 형성으로 인해 노즐압과 절단압은 매우 비선 형적인 관계를 갖는다. 따라서 (i)고압에서도 MSD가 형성되지 않고 주기적인 압력 재상승이 나 타나도록 하거나, (ii)Laval노즐을 이용해 shock구조가 형성되지 않고 큰 절단거리를 얻도록 하는 방법이 제시되고 있다. 초음속노즐의 후판 절단 적용 가능성을 분석해 본 결과 유동 박리 현상으 로 인해 후판보다는 박판의 향상을 위해서는 적절한 조성의 혼합가스를 사용하는 것이 아주 효과 적이었으며, 보조 가수 제트를 채용해 slag제거를 효율적으로 수행 할 수 있음을 확인하였다.
Kim, Hyon-Soo;Kang, Hyeong-Min;Jung, Sang-Sun;Kim, Seung-Kon;Cho, Sang-Ho
Explosives and Blasting
/
v.31
no.2
/
pp.6-13
/
2013
Recently, complaints or environmental problems caused by the noise and dust generated from crusher of the mine and quarry are emerging. Therefore mining facilities such as crushers and mills have been installed in an underground. In order to facilitate crusher equipments in the underground, excavation of large space is required and then the stability of the large space underground structure is an important issue. In this study, the blast experiments, which use a block of the limestone, are performed. Based on the blast experiments, the numerical model was prepared and simulated using dynamic fracture process analysis code(DFPA) with considering the rising time of applied borehole pressure and microscopic tensile strength variation. Comparing the non-dimensional crack length and no-dimensional tensile strength obtained from blast experiments and numerical analyses, the input parameters of DFPA code for predicting a radial tensile crack in limestone blasting were determined.
Park, Sun Hee;Min, Jae Hong;Lee, Tae-Ho;Wi, Myung-Hwan
Korean Chemical Engineering Research
/
v.54
no.6
/
pp.863-870
/
2016
We investigated the physical/chemical phenomena that a slow loss of $CO_2$ inventory into sodium after the sodium-$CO_2$ boundary failure in printed circuit heat exchangers (PCHEs), which is considered for the supercritical $CO_2$ Brayton cycle power conversion system of a sodium-cooled fast reactor (SFR). The first phenomenon is plugging inside narrow sodium channels by micro cracks and the other one is damage propagation referred to as wastage combined with the corrosion/erosion effect. Experimental results of plugging shows that sodium flow immediately stopped as $CO_2$ was injected through the nozzle at $300{\sim}400^{\circ}C$ in 3 mmID sodium channels, whereas sodium flow stopped about 60 min after $CO_2$ injection in 5 mmID sodium channels. These results imply that if pressure boundary of sodium-$CO_2$ fails a narrow sodium channel would be plugged by reaction products in a short time whereas a relatively wider sodium channel would be plugged with higher concentration of reaction products. Wastage by the erosion effect of $CO_2$ (200~250 bar) hardly occurred regardless of the kinds of materials (stainless steel 316, Inconel 600, and 9Cr-1Mo steel), temperature ($400{\sim}500^{\circ}C$), or the diameter of the $CO_2$ nozzle (0.2~0.8 mm). Velocities at the $CO_2$ nozzle were specified as Mach 0.4~0.7. Our experimental results are expected to be used for determining the design parameters of PCHEs for their safeties.
In fully edentulous cases, which are accompanied by severe residual ridge resorption and impairment of supporting tissues of complete dentures, proper diagnosis and systemic treatment planning are required for the improvement in retention, stability, and support of prosthesis. Provisional restoration, while it is unfamiliar in complete denture restoration, can be used as a valuable tool, which makes possible to evaluate the stability of complete dentures and receive feedback from patients in complex clinical situations. In this case, a provisional denture was used to improve stability of impression, polished, and occlusal surfaces of complete denture, and to consider esthetic requirements before final denture construction. The result was clinically satisfactory in terms of functional and esthetical aspects.
Proceedings of the Korean Vacuum Society Conference
/
2012.08a
/
pp.285-286
/
2012
육각형 구조를 지닌 2차원의 물질인 그래핀은 우수한 전도도와 투과율로 투명전극의 신소재로 각광 받고 있다. 특히, 그래핀은 현재 투명전극으로 가장 많이 사용되고 있는 Indium Tin Oxide(ITO)로는 구현하기 힘든 Flexible display의 어플리케이션으로 사용하기 위한 목적으로 많은 기술 개발이 이루어지고 있다. 이러한 그래핀의 응용은 가장 먼저 그래핀의 생산이 안정적이고 원활히 이루어질 때 실질적으로 가능할 것이다. 하지만, 탄소로 이루어진 그래핀의 성장은 제한된 기판 위에서만 가능하기 때문에 성장이 이루어진 그래핀을 다른 기판에 전사시켜야하는 문제점이 있다. 그래핀 전사방법에는 직접전사, PMMA 전사, TRT 전사, 금속전사, 망전사, PDMS 전사 등 다양한 방법이 있다. 이 중에서 현재 가장 많이 사용되고 있는 전사방법으로는 직접전사, PMMA 전사, TRT 전사 방법이 있다. 직접전사의 경우 니켈위에 성장된 다층의 그래핀을 전사시킬 때 많이 사용되는 방법으로 니켈 에천트에 전사 시킬 그래핀을 띄워 니켈을 녹인 후 원하는 기판을 이용하여 전사하는 간단한 방법이다. 직접전사는 전사가 이루어진 후 그래핀에 남는 결함이 거의 존재 하지 않는 장점이 있지만 문제점은 단일층의 그래핀의 경우 니켈 에천트위에서 잘 보이지 않을 뿐 아니라 에천트에서 기판으로 전사할 때 너무 얇은 막으로 인해 다 찢어져버린다는 것이다. 이를 해결하기 위해 사용되는 전사 방법으로 TRT를 이용하여 구리위에 성장된 그래핀을 상온 시에는 점성을 가진 테이프를 이용해 부치고 구리에 천트에 구리를 녹인 후 원하는 기판위에 놓고 열을 가해 그래핀을 전사하는 방법이 있다. TRT 전사방법은 얇은 막의 그래핀을 찢어지지 않도록 지지해주어 대면적 기판위에도 전사 할 수 있는 장점이 있지만 전사 후 그래핀에 남아 있는 잔여물들이 많고(그림 1. (b)), 테이프를 이용한다는 점에서 그래핀의 얇은 막이 손상될 수 있는 단점이 있다. 그렇기 때문에 본 연구에서는 직접전사와 TRT전사의 문제점들인 전사 후 잔여물와 그래핀 단일층의 손상을 최소화할 수 있는 방법으로 PMMA전사를 가장 적합한 전사방법이라는 것을 라만 분석, 면 저항측정, 그래핀을 이용한 LED제작을 통해서 살펴 보았다. 먼저 라만 분석을 이용해 TRT전사 후 상당히 많은 빈 공간이 생김을 확인할 수 있었으며, 결과적으로 면 저항이 약 $1.5k{\Omega}$~$3M{\Omega}$까지 PMMA의 약 0.9~1.2 $k{\Omega}$와 비교했을 때 큰 차이가 있음을 확인할 수 있었다. 또한, 이후 각각의 전사방법으로 얻은 그래핀을 LED의 스프레딩 층으로 제작한 결과에서도 TRT전사방법보다 PMMA전사방법의 결과가 좋음을 알 수 있었다(그림 2).
Purpose: We evaluated the results of operative treatment of tibial plateau fractures using both arthroscopy and fluoroscopy. Materials and Methods: From May 1999 to February 2003, tibial plateau fractures were treated with arthroscopy. Tweenty seven patients are followed up over two years and the average follow-up period was fourty one months. We classified the fractures according to the Schatzker classification. We reduced the fracture over 2mm depression and displacement on articular surface in simple radiologic finding. Firstly, we treated the associated injuries and reduced the fractures using Steinmann pins. Then, we accomplished internal fixation or external fixation. Both the postoperative clinical and radiological results were evaluated by Rasmussen system. Results: In all tweenty seven cases, the fractures were healed completely in average fourty one months. According to Rasmussen classification, we obtained the excellent or good results in 23 cases. An average range of motion was between 2.5 degrees and 130 degrees. However, postoperative infection developed in one case and the other had loss of reduction. Conclusions: We consider that arthroscopically assisted operative treatment of tibial plateau fracture is a useful method. We can reduce joint surface correctly and treat associated injuries with arthroscopy. There are less complications.
Park, Jong-Sung;Ryu, Chang-Ha;Lee, Chung-In;Ryu, Dong-Woo
Journal of Korean Tunnelling and Underground Space Association
/
v.9
no.2
/
pp.133-141
/
2007
The excavation damaged zone (EDZ) is an area around an excavation where in situ rock mass properties, stress condition, displacement, groundwater flow conditions have been altered due to the processes induced by the excavation. Various studies have been carried out on EDZ, but most studies have focused on the mechanical bahavior of EDZ by in situ experiment. Even though the EDZ could potentially form a high permeable pathway of groundwater flow, only a few studies were performed on the analysis of groundwater flow in EDZ. In this study, the 'hydraulic EDZ' was defined as the rock zone adjacent to the excavation where the hydraulic aperture has been changed due to the excavation by using H-M coupling analysis. Fundamental principles of distinct element method (DEM) were used in the analysis. In the same groundwater level, the behavior of hydraulic aperture near the cavern was analyzed for different stress ratios, initial apertures, fracture angles and fracture spacings by using a two-dimensional DEM program. We evaluate the excavation induced hydraulic aperture change. Using the results of the study, hydraulic EDZ was defined as an elliptical shape model perpendicular to the joint.
Journal of the Korean Society for Nondestructive Testing
/
v.28
no.4
/
pp.315-322
/
2008
Valves in power plants are leaking internally by various damages including insertion of foreign objects on seat, seat crack, defects and fatigue crack of stem packing or welds etc. due to severe operating conditions such as high temperature and high pressure for extended period time. Acoustic emission(AE) technology should be applied in order to diagnose precisely and evaluate these valve internal leak. In this paper, results of studies which have accomplished in actual power plant are presented. We have analyzed background noise, AE signal level and frequency spectrum through laboratory tests on the basis of various actual conditions in power plant, and also have considered evaluation methods on the background noise, AE properties and the detectable minimum leak rate according to valve leak conditions through comparing with results of field tests in power plant. As a result of these studies, we conformed that evaluation of internal leak conditions including discrimination of leak or not, and the detectable minimum leak rate is possible, and also it is expected to contribute to safe operation and prevention of energy loss in power plants.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.