• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.11a
• /
• pp.3-13
• /
• 2002

고석하 등(2002)은 인터넷 소매상이 상품 품목의 명목 가격과 배송료를 이용해서 고객의 일회 총 구매 비용을 조절한다는 것을 밝혔다. 고석하 등(2002)은 같은 내용의 상품 조합을 인터넷 시장에서 구매하기 위한 비용과 전통 시장에서 구매하기 위한 비용을 비교하였다. 분석 결과, 그 교호작용과 함께, 상품 종류와 일회 구매액/가격의 크기의 두 요소가 인터넷 시장의 전통 시장에 대한 총 구매비용 할인율의 변동의 약 60％내지 80％를 설명할 수 있다는 것을 보여주었다. 한편, 구매액/가격은 인터넷 시장에서의 해당 산포도(전통 시장의 그것에 대비한)에는 거의 영향을 미31지 못하며, 상품의 종류도 산포도에는 할인율에서와 같이 큰 영향을 미치지 않았다. 인터넷 시장의 가격이나 구매비용 산포도는 상품 특성이나 구매액 크기 이외의 다른 요인에 의해서 주로 영향을 받는 것으로 나타났다. 따라서, 본 논문에서는 가격 요인 이외의 경제적 경쟁요인에 관한 실증연구로서, 2002년 6월 17일부터 20일까지, 소프트웨어, PC와 주변기기, 휴대폰, 가전제품, CD, 화장품, 그리고 책의 7가지 산업 전문 쇼핑몰과 종합 쇼핑몰을 대상으로, 인터넷 시장에서 수행되고 있는 경제적인 비가격 경쟁요인에 관한 실증 조사를 실시하였다. 조사 결과, 인터넷 시장에서 수행되고 있는 경제적인 비가격 경쟁요인은 매우 다양하며, 상품별로도 다른 특성을 보이고 있는 것으로 밝혀졌다. 인터넷 소매상의 경제적인 비가격 경쟁요인은 크게 배송료 면제와 배송료 외 인센티브 제도로 구분된다. 본 논문에서는 경제적인 비가격 경쟁요인의 모든 경우의 수를 고려할 수 있도록, 코드표를 작성하여 정리하고 분석하였다.기호로 인식하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.리되고 이원화된 코드체계와 데이터 형태의 이질화를 통일하는 방법으로 데이터웨어하우스 시스템을 제시하였다. 결국 병원에서 데이터웨어하우스 시스템의 구축은 임상, 연구, 교육의 유기적 순환관계를 정립하여 지식의 순환적 고리인 수집, 공유, 확산, 재창출을 지속적 유지할 수 있는 인프라를 구축해 준다. 반면 상이한 정보들간의 충돌과 이에 따른 해석의 오류로 잘못된 의사결정을 위한 정보를 제공할 수 있고 기초정보의 접근 및 추출의 유용성에 의해서 정보유출에 대한 문제가 한계점으로 나타났다.로세스 개선을 위해서 무엇을 정말로 필요로 하는지를 밝힘으로써, 한국 소프트웨어 산업의 현실적인 특수성을 고려한 소프트웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다. 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no sig

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.263-271
• /
• 2017

The application of mass spectrometry to polymer science has rapidly increased since the development of MALDI-TOF MS. This review summarizes current polymer analysis methods using MALDI-TOF MS, which has been extensively applied to analyze the average molecular weight of biopolymers and synthetic polymers. Polymer sequences have also been analyzed to reveal the structures and composition of monomers. In addition, the analysis of unknown end-groups and the determination of polymer concentrations are very important applications. Hyphenated techniques using MALDI-tandem MS have been used for the analysis of fragmentation patterns and end-groups, and also the combination of SEC and MALDI-TOF MS techniques is recommended for the analysis of complex polymers. Moreover, MALDI-TOF MS has been utilized for the observation of polymer degradation. Ion mobility MS, TOF-SIMS, and MALDI-TOF-imaging are also emerging technologies for polymer characterization because of their ability to automatically fractionate and localize polymer samples. The determination of polymer characteristics and their relation to the material properties is one of the most important demands for polymer scientists; the development of software and instrument for higher molecular mass range (> 100 kD) will increase the applications of MALDI-TOF MS for polymer scientists.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.1-6
• /
• 2001

In this study, reduced-scale experiments were conducted to understand smoke movements in tunnel fires with the natural ventilation. The 1/20 scale experiments were conducted under the Froude scaling since the smoke movement in tunnels is governed by buoyancy force. Three cases of experiments, in which a natural vent location varied from 1 m, 2 m and 3 m from the fire source symmetrically, were conducted in order to evaluate the effect of the position of ventilation systems on smoke movement. In case of a poo1 whose diameter is 4.36 cm, the temperature of smoke layer passed through the vent was maintained 7~$8^{\circ}c$ less than that of smoke layer without a vent. In case of a pool whose diameter is 5.23 cm, the average velocity passed through the vent was decreased when it was close to the fire source. And the maximum delay time was 3.86s. In CASE 1, the ceiling temperature was decreased by approximately 8$^{\circ}C$ and the vertical temperature was decreased by approximately $7^{\circ}c$. In CASE 2, both ceiling and vertical temperature wert decreased by $3^{\circ}c$ and in CASE 3, they were decreased by $2^{\circ}c$ each. It was confirmed that the thickness of smoke layer was maintained uniformly under the 25% height of tunnel through the visualized smoke flow by a laser sheet and the digital camcoder.

• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.597-602
• /
• 1992

To improve utilization of boxthorn (Lycii Fructus), the boxthron and mixed boxthron (Lycii Fructus, Schizandrae Fructus, Corni Fructus, Zizyphi Fructus, Zingiberis Rhizoma, Cinnamami Cortex) hot-water extractable concentrates were prepared by vaccum evaporation and its rheological properties were investigated. The rheological properties of concentrates $(20{\sim}50^{\circ}Bx)$ followed power low model and showed a pseudoplastic behavior at the temperature range of $20{\sim}60^{\circ}C$. The apparent viscosity of $20^{\circ}Bx$, $30^{\circ}Bx$, $40^{\circ}Bx$ and $50^{\circ}Bx$ boxthron hot-water extractable concentrate was 0.0074 Pa s, 0.0175 Pa s, 0.0431 Pa s and 0.0988 Pa s, that of mixed boxthorn hot-water extractable concentrate was 0.0099 Pa s, 0.0328 Pa s, 0.0720 Pa s and 0.1940 Pa s at $20^{\circ}C$ and 1500 l/s, respectively. The yield stress of boxthron and mixed boxthron hot-water extractable concentrates ranged from 0.045 to 6.253 Pa and from 0.022 to 8.891 Pa, respectively. The activation energy for the flow of boxthron and mixed boxthorn hot-water extractable concentrates increased from 1.6182 to $2.0543{\times}10^7\;J/kg{\cdot}mol$ and from 1.7057 to $2.1462{\times}10^7\;J/kg{\cdot}mol$ with the concentrations of concentrates, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.118-122
• /
• 2016

When a geometric size of moonpool and an inflow velocity are determined based on the similarity of Froude number, Reynolds number is depending on the scale ratio of moonpool geometry. It means that different characteristics of flow fluctuations in moonpool can be observed depending on the scale ratio of moonpool even though Froude number is the same. In the present study two dimensional numerical simulations were performed to investigate the influence of scale ratios on the flow characteristics inside the moonpool. The inflow velocity at several scale ratios was determined to keep Froude number constant. A periodic response was observed in a small size of moonpool while a large moonpool showed complicated fluctuations with various amplitudes and frequencies, which made it difficult to distinguish the statistical steady-state response from the temporal responses in the case of large moonpool. The similarity of Froude number gave rise to a spectral characteristic which was inversely proportional to the square root of scale ratios ($f_{0.5}{\approx}{\sqrt{2}}f_1{\approx}2f_{2.0}$) but a low frequent occurrence of strong vortex ($f_{2.0}=0.07$)which is observed inside the large moonpool was characterized depending on scale ratios.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.63-70
• /
• 2017

In this paper, a magnetic flux leakage(MFL) based steel bar damage detection was first researched to quantify the signals from damages on the wire rope. Though many researches inspecting damages using a MFL method was proceeded until the present, the researches are at the level that diagnose whether damages are or not. This has limitation to take measures in accordance with the damage level. Thus, a MFL inspection system was modeled using a finite element analysis(FEM) program dealing with electromagnetism problems, and a steel bar specimen was adopted as a ferromagnetic object. Then, an experimental study was also carried out to verify the simulation results with a steel bar which has same damage conditions as the simulation. The MFL signals was nearly not affected by the increase of the inspection velocity, and the magnitudes of the signals are not identical according to the change of the defect width even the defects have same depth. On the basis of the analysis, the signal properties from the damages were extracted to classify the type of damages, and it could be confirmed that classification of damages using extracted signal properties is feasible.

• Journal of the Korean Geophysical Society
• /
• v.3 no.1
• /
• pp.37-48
• /
• 2000

In order to investigate in-line ground motions caused by earthquakes, we examine the multicomponent complex trace analysis method (MCTAM) for the synthetic data and apply it to real earthquake data. An experimental result for synthetic data gives correct information on the arrival times, duration of individual phases, and approaching angles for body waves. Rayleigh waves are also easily identified with the MCTAM. A deep earthquake with magnitude of 7.3 was chosen to test various polarization attributes of ground motions. For P waves, instantaneous phase difference between the vertical and the in-line horizontal components ${\phi}(t)$, instantaneous reciprocal ellipticity ${\rho}(t)$, and approaching angle ${\tau}(t)$ are computed to be ${\pm}180^{\circ},\;0{\sim}0.25,\;and\;-30^{\circ}{\sim}-45^{\circ}$, respectively. For S waves, ${\phi}(t)$ tends to vary while ${\rho}(t)$ have values of $0{\sim}0.3\;and\;{\tau}(t)$ remains near vertical, respectively. A relatively low frequency signal registered just prior to the S wave event is interpreted as a P-wave phase based on its polarization characteristics. Velocities of P and S waves are computed to be 8.633 km/s and 4.762 km/s, and their raypath parameters 0.074 s/km and 0.197 s/km. Dynamic Poisson's ratio is obtained as 0.281 from the velocities of P and S waves.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2004

Switching phenomenon of a three-waveguide optical coupler was analyzed by using the coupled mode theory, and the coupling-length of the device was calculated by means of the FDM. CPW traveling-wave electrodes were designed by the CMM and SOR simulation techniques so as to satisfy the conditions of phase-velocity and impedance matching. Traveling-wave modulators were fabricated on a z-cut LiNbO$_3$ substrate. Ti was in-diffused in LiNbO$_3$ to make waveguides and Au electrodes were built on the waveguides by the electroplating technique. Insertion loss and switching voltage of the optical modulator were about 4 ㏈ and 15.6V. Network analyzer was used to obtain S parameters and corresponding RF response. From the measurement, parameters of the traveling-wave electrodes were extracted as such Z$_{c}$=39.2 $\Omega$, Neff=2.48, and a0=0.0665/cm((GHz) (1/2)). The measured optical response R(w) was compared with the theoretically estimated and both responses were shown to agree well. The measurement results revealed that the ㏈ bandwidth turned out to be about 13 GHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.696-701
• /
• 2018

The nitrogen oxides generated during combustion reactions have a great influence on the generation of acid rain and fine dust. As an NOx reduction method, exhaust gas recirculation combustion using Coanda nozzles capable of recirculating a large amount of exhaust gas with a small amount of air has recently been utilized. In this study, for the burner outlet with dual end opening, the use of a recirculation burner was investigated for the distribution of the pressure, streamline, temperature, combustion reaction rate and nitrogen oxides using computational fluid analysis. The gas mixed with the combustion air and the recirculated exhaust gas flow in the tangential direction of the circular cylinder burner, so that there is a region with low pressure in the vicinity of the fuel nozzle exit. As a result, a reverse flow is formed in the central portion of the burner near the center of the circular cylinder burner and the exhaust gas is discharged to the outside region of the circular cylinder burner. The combustion reaction occurs on the right side of the burner and the temperature and NOx distribution are relatively higher than those on the left side of the burner. It was found that the average NOx production decreased from an air flow ratio of 1.0 to 1.5. When the air flow ratio is 1.8, the NOx production increases abruptly. It is considered that the NOx production reaction increases exponentially with temperature when the air ratio is more than 1.5 and the NOx production reaction rate increases rapidly on the right-hand side of the burner.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.739-744
• /
• 2017

Elastic deformation and fatigue damage can cause the permanent deformation of a kart's frame during turning, affecting the kart's driving performance. A kart's frame does not contain any suspension or differential devices and, therefore, the dynamic behavior caused by torsional deformation when driving along a curve can strongly affect these two kinds of deformations. To analyze the dynamic behavior of a kart along a curved section, the GPS trajectory of the kart is obtained and the torsional stress acting on the kart-frame is measured in real time. The mechanical properties of leisure and racing karts are investigated by analyzing their material properties and conducting a tensile test. The torsional stress concentration and frame distortion are investigated through a stress analysis of the frame on the basis of the obtained results. Leisure and racing karts are tested in each driving condition using driving analysis equipment. The behavior of a kart when being driven along a curved section is investigated through this test. Because load movement occurs owing to centrifugal force when driving along a curve, torsional stress acts on the kart's steel frame. In the case of a leisure kart, the maximum torsional stress derived from the torsional fatigue limit was found to be 230 MPa, and the torsional fatigue limit coefficient was 0.65 when driving at a speed of 40 km/h. Furthermore, the driving elements during the cornering of a kart were measured based on an actual auto-test after installing a driving measurement system, and the driving behavior of the kart was analyzed by measuring its vertical displacement.