• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.181-184
• /
• 1993

일반적으로유압 장치를 사용하여 힘, 속도, 그리고 위치 등을 제어하는 경우 그 제어계의 설계, 제어방식의 선택에있어서는 최종 목표치의 정도, 응답성 등의 제어 성능을 고려함과 동시에 공업적으로는 가격, 동력효율 등이 중요한 설계인자로서 고려 되어 져야한다. 제어 방식응 벨브 제어와 펌프 제어 방식으로 크게 나뉘어 질 수 있으나, 벨브 제어방식에 있어서는 유압 서보벨브를 사용하여 출력 기구를 고정도로 직접 구도하는 것이 많으나 동력손실이 큰 편이며, 효율을 개선하기 위하여 압력 보상형 비례 전자 제어 벨브를 이용하는 것도 있으나, 소출력용으로서만 이용가능할 뿐이다. 이에 비하여 가변 용량형 펌프를 이용한 제어방식은 정도, 응답성은 다소 뒤떨어 지지만 효율이 양호하고 대출력 기구에 적용 가능하다는 점에서최근 주목의 대상으로되고 있다. 본 연구에서는 에너지의 효율적인사용이 가능한 전기. 유압 펌프 시스템을 설계하기위하여 먼저 각 신호전달 요소에 대한 동특성 및 정특성 실험을 행하여 시스템의 근사적인 모델링을 행하고 사판의 경사각을 제어함으로써 유압모터의 속도를 제어하는 시스템을 설계하여그 성능을 고찰하고자 한다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.7 no.3
• /
• pp.13-19
• /
• 2010

Hydraulic systems are widely used as a power transfer and/or power control system due to its flexibility, controllability, accuracy and high power density. Valve controlled and/or pump capacity controlled systems are normally adopted as a control device, but nowadays pump speed controlled systems are emerging as a new energy-efficient hydraulic control system. In this paper the pump speed controlled system for the cylinder position control of a counter balance circuit is investigated by simulation study and position control experiments were carried out. As a result, the possibility and efficiency of the pump speed controlled system were verified.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.291-298
• /
• 2013

In this paper a new hybrid-type control system is proposed which reduces the pump speed of an electro-hydraulic actuator consisting of a pressure-compensated variable displacement piston pump and a valve-controlled hydraulic cylinder, whenever the flow rate demand is low. In order to avoid interfering with the pressure regulator which also has an effect on swash plate angle, the pump speed is changed in proportion to the mean value of the speed component of position commands. Additionally a pressure switch is employed to prevent the system pressure from getting lower than a reference value. Based on computer simulation & experimental results, it is shown that the hybrid control can save the idling power up to 44% at a stand-by mode by reducing the pump speed from 1,800 rpm to 600 rpm without affecting the dynamic response of the electro-hydraulic actuator.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2007

This paper deals with the issue of trajectory tracking control of a clamping cylinder for injection moulding machine, which is directly driven by speed controlled hydraulic pump in combination with AC servomotor. As a fundamental step prior to tracking controller design, feedback control system is developed by implementing a position control loop parallel with a system pressure control loop. A sliding mode controller combining velocity feedforward scheme is developed for enhancing the tracking performance. Consequently a significant reduction in tracking error is achieved for both position and pressure control applications.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2006

This paper proposes an SRM drive system to improve the drive efficiency of the hydraulic system. From the maximum hydraulic pressure and flow rate required by the hydraulic system, a proper SRM is designed and tested. The proposed SRM drive system controls oil pressure of the hydraulic system as well as motor speed. A 2.2[kW], 12/8-pole SR motor and digital controller based DSP are designed and tested for hydraulic pump system. The test results show that the system has some good features such as high efficiency and rapid response characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1207-1212
• /
• 2011

This paper presents a study on the DSP(Digital Signal Processor) controller for the PBW(power-by-wire) system using BLDC(Brushless Direct Current) servo motor pump. The PBW hydraulic actuator was realized with hydraulic pump driven by BLDC servo motor, hydraulic cylinder and controller. This PBW system needs speed control of servo motor for linear thrust action of hydraulic cylinder. This paper implements a servo controller with vector control algorithm and MIN-MAX PWM technique. As CPU of a controller, TMS320F2812 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc.

• 기계와재료
• /
• v.25 no.3
• /
• pp.6-15
• /
• 2013

유압프레스의 단점을 극복하기 위해서 서보모트를 장착하여 성형속도를 높인 서보 유압프레스를 개발하게 되었으며, 특히나 서보모터를 국내산으로 적용하여 듀얼형으로 유압시스템의 효율성을 높여 최종적으로 개발함으로써 서보 유압프레스를 완전 국산화하였다. 또한 하사점 위치 제어의 용이성을 확보하기 위해 프레스 램용 메인 실린더에 톱니나사부를 만들어 임의의 위치에 정지할 수 있는 정지정도 및 하사점 위치 제어정밀도를 향상시켰으며, 유량의 미세 제어를 통해 프레스 램의 동작성을 개선코자 하였다. 다이쿠션은 메인 실린더와의 연계 제어를 통해 제품의 손상 방지 및 제품 추출의 용이성을 확보하였으며, 소재의 종류나 제품의 형상 특성에 따라 프리모션 제어가 가능한 지식기반형 자율제어 시스템을 적용하였다. 듀얼 서보시스템과 유압펌프가 연계구동함에 따라 기존 유압프레스 보다 약 40%이상의 에너지절감을 달성할 수 있을 것으로 예측되며, 현재 에코머신 인증제도에 대한 논의가 활발한 시점에서 매우 적합하고 필요한 하이브리드형 서보 유압프레스의 국산화 개발 사례라고 하겠다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.163-167
• /
• 2014

To prove the vibration and speed error problems caused by the nonlinear friction characteristics and load variation of the hydraulic system, a PID speed controller and a load compensation controller for the hydraulic inverter-fed elevator are proposed. The load compensation controller is composed by the PI controller and the speed controller is composed by the PID controller. The P,I and D gains of the control parameters are obtained by the frequency response of system transfer function. The Effectiveness of the proposed controller are shown by experimental results, which the proposed controller yields robustness with load variations and stable and good speed and acceleration responses with less oscillations.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.1
• /
• pp.55-64
• /
• 2002

Due to the friction characteristics of cylinders and the rail of a passenger car, in the system actuated with hydraulic systems, there exist dead zones, which can not be controlled by a PID controller. In this paper, the friction characteristics of a cylinder is examined, which may cause the abrupt increase of the acceleration in the zero-crossing speed region. To overcome the drawbacks of a PID controlled hydraulic system, a zooming fuzzy logic controller is designed and finally an improved hybrid controller is Proposed. The proposed controller is composed of the PID controller and the zooming fuzzy controller. The effectiveness of the proposed control scheme is shown by simulation and experimental results, In which the proposed hybrid control method yields good control performance not only in the zero-crossing speed region but also In the overall control region including steady-state region.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.3
• /
• pp.231-237
• /
• 2007

The torque ripple of the hydraulic pumps for the Electro-hydrostatic Actuators can disturb the cylinder position control under slewing speed operation condition. In principle, the periodic change of the reaction torque generated by a piston type pump is highly dependent on the waveform of its cylinder chamber pressure. In case of uni-directional pumps operating at constant speed, the transient overshoot and rising slope of the cylinder pressure can be adjusted by the precompression angle and notch shape of their valve plates. Therefore, the influence of the valve plate geometry on the torque ripple magnitude of a bent-axis type piston pump for EHA application was investigated in this study. The results showed that any improvement of the torque ripple of such a bi-directional pump can not be achieved by modifying the valve plate geometry, regardless of its operation speed.