• Title/Summary/Keyword: 속도자기 스펙트럼

Search Result 19, Processing Time 0.022 seconds

Velocity Calibration of Sinusoidal Mode for Mossbauer Spectrometer and Mossbauer Study on $Fe_3O_4$ (사인파속도형 Mossbauer 분광계의 속도눈금 매기기와 Magnetite의 Mossbauer 분광법에 의한 연구)

  • 이충섭;이찬영
    • Journal of the Korean Magnetics Society
    • /
    • v.7 no.5
    • /
    • pp.232-236
    • /
    • 1997
  • We have gone into details about the velocity calibration of sinusoidal mode for Mossbauer spectrometer. Since sinusoidal Mossbauer spectrometer has a ${\gamma}$-ray source that oscillates at the end of loudspeaker with the natural frequency. Doppler velocity is accurate and stable. From the analyzing Mossbauer spectra of $Fe_3O_4$ and U $Fe_3O_4$ (unbalanced $Fe_3O_4$), we have shown the power of correct velocity for sinusoidal mode.

  • PDF

Improvement of Current Velocity Estimation Method in an ADCP (ADCP에서의 유속 추정 방법 개선에 관한 연구)

  • Lee, Jonggil
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.21 no.9
    • /
    • pp.1818-1825
    • /
    • 2017
  • An Acoustic Doppler Current Profiler(ADCP) measures the current velocity and analyzes the degree of turbulence using Doppler effects of ultrasonic waves. Therefore, the autocorrelation or FFT spectrum estimates are obtained for extraction of current velocity in each spatial region. However, if the correlation method does not satisfy the assumption that the return signal spectra are symmetric Gaussian, the large bias errors can occur. Also, the accurate estimation of autocorrelation or FFT spectrum is difficult due to the short acquisition interval when the rapid changes of current velocity occur. Thus, in this paper, the estimation method of the autoregressive spectrum peak is suggested for the accurate current velocity measurement of both symmetric and asymmetric spectra. It is shown that estimation quality can be improved using the suggested method comparing with the conventional methods. Many return signals under the various environment are simulated and the results are compared and analyzed for evaluation of the suggested method.

A Study of the Vehicle Tire Damage Detection using Split Spectrum Processing (스플릿 스펙트럼을 이용한 자동차 타이어 손상 검출에 관한 연구)

  • Jeon, Jae-Seok;Kim, Ho-Yeon;Kang, Dae-Soo
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.10 no.6
    • /
    • pp.113-118
    • /
    • 2010
  • The split spectrum processing algorithm of an ultrasonic wave on the tire was studied for the damage detection of a driving vehicle's tire. The processing results of normal and damaged tire was compared using the split spectrum algorithm to estimate the maximum value. The result that used Auto-correlation in case of damaged tire, the damage feature point is detected during 81ms intervals at a speed of 100km/h and during 162ms periodicity at a speed of 50km/h. This results was meaned the possibility for the tire's damage decision by damaging material with using periodicity feature point of tire damage according to vehicle speed.

A Study on the improvement of power efficiency in red OLED using europium (Europium 금속착물을 이용한 적색 유기 EL 소자의 효율개선에 관한 연구)

  • Lee, Sang-Pil;Kim, Jun-Ho;Lee, Han-Sung;Kim, Young-Kwan;Kim, Jung-Soo
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.1705-1707
    • /
    • 2000
  • 유기 전기발광 디스플레이 (Electroluminescence Display; ELD)는 저전압 구동, 자기발광, 경량박형, 광시야각, 빠른 응답속도 등의 장점으로 차세대 디스플레이의 후보로서 주목받고 있다. Eu complex는 610 nm 부근에서 예리한 스펙트럼의 대역폭을 가지며 붉은색의 강한 형광을 나타내는 유기화합물로 잘 알려져, 있다. 새로이 합성한 란탄계 금속착물인 $Eu(TTA)_{3}TPPO$를 발광층으로 사용하여 적색 발광의 효율을 높이기 위해 소자를 제작하였고, 이 때 구동 전압은 9 V이고 18 V에서 가장 밝은 38cd/$m^2$의 휘도를 나타내었으며 전류밀도는 20mA/$cm^2$ 이었다. 제작된 소자의 EL 스펙트럼은 615 nm로 PL 스펙트럼과 동일하게 예리한 최대 피크를 나타내었고, 순환 전압전류법을 이용하여 각 유기 물질들의 에너지 준위를 알 수 있었으며, 각각의 소자들의 에너지 밴드 다이어그램을 통하여 전기적 특성을 분석하였다.

  • PDF

Shallow Shear-wave Velocities Using the Microtremor Survey Method (상시미동 측정을 통한 천부 횡파속도 연구)

  • Hwang, Yoon-Gu;Kim, Ki-Young
    • The Journal of Engineering Geology
    • /
    • v.16 no.4 s.50
    • /
    • pp.381-392
    • /
    • 2006
  • The passive surface wave survey using microtremor is conducted in areas of crystalline rock basements to obtain average shear-wave velocity structures to 30 m deep (Vs30), on which the earthquake-resistant design standard is based. Test data were recorded at two sites with triangular and L-shaped arrays for 4 seconds with an sampling interval of 2 ms. The microtremor recorded at a site were analysed using the spatial autocorrelation method to obtain phase-velocity spectra and effects of major factors such as size and shape of away and number of record and receiver were examined. At the other site, shear-wave velocities were derived from VSP and microtremor data separately. The results from these two methods agree to each other reasonably well, indicating that the microtremor method can be an effective geophysical tool to measure Vs30.

An experimental study for noise reduction of the cross-flow fan of the room air-conditioners (에어컨용 직교류홴의 저소음화를 위한 실험적 연구)

  • 구형모
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.11 no.6
    • /
    • pp.871-879
    • /
    • 1999
  • Present study explains some experimental results on the aerodynamic noise of the cross-flow fan usually installed in the indoor unit of the room air-conditioners and provides a simple reduction method of radiating sound to decrease the total noise level. The spectrums of the noise of the cross-flow fan were analyzed by the spectral decomposition method to characterize the generated sound. The unsteady fluctuating flow field was also measured using the I-type hot-wire probe. Comparing the spectral characteristics of the sound and the flow velocity, a useful noise reduction method was proposed which bounds the region with a fence where the flow fluctuations were noticeably changed in the same fashion as the source spectral distribution functions vary. To validate the proposed method for reducing noise generated by the cross-flow fan, the sound pressure levels of the cross-flow fan system were compared of the experimental rig with and without the bounding fence for various flow rates.

  • PDF

Turbulent Wake Flow around Tubes in Single Row Tube Banks (일렬관군에서의 난류 후류특성에 관한 연구)

  • 조석호;부정숙
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.13 no.5
    • /
    • pp.1023-1031
    • /
    • 1989
  • An experimental study is conducted to investigate the turbulent wake flow around tubes in vertical single row tube banks. All measurements are performed at Reynolds number(Re$_{max}$) 4.2*10$_{3}$ - 2.5*10$_{4}$ with varying tube spacings from the wide pitch ratio(H/D=3.07) to the very narrow one(H/D=1.23). Flow patterns are visualized using the smoke-wire method. Mean static pressures, velocity components, and various statistical quantities of turbulence are obtained by the computer on-line technique. In the case of wide tube spacings, the near wakes of tube show similar trends to those of a single tube, and their flow indicats an anisotropic turbulence. However, as the pitch ratio decreases, wide and narrow wakes appear alternately behind adjacent tubes due to the deflected flow. Also, in the case of H/D .leq. 1.54, Karman vortex is not formed at the side of relatively wide wake.e.

한일공동VLBI상관기의 지연 보상 및 프린지 멈춤 알고리즘

  • No, Deok-Gyu;O, Se-Jin;Yeom, Jae-Hwan;Park, Seon-Yeop;Gang, Yong-U
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.35 no.1
    • /
    • pp.45.1-45.1
    • /
    • 2010
  • 한국천문연구원과 일본 국립천문대는 공동으로 한일공동VLBI상관기(Korea-Japan VLBI Correlator, KJJVC)를 개발하였다. 이 상관기는 최대 16 관측국에 대하여 16 세트의 자기상관 및 120 세트의 상호상관을 계산할 수 있다. 각 관측국당 최대 8,192 Mbits/sec의 입력 데이터를 처리할 수 있으며, 8,192개의 주파수채널을 갖는 상관 스펙트럼을 약 25.4 밀리초~수초의 적분 시간으로 출력할 수 있는데, 최대 상관 출력 속도는 1.4GB/sec이다. 한편, 이 상관기는 한국우주전파관측망(KVN) 뿐만 아니라 동아시아VLBI관측망 및 우주공간VLBI관측망의 관측 데이터도 처리할 수 있도록 설계 제작되었으며, 최대 지연 추적 범위는 ${\pm}35,000km$이며, 보상 가능한 최대 기선 속도는 7.5km/sec이다. 현재 다른 VLBI관측망에서 사용하고 있는 타 상관기의 경우 지연은 2차 미분까지 보상하고, 프린지 위상은 3 단계로 보상하고 있는 것에 비하여, 한일공동VLBI상관기에서는 지연은 3차 미분까지 보상하여 지연 잔차를 최소화하고 프린지 위상은 16 단계로 세분하여 보상 수준의 정밀도를 최대화하였다. 이러한 지연 보상 및 프린지 멈춤 알고리즘을 상세히 소개하고 그 특성 및 장점을 보고한다.

  • PDF

Characteristics of Two-Dimensional Turbulent Wake Flow behind a Circular Cylinder (圓柱 뒤의 2 次元 後流 流動 特性)

  • 부정숙;윤순현;이종춘;강창수
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.9 no.5
    • /
    • pp.555-563
    • /
    • 1985
  • Two-dimensional turbulent wake flow behind a circular cylinder is investigated experimentally by suing linearized constant temperature hot wire anemometer. Turbulent fluctuations and mean velocity defects are measured in the rage of 5 dia.- 500 dia. downstream from the cylinder and for the Reynolds numbers of 2000-4000. Results with statistical treatment and digital data processing techniques are as follows: (1) The transition region from near wake to far wake is 30 dia. - 50 dia. downstream from the cylinder. (2) In the near wake, it is found that strong periodic ( f=845Hz) coherent structure exists. (3) It shows that the inertial subrange is 180Hz-2000Hz in self preservation region.

Experiments on the stability of the spatial autocorrelation method (SPAC) and linear array methods and on the imaginary part of the SPAC coefficients as an indicator of data quality (공간자기상관법 (SPAC)의 안정성과 선형 배열법과 자료 품질 지시자로 활용되는 SPAC 계수의 허수 성분에 대한 실험)

  • Margaryan, Sos;Yokoi, Toshiaki;Hayashi, Koichi
    • Geophysics and Geophysical Exploration
    • /
    • v.12 no.1
    • /
    • pp.121-131
    • /
    • 2009
  • In recent years, microtremor array observations have been used for estimation of shear-wave velocity structures. One of the methods is the conventional spatial autocorrelation (SPAC) method, which requires simultaneous recording at least with three or four sensors. Modified SPAC methods such as 2sSPAC, and linear array methods, allow estimating shear-wave structures by using only two sensors, but suffer from instability of the spatial autocorrelation coefficient for frequency ranges higher than 1.0 Hz. Based on microtremor measurements from four different size triangular arrays and four same-size triangular and linear arrays, we have demonstrated the stability of SPAC coefficient for the frequency range from 2 to 4 or 5 Hz. The phase velocities, obtained by fitting the SPAC coefficients to the Bessel function, are also consistent up to the frequency 5 Hz. All data were processed by the SPAC method, with the exception of the spatial averaging for the linear array cases. The arrays were deployed sequentially at different times, near a site having existing Parallel Seismic (PS) borehole logging data. We also used the imaginary part of the SPAC coefficients as a data-quality indicator. Based on perturbations of the autocorrelation spectrum (and in some cases on visual examination of the record waveforms) we divided data into so-called 'reliable' and 'unreliable' categories. We then calculated the imaginary part of the SPAC spectrum for 'reliable', 'unreliable', and complete (i.e. 'reliable' and 'unreliable' datasets combined) datasets for each array, and compared the results. In the case of insufficient azimuthal distribution of the stations (the linear array) the imaginary curve shows some instability and can therefore be regarded as an indicator of insufficient spatial averaging. However, in the case of low coherency of the wavefield the imaginary curve does not show any significant instability.