• Journal of computational fluids engineering
• /
• v.1 no.1
• /
• pp.142-149
• /
• 1996

이차원 노즐을 통하여 저밀도 환경으로 팽창하는 희박류의 분석에 있어서 불연속좌표법과 결합된 유한차분법(finite-difference method coupled with the discrete-ordinate method, FDDO)과 직접모사법(direct-simulation Monte-Carlo method, DSMC)이 비교되었다. FDDO를 이용한 분석에서는 충돌적분모델을 도입하여 간단해진 볼츠만식(Boltzmann equation)이 불연속좌표법을 이용하여 물리적 공간에서는 연속이나 분자속도 공간에서는 불연속좌표로 표시되는 편미분방정식군으로 변환되어 유한차분법에의하여 수치해석 되었다. 직접모사법에서는 분자모델로 가변강구모델(variable hard sphere model, VHS)이, 충돌샘플링모델로는 비시계수법(no time counter method, NTC)이 채택되었다. 전혀 다른 두 가지 방법에 의한 노즐 내부에서의 유체흐름 해석결과는 매우 잘 일치하였으며, 노즐 외부의 plume 영역에서는 FDDO에 의한 해석결과가 직접모사법에 의한 해석결과에 비하여 약간 느린 팽창을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.195-205
• /
• 1997

The propulsion marine diesel engine have been widely applied with a mechanical- hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechani¬cal - hydraulic governor to control the speed of engine under the condition of low speed and low load because of jiggling by rough fluctuation of rotating torque and hunting by dead time of Desiel engnie The performance improvement of mechanical - hydraulic governor is required to solve these problems of control system. The electro - hydraulic governor using PID algorithm is provided to compensate the faults of mechanical- hydraulic governor. In this paper, in order to analyze the ship speed control system, the transfer function was converted from the z tansformation to w transformation. The influence of dead time changing by engine speed which induces hunting phenomena was investigated by Nichols chart of w plane. As a method of performance improvement of mechanical hydraulic governor, a Eletro - hydraulic governor shows that fine control results can be obtained through optimal parameter tuning of PID

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.3
• /
• pp.233-240
• /
• 1995

Fick's diffusion equation was transformed into algebraic subsidiary equation with its initial and boundary conditions through Laplace transformation, and the subsidiary equation was transformed back on the basis of Burington's table of inverse transformations so that it became the solution of Fick's equation. The initial and boundary condition was for upward diffusion of salts into flooding water of constant depth from uniform polder soil of infinite depth containing constant concentration of salt. The derived solution was tested through comparison for its conformability with other solutions of simpler initial and boundary conditions. The importance of shallow transplanting of rice seedlings and salt removing by growing rice was mentioned on the basis of very slow desalting rate by diffusion calculated from the derived solutions.

• Journal of the Korean Geophysical Society
• /
• v.4 no.2
• /
• pp.113-120
• /
• 2001

The discrete wavelet transform(DWT) has potential as a tool for supplying discriminatory attributes with which to distinguish seismic events. The wavelet transform has the great advantage over the Fourier transform in being able to localize changes. In this study, a discrete wavelet transform is applied to seismic traces for identifying seismic events and picking of arrival times for first breaks and S-wave arrivals. The precise determination of arrival times can greatly improve the quality of a number of geophysical studies, such as velocity analysis, refraction seismic survey, seismic tomography, down-hole and cross-hole survey, and sonic logging, etc. provide precise determination of seismic velocities. Tests for picking of P- and S- wave arrival times with the wavelet transform method is conducted with synthetic seismic traces which have or do not have noises. The results show that this picking algorithm can be successfully applied to noisy traces. The first arrival can be precisely determined with the field data, too.

• Geophysics and Geophysical Exploration
• /
• v.24 no.4
• /
• pp.158-163
• /
• 2021

The frequency-domain induced polarization (IP) response based on Cole-Cole model is expressed as a simple equation in close form. However, it is difficult to compute the time-domain IP response based on Cole-Cole model or any other relaxation model because it cannot be written in closed form. In this study, using numerical experiments, we compared three numerical methods for calculating the time-domain IP response of the Cole-Cole model asymptotically: series expansion, digital linear filtering and Fourier transform. The series expansion method is inadequately accurate for certain time values and converges very slowly. A digital linear filter specially designed to calculate the time-domain IP response does not present the desired accuracy, especially at later times. The Fourier transform method can overcome the abovementioned problems and present the time-domain IP response with adequate accuracy for all time values, even though more computing time is required.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.612-615
• /
• 2000

Cam mechanism is one of the common devices used in many automatic machinery. Specially cylindrical cam generates three dimensional motions. Thus, the shape design procedures must have high accuracy. This paper proposes the shape design procedure for a cylindrical cam and follower mechanism using a relative velocity method. The relative velocity method and the coordinate transformation are used to find a contact point between the cam and the follower. Also, the full shape of the cylindrical cam can be generated by using the geometric relationships and the contact constraints. As a result, this paper presents an example for the shape design of the cylindrical cam in order to prove the accuracy of the design procedures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.790-795
• /
• 2000

디스크마다 일정영역을 할당하여 위치정보를 기록하는 임베디드 서보방식 하드디스크는 데이터가 저장되는 데이터 영역사이에서 스핀들 런아웃, 공진과 디스크 플러터 등에 의하여 Gaussian 분포를 가지는 트랙에서 벗어나는 오차를 가지게 된다. 더높은 저장밀도와 빠른 기록속도를 요구함에 따라서 디스크의 회전속도가 올라감에 의한 디스크 면진동에 의한 헤드 위치오차가 중요하게 대두되고 있다. 본 연구에서는 헤드위치 오차량을 계산하기 위하여 고속탐색이 가능한 수정된 Barasch의 수치해석법, 유한요소법, 그리고 실험을 통하여 적용가능성을 확인하였으며 같은 드라이브내에서 디스크의 사이즈를 바꿈에 의한 디스크 동특성의 해석과 변환율을 이용하여 오류가 발생할 수 있는 트랙 벗어남과 저장밀도의 상관관계를 살펴보았다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.425-428
• /
• 2004

본 논문에서는 시간영역에서 해양 음 전달 해석을 위해 엇갈림 격자에서 유사 스펙트럴 알고리듬을 기반으로 한 전산조직을 개발하였다. 유사 스펙트럴 방법은 파수 영역에서 파수에 음압의 푸리에 변환을 곱한 후 이를 역 푸리에 변환함으로서 공간 도함수를 구하는 방법이다. 유사 스펙트럴 방법은 빠른 푸리에 변환법의 사용으로 계산속도가 빠르며, 엇갈림 격자에서 이 방법을 사용하면 음 전달 현상을 정확하고 안정되게 모사할 수 있다. 무한 및 반무한 영역에서 이 알고리듬에 의한 결과가 해석해와 잘 일치함을 확인하였고, 다양한 해양환경에서 시간영역 모델링을 수행하여 스냅사진을 얻어내었으며 이 스냅사진을 통해 복잡한 해양환경에서 신호의 전파 현상을 파악할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 1986.07a
• /
• pp.131-145
• /
• 1986

흐름수역에서 연직상향으로 방류되는 평면부력\ulcorner의 거동이 연속방정식, 운동량방정식 및 추적물수송식의 기본방정식에 의하여 수치적으로 해석된다. 난류확산에는 Prandtld의 혼합거리이론을 도입한 난류수송모형이 이용된다. 수치해 과정은 기본방정식을 유함수(stream function)식, 와도수송(vorticity transport)식으로 변환한 후, \ulcorner방류속도와, 방류구폭 등으로 표현되는 변수와 흐름을 지배하는 무차원 매개변수를 도입하여 무차원 형태로 표현하는 부분과 successive under-relaxation과 Gauss-Seidel반복법으로 수행하는 부분으로 이루어진다. 적절한 relaxation 계수를 선정하므로써 안정되고 수렴성이 좋은 계산이 수행된다. \ulcorner방류 속도와 가로흐름 속도의 비가 속도비(Velocity ratio)로 정의되며 속도비가 8 - 15의 범위에서 부력\ulcorner으로 인한 주변흐름수역의 속도변화 온도상승범위, 흐름상태(유선) 및 와도가 조사되었으며 \ulcorner의 경로에 대하여 속도비와 방류밀도후르드수의 영향이 또한 조사되었다. \ulcorner중심선의 속도와 온도변화, 국부밀도후르드수의 변화가 구해지며 퍼짐율(dispersion ratio), 확산비(spreading rate)가 방류밀도후르드수, 국부밀도후르드수 및 방류구로부터의 경로의 항으로 해석되었다. 또한 속도와 온도 분포에 상사(similarity)가 존재함이 밝혀졌으며 본 연구와 같은 조건의 범위에서는 Gaussian분포를 이용한 적분형해석(intergal type analysis)이 가능한 것으로 사료된다.

• Korean Journal of Optics and Photonics
• /
• v.29 no.3
• /
• pp.99-103
• /
• 2018

Optical coherence elastography (OCE) is based on optical coherence tomography (OCT), which is a noninvasive, high-resolution, cross-sectional imaging technique. In this paper, we have developed dynamic optical coherence elastography to measure elasticity, a mechanical property of tissue, by phase difference. A piezoelectric actuator was used for sinusoidal mechanical loading of samples. Before applying this method to biomaterial, we assessed the feasibility of OCE with samples of sponge, eraser, and sharp lead. Cross-sectional and phase-difference images of the sample were obtained under sinusoidal loading. The strain rate was calculated from the phase-difference information. To obtain the envelope of the phase-difference oscillations along the horizontal direction, Hilbert transformation was performed at each depth. The elevation of the envelope was represented by color mapping, and we could measure the relative elasticity within the sample by comparing the elevations. Finally, there was an advantage when we calculated the shear rate using self-interference in the sample arm, instead of the interference between sample and reference arms.