• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.186-194
• /
• 1997

In this thesis, a new speed control algorithm based on the load torque observer theory is pro¬posed for the high performance speed control of a voltage source inverter to drive a 3 - phase induction motor. The proposed system becomes robust against disturbances using a feed -- for¬ward control of the load torque estimated at load torque observer. Computer simulation and experimental works using the proposed control confirm that transient response for the varia¬tion ofload torque becomes improved, compared with the conventional PI control method.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.48-53
• /
• 2012

A non-linear vehicle model and an observer are designed to observe the yaw rate and the body side slip angle when a vehicle is turning maneuver in this study. The developed vehicle model is a full car model and has fourteen degree of freedom. A Luenberg observer is applied to develop the observer. The vehicle model is validated with a reference result and shows good accordance. The observer is tested on dry asphalt, wet asphalt and snow paved road. The results prove the performance of observer is robust and reliable.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.161-167
• /
• 2001

This paper presents an approach to nonlinear engine idle controller and intake manifold absolute pressure(MAP) observer based on mean torque production model. A stable engine idle speed is important in that the unstable engine Idle mode can make engine to drooping or stall state. A sliding fuzzy controller has been designed to control engine idle speed under load disturbance. A sliding observer is also developed to estimate the intake manifold absolute pressure and compared with the actual MAP sensor value. The sliding mode observer has shown good robustness and good tracking performance. The inputs of sliding fuzzy controller are the errors of rpm and MAP. The output is a duty cycle(DC) for driving a idle speed control valve(ISCV).

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2355-2357
• /
• 2003

비선형성을 가지는 실제 플랜트의 제어기를 설계하기 위해서는 플랜트와 외부환경에 대한 충분한 정보를 필요로 한다. 그러나, 제어기 설계 시에는 실제 플랜트의 수학적 해석의 어려움, 모델링 오차와 외란 등의 원인으로 고려해야 할 복잡한 사항들이 있다. 이를 해결 하기 위한 기존 연구로는 플랜트에 대한 시스템 식별과 선형화를 통하여 공칭모델을 선정하고, 이를 제어하는 Model-based 방법과 모델이 아닌 실제 플랜트의 입출력 데이터를 토대로 제어기의 게인들을 반복 조절하는 Model-free 방법 등이 있다. 본 논문에서는 Model-free 방법 중에 하나인 반복 게인 조절 알고리즘을 기반으로 이 방법의 단점인 수렴속도지연을 보상하기 위한 목적으로 Model-based 방법 중에 하나인 외란 관측기(Disturbance Observer)를 결합한 새로운 제어 알고리즘을 제안하고, ODD(Optical Disk Drive)에서 사용되는 플 랜트에 적용한 모의 실험을 통하여 그 유용성을 보였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.110-119
• /
• 2000

This paper presents simple and effective nonlinear friction compensation methods. When the direction of position command reverses, the integrator output of the PID controller does not change the sign of its output instantaneously, due to friction at zero velocity, i.e. stiction resulting tracking errors, that results in continuous push even though the command direction has been changed. To overcome this problem, we attempt to reverse the sign of the integrator output as the sign of velocity changes. The effectiveness of this approach is demonstrated by experiments on a 3-PRPS (Prismatic-Revolute-Prismatic-Shperical joints) in-parallel 6-D.O.F manipulator. The control strategy has been analyzed for stability. Also discussed are disturbance observer and velocity observer approaches for friction compensation.

• Journal of Navigation and Port Research
• /
• v.31 no.10
• /
• pp.853-858
• /
• 2007

In this paper, a seesaw system composed with a moving cart on the rail and seesaw frame is made to demonstrate the effectiveness of the control theory. The control aim is to maintain an equilibrium of seesaw frame in spite of various initial conditions and an allowable disturbance. To solve this control problem, a PI-type state feedback controller using reduced-order observer is implemented and applied to the seesaw system. The reduced-order observer can be used to estimate the state variables in the case of the limit of sensor number or the constraint on setting sensors and the cost. A series of simulation are carried out to verify the effectiveness of the control system.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.3
• /
• pp.31-42
• /
• 1985

Thig paper used two feedback sensors, that is, potentiometer and tachometer in order to control DC motor. Also, the state feedback and kalman regular type in the linear system or the state feedback and on-off relay type in the non-linear system are used as control meth-ods for optimal control values. This compared and analyzed the control estimate of tracking angles by the estimate of three branches of methods of position and speed measured, position and speed by PD and position, speed and covariance by an observer.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.92-93
• /
• 2013

본 논문에서는 토크 예측제어 기반의 영구자석 동기전동기의 센서리스 속도 제어기법을 제안한다. 제안한 기법은 Reduced-Order Observer를 이용한 센서리스 방식으로 저속영역에서 불안정해지는 일반적인 센서리스의 단점을 보완하여 저속영역에서도 안정된 속도추정이 가능하다. 또한 토크 예측제어 방식을 사용하여 영구자석 동기전동기의 빠른 응답성과 토크리플 저감 효과를 얻을 수 있다. 제안된 제어기법은 시뮬레이션을 통하여 타당성을 확인한다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.170-173
• /
• 2004

In this paper design of speed observer and controller for AC servo system by rapid design system(RG-01D) using DSP of Realgain company is introduced. 'AC Servo-Designer' system, including CEMTool /SIMTool S/W, RG-DSPIO board, AC servo driver and AVTOTool program, is used in this research. Because 'AC Servo-Designer' system can use SIMTool blocks to design and implement various controller in short time, speed observer and controller for AC servo system is easily designed and implemented according to control objectives.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.381-384
• /
• 2001

본 논문에서는 간단한 외란 관측 기법을 이용한 영구자 석형 동기 전동기(Permanent Magnet Synchronous Motor: PMSM)의 비선형 속도 제어 기법이 제안된다. 피드백 선형화 (feedback linearization) 기법을 이용함으로써 비선형 요소가 효과적으로 제거되고 출력 오차 동특성을 선형 제어 기법에 기반 하여 설정할 수 있다. 그리고 파라미터 변동에 의한 비선형 외란을 제거하기 위해 본 논문에서는 외란 관측 기법을 이용한다. 제안한 관측기를 이용한 비선형 속도 제어 알고리즘이 파라미터 변동에 대해 강인한 제어 특성을 가짐을 시뮬레이션으로 확인하였다.