• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1085-1093
• /
• 2014

We investigate the amount of potential electricity energy generated by wind power in Busan metropolitan area, using the mesoscale meteorological model WRF (Weather Research & Forecasting), combined with small wind power generators. The WRF modeling has successfully simulated meteorological characteristics over the urban areas, and showed statistical significant to predict the amount of wind energy generation. The highest amount of wind power energy has been predicted at the coastal area, followed by at riverbank and upland, depending on predicted spatial distributions of wind speed. The electricity energy prediction method in this study is expected to be used for plans of wind farm constructions or the power supplies.

• 전력전자학회논문지
• /
• 제21권6호
• /
• pp.497-505
• /
• 2016

Operating wind turbine generators at maximum power point requires maximum power point tracking (MPPT) control methods. However, conventional methods cannot track the appropriate maximum power point in situations involving wind turbine systems based on a series operation strategy. These systems comprise one or more local maximum power points, and conventional methods can detect only one local maximum power point closed by a current operation point. This study proposes an advanced MPPT method for the series operation strategy of a small, grid-connected wind turbine system. In determining the appropriate maximum point, operations at certain local maximum power points are analyzed. The results show one appropriate point, which is tracked by the proposed MPPT method. The effectiveness of the proposed method is verified by the experimental results.

• 전력전자학회논문지
• /
• 제28권1호
• /
• pp.68-75
• /
• 2023

This paper proposes a three-phase single-stage AC-DC converter for the small wind generation system. Input power factor improvement and insulated output can be implemented with the proposed three-phase single-stage AC-DC converter under the wide power generation voltage (80-260 V_ac) and frequency (10-42 Hz) in a small wind power generation (WPG) system. The proposed converter is also capable of zero-voltage switching in the primary-side switches and zero-current switching in the secondary-side diodes by phase-shift control at a fixed switching frequency. In addition, it is possible to control a wide output voltage (V_o: 39 V_DC-60 V_DC) by varying the link voltage and improving the input power factor (PF) and the total harmonic distortion factor (THD_i). Simulation and experimental results verified the validity of the proposed converter.

• 대한기계학회논문집B
• /
• 제36권5호
• /
• pp.465-475
• /
• 2012

본 연구는 두 가지 목표를 가지고 수행하였다. 하나는 수치해석과 Design-FOIL Pro.를 이용해 블레이드 에어포일 모델개발이고, 다른 하나는 이 모델을 Folding blade에 적용하는 것이다. 일반적으로 1MW이상 대형풍력터빈용 블레이드는 강풍시에 피칭제어로 풍향에 대해서 평형상태를 유지하여 로터를 회전시키지 않는 방법으로 블레이드의 손상을 방지 하였지만, 소형풍력터빈용 블레이드는 설비비, 유지비등 경제성을 이유로 피칭제어를 채택하지 않아 블레이드의 파손 문제가 심각하다. 그래서 본 연구에서는 유지보수가 필요 없고 강풍에서도 파손이 없는 Spring pack을 이용한 로터를 직접설계(Direct-Design) 방법으로 설계하여, 그 성능을 검증 하고 변화 풍속에 맞는 폴딩각을 이용해 강풍시에도 Wind turbine이 Cut-out 없이 계속발전을 유지할 수 있도록 하는 점에 집중 연구하고자 한다.

• 한국태양에너지학회 논문집
• /
• 제23권2호
• /
• pp.21-34
• /
• 2003

This study aims to present the applicability of wind turbine generator system to urban buildings for the utilization of clean renewable energy. The results are as follows; According to the wind resource analysis, it has been found that small sized wind power system can be viable for buildings application due to the amplification of wind velocity around buildings or building clusters, in spite of low mean velocity of 2-3m/s in Seoul and Kyunggi urban areas. But planners must perform micrositing analysis around building so that wind turbine can be located at high velocity zones. The system must be designed to avoid obstacles preventing prevailing wind in buildings. It should be recognized that wind speeds are changing depending on the height and length from buildings. The wind power system can be used as a symbol of landmark which shows a sustainable architecture from the scenary Itself A case study for apartment building in urban showed that wind power systems can be applicable in two kinds of place, rooftops and ground levels. Especially, the wind power systems must be carefully positioned so that wind resources do not decrease when it is installed at ground levels. and according to life cycle cost analysis, adaption of new small win4 power systems to buildings were proved to produce a profit if it is considered the expense of environment improvement and the wind speed increasing according to rise of building height. This research will ultimately achieve green architecture that preserves nature and at the same time provides pleasant environment to humans, and will play a great role in establishing the environment-preserving sustainable architecture of the 21th century.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.484-489
• /
• 2014

Three phase PWM(Pulse Width Modulation) converter of the small-scale wind power system is able to charge battery under the rated wind speed regions. However, it is impossible to control output power of converter at the over win speed region because back-EMF(Electro Motive Force) of PMSG(Permanent Magnet Synchronous Generator) is higher than the battery terminal voltage of PMSG is reduced. However, the cut-off wind speed exists although battery charging algorithm is implemented by flux weakening control method. Therefore, this paper performs analysis of other factors which affects limitation wind speed. The validity of the analysis are verified through simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 추계학술대회 논문집
• /
• pp.71-75
• /
• 2001

Currently there are very limited amounts of resources and serious amounts pollution. Wind power generation system have an advantage of unlimited and unpolluted amount of energy resource. In this paper, for the application of these characteristic and for the generation to be achieved regard of districts and geographical features the energy continuously. The operation characteristics of system were analyzed through experiments for a trial product.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.485-486
• /
• 2011

대용량 전력변환기에서 대부분의 열은 IGBT 소자에서 발생한다. 따라서 소자의 방열을 위한 방열시스템은 전력변환기의 구동 뿐 아니라 각 장치들에 대한 소형, 경량화의 추세에 있어서도 중요한 부분을 차지한다. 본 논문에서는 소자의 냉각을 위해 수냉식 방법을 선정하였으며, 배관 구조에 따른 방열판의 방열특성을 비교하여 최적의 배관 구조를 가진 수냉식 방열판을 제안하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.487-488
• /
• 2011

본 논문에서는 풍력발전용 전력변환기 내부 소자의 방열에 사용되는 수냉식 방열판의 관 형상을 제안한다. 최근 대용량 전력변환기는 소형화 및 효율성이 중요시 되고 있으며, 이에 따라 기구의 안정적이고 장기적인 운영을 위한 수냉식 방열설계가 필수적이라 할 수 있다. 수냉식 방열판는 다수의 원형관으로 구성되며, 이 원형관의 형상은 방열판의 열전달 성능에 직접적인 영향을 주게 된다. 따라서 본 논문에서는 열전달 촉진을 위한 방열판의 관 형상들을 모델링하고 열해석 시뮬레이션을 진행하여 모델링된 방열판들의 방열특성을 비교/분석하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1066_1067
• /
• 2009

Wind power is one of most promising renewable energy. The output capacity of large wind turbine has been increased for off-shore application. Number of installation of small wind turbine also has been increased for the stand-alone and off-grid application of remote area and recently small wind turbine equipped with lamp on the pole is used for street lamp. Maximum wind energy must be extracted by wind turbine within rated wind speed. Power must be controlled to protect the system such as blade, generator, and power system above the rated wind speed. In this paper, small wind power system of 800W rating for battery charging is implemented and output power control by furling system is verified at wind tunnel test.