• Journal of KSNVE
• /
• v.10 no.2
• /
• pp.345-352
• /
• 2000

Recently, it becomes to be very important to reduce the cabin noise of passenger ship, according to the trend of speedy and luxury ship. The noise reduction and control techniques should be considered as important factors from the viewpoint of the sound problem of cabin. Therefore, ship designer has to improve the sound quality as well as to redece the sound pressure level in cabins. In this paper, for the new approach of these problems, we tried to find the trends of noise and sound quality of high-speed coastal passenger ships. Loudness, roughness, fluctuation strength, and sharpness are selected as the parameters for the evaluation of sound quality. The parameters are calculated by using the sound measured in cabin while the ship is running. Furthermore we tried to find the trend of each parameter in cabins and compare with that of sound pressure level. As results, we find that the loudness is linearly proportional to sound pressure level. But, the other parameters show different trends which may be caused by ship motion on the wave and fluctuation of propelling power.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1815-1816
• /
• 2006

소음은 환경 오염원의 하나로서 사람에게 육체적, 정신적 피해를 발생시킨다. 이에 소음 제어 기술의 필요성이 증대하였고, 그 중에서 제어가 까다롭고 고비용을 요구하는 저주파 소음 제어 기술의 개발이 확대되고 있다. 따라서 본 연구에서는 저주파의 주기적인 특성을 가지는 1차원 평면파 소음에 대한 능동 제어를 위해 기존의 적응 피드포워드 방법의 단점을 보완하는 적응 피드백 방법을 이용한 능동 소음 제어 시스템을 구성하고 능동 소음 제어 실험을 수행하였다. 이를 위해 소음원과 제어 음원을 가지는 덕트 형상의 실험 장치를 구성하였다. 제어기 설계를 위해 전파 소음을 예측하는 선형 예측법을 적용한 적응 디지털 필터를 구성하였으며 적응 알고리즘으로 Filtered-X LMS 알고리즘을 이용하였다. 제어기는 제어 알고리즘을 프로그램화하여 DSP에 입력함으로써 구성하였다. 실험에 사용된 소음은 500[Hz] 이하의 단일 주파수의 정현파 소음을 사용하였으며, 실험결과 음압 감소의 효과를 볼 수 있었다. 능동 소음 제어의 기술을 개발하여 하드웨어(덕트)의 모양 및 구조, 제어기의 종류 및 처리 속도, 주파수나 크기와 같은 특성이 급격히 변하는 소음의 경우에 능동적으로 소음을 제어할 수 있으며, 저주파 소음을 발생시키는 관형 연소기와 같은 장치 및 여러 분야에 응용이 가능하도록 하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.1-11
• /
• 2006

This study conducts a theoretical research on road traffic noise. Also, the domestic road noise forecast models were compared each other and analyzed with advanced countries' models to indicate the application possibility and problems. For the establishment of a general formula, we compared the forecasted value with the actual value applied in the formula proposed by the National Environment Institute, and examined the necessary improvement of the domestic road traffic noise forecast model. Also, a regression model was built to examine the relationship between traffic factors and noise. The traffic volume and speed are the main traffic factors used in this formula to affect the noise. From the results, it was found that the speed had a closer relationship with the noise rather than the traffic volume. Therefore, to decrease road noise, it is more important to control traffic speed. The spatial effect of road traffic noise within the apartment complexes was used in the case study to derive location-specific adjustment values. We surveyed the road traffic noise of three apartment complexes, and found that the road traffic noise within each complex was affected at plane level as well as at three-dimensionally. In other words, as the distance from the sound origin grows farther, noise level decreases. Also, it was found that noise increases as heigt goes up, but drops when the height goes beyond a certain level, and that the effect of noise decreases if there are obstacles along the path of the noise direction. Therefore, apartment site design should be done with consideration of the effects of noise in the future.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.2
• /
• pp.134-142
• /
• 2003

Most of the vibration and noise generating in small boats come from shipboard machinery such as main engine, generator and auxiliary machinery etc. In order to build up the comfortable environment for the crew and to reduce the ambient noise, and provide basic materials for reasoning selection application, the design under allowable vibration & noise conditions and the examination of vibration condition of the new ships, this paper researches the frequency spectrum and order analysis of vibration and noise. The obtained results are summarized as follows : Through comparing the small boat internal noise with the regulation of IMO and DNV, it revealed that the noise level of main engine room accords with the standard, and the noise of other places are beyond the values. In this paper, two boats are analyzed, which are same type, same size and power, but the main engines noise of them is different. In order to search the noise source, the noise of main engine room and relative parts are measured. The third order of measured points is dominant in frequency domain by the order analysis.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1993.04a
• /
• pp.123-127
• /
• 1993

소음방사의 이해 및 효과적인 소음제어를 위해서는 소음원의 특성, 음장의 공간상 방사 특성 등을 아는 것이 중요하며, 이를 위해 많은 연구가 진행되 어 왔다. 특히 다수의 마이크로폰 어레이를 이용한 음향 홀로그래피 방법에 의한 실험적 음장 예측 방법이 소개되었고 연구가 진행됨에 따라 많은 실용 가능성을 보여 주었다. 음향 홀로그래피 방법에는 측정상 제한이 필연적으로 존재할 수밖에 없는데, 이에 따른 오차가 존재하며 결국 예측음장의 신뢰도 를 떨어뜨리는 요인이 된다. 본 연구의 목적은 측정조건에 따른 오차의 요인 을 고찰하고 이를 정량적으로 표현함으로써 음향 홀로그래피 방법의 적용에 도움을 주고자 한다. 평면 음향 홀로그래피에 나타나는 오차는 둘러 싸기 오 차(wraparound error), 앨리애싱(aliasing), 창문영향(window effect)으로 나 눌 수 있는데, 오차는 측정구경의 크기와 마이크로폰 사이의 간격등의 측정 조건 뿐만 아니라 음원의 특성, 홀로그램 평면의 위치 등에 직접적인 영향을 받게 된다. 본 연구에서는 오차해석을 위한 기본 연구로써 점음원(monopole) 과 쌍극자(dipole)음장의 파수 스펙트럼을 해석적으로 구하고 이를 기본으로 평면 음향 홀로그래피 적용시 존재하는 앨리애싱에 대해 고찰하고 전산기 모의 실험 (computer simulation)을 통해 오차를 최소화하는 측정조건을 제 시하고자 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.816-820
• /
• 2011

A method for increasing the difference of side-lobe level in spherical microphone array is presented. In array signal processing, it is known that narrow interval between sensors can increase the difference between main lobe and side-lobe of array response which eventually increase the source recognition capability. Recent commercial array being used, however, have shown certain limitation in using the number of sensors due to its costs and geometrical size of array. To overcome this problem, we have adapted MEMS sensors into spherical microphone array. To check out the improvement, two different types of spherical microphone array were designed. One array is composed with 32 regular instrument microphones and the other one is 85 MEMS sensors. Simulation and experiments were conducted on a sinusoidal noise source with two arrays. The time history data were analyzed with spherical harmonic decomposition and beamforming technique. 85 MEMS sensors array showed the improved side-lobe level suppression by more than 4 dB above the frequency content of 2 kHz compared to 32-sensor array.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.208-215
• /
• 2012

The acoustic noise around a launch pad by launches of space launch vehicles was analyzed. The magnitudes of sound noise at some points near launch pad were predicted by locating the sound source at the exhaust jet plume of the rocket engine and considering several factors such as the directivity of the sound propagation and atmospheric attenuation. Specifically, the launch noise of Korea Space Launch Vehicle-I (KSLV-I) was estimated, and was compared to the actual measurement results. The analysis results proved to be heavily affected by the characteristics of directivity of sound propagation and the analysis showed good agreements with the measurements when the directivity of the sound was appropriately adjusted.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.263-270
• /
• 1996

Noise control of a plate structure with multiple disk shaped piezoelectric actuators is studied. The plate is excited by an acoustic pressure field produced by a noise source located below the plate. Finite element modeling is used for the plate structure that supports a combination of three dimensional solid, flat shell and transition elements. The objective function, in the optimization procedure, is to minimize the sound energy radiated onto a hemispherical surface of given radius and the design parameters are the locations and sizes of the piezoelectric actuators as well as the amplitudes of the voltages applied to them. Automatic mesh generation is addressed as part of the modeling procedure. Numerical results for both resonance and off resonance frequencies show remarkable noise reduction and the optimal locations of the actuators are found to be close to the edges of the plate structure. The optimized result is robust such that when the acoustic pressure pattern is changed, reduction of radiated sound is still maintained. The robustness of an optimally designed structure is also tested by changing the frequency of the noise source using only the actuator voltages as design parameters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1991.04a
• /
• pp.133-138
• /
• 1991

일반적으로 고무를 비롯한 점탄성재료는 형상 및 크기를 적절히 조절함으로 써 한 방향 이상으로의 원하는 스프링상수를 얻을 수 있으며, 금속에 비하여 내부 마찰에 의한 에너지 발산이 매우 크기 때문에 강제 진동시의 진폭저감 및 충격에 따른 자유진동의 감쇠에 널리 이용되고 있다. 이와 같은 진동감쇠 에 점탄성재료를 효과적으로 사용하기 위해서는 복소탄성계수 즉, 탄성계수 와 손실계수를 정확하게 알아내는 것이 필요하다. 점탄성재료의 복소탄성계 수는 주파수, 온도 및 변형률등에 따라 변하므로 이와 같은 사용조건의 함수 로 구해야 한다. 복소탄성계수를 실험적으로 구하는 방법은 여러가지가 있으 며 실험의 용이성과 관심대상에 따라 적절한 방법을 선택하게 된다. 본 연구 에서는 주파수변화에 따른 복소탄성계수를 임피던스법으로 집중질량 모형을 이용하여 구하려고 할 때, 실험데이타로부터 보다 정확한 결과를 얻기 위하 여 적절한 시편의 크기를 결정하는 방법을 제시하고자 한다. 이를 위해서 시 편내의 파동전달효과와 포아송비와 관련된 양단제한효과 그리고 정하중시 압축변형에 대한 시편의 좌굴등을 고려하여 이론적으로 해석하였으며 실험 적으로도 검증하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.6
• /
• pp.96-103
• /
• 2009

Wind power, Solar power and Fuel cell is the representative of new and renewal energy sources. In this paper, the frictional noise made by vehicles tire on roads is considered and researched as alternative electrical generation source. The amplitude and waveform of generated electricity with various types of vehicles according to their velocity, weight and distances between vehicles and sensor are measured and analyzed. As a result, all difference effects mentioned above which make the frictional noise affect quality and quantity of generated electricity. Maximum 0.53[V] and 0.028[W] electricity was generated by truck with 100[km/h] velocity on the express way.