• 제목/요약/키워드: 소음분리

검색결과 163건 처리시간 0.025초

MFC를 이용한 손상된 복합재의 능동제어 (Active Control of Damaged Composite Structure Using MFC Actuator)

  • 손정우;김흥수
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 추계학술대회 논문집
    • /
    • pp.535-540
    • /
    • 2013
  • In this work, active control algorithm is adopted to reduce delamination effects of the damaged composite structure and control performance with MFC actuator is numerically evaluated. Finite element model for the damaged composite structure with piezoelectric actuator is established based on improved layerwise theory. In order to achieve high control performance, MFC actuator, which has increased actuating force, is considered as a piezoelectric actuator. Mode shapes and corresponding natural frequencies for the damaged smart composite structure are studied. After design and implementation of active controller, dynamic characteristics of the damaged smart composite structure are investigated.

  • PDF

빔형성 방법을 이용한 경사 반사계수 측정 (Measurement of Oblique Incidence Reflection Coefficient Using Beamforming Method)

  • 주형준;강연준
    • 한국소음진동공학회논문집
    • /
    • 제13권6호
    • /
    • pp.438-444
    • /
    • 2003
  • A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(multiple signal classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique Is also used to reduce the coherence between the incident and reflected waves. Numerical and experiment results are performed to verify the accuracy of proposed method.

고속 전철 급전기의 접촉 분리를 고려한 동역학적 해석 (Dynamic Analysis of the Pantograph of a High-speed Electrical Train Considering Contact and Separation)

  • 이기수
    • 한국소음진동공학회논문집
    • /
    • 제16권6호
    • /
    • pp.634-642
    • /
    • 2006
  • For the analysis of dynamic contact between a catenary and a pantograph of high-speed electrical train, the numerical solution of the equations of motion of the vehicle pantograph and the catenary system subjected to the contact condition is obtained. The whole equations of motion of the catenary and the pantograph are simultaneously time integrated with the strict application of the contact condition. For the stability of the numerical solution, with the cubic spline interpolation of the catenary displacement, the velocity and acceleration constraints as well as the displacement constraint are imposed on the contact point. Especially it is shown that the Coriolis and centripetal accelerations are critical for the accuracy and stability of the computation.

반사파가 존재할 때 음향홀로그래피에서 빔형성 방법을 이용한 부분음장 분리 (Partial field decomposition using beamforming-based NAH under reflective condition)

  • 이원혁;강연준
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2001년도 추계학술대회논문집 II
    • /
    • pp.1323-1328
    • /
    • 2001
  • The theory of NAH is based on the assumption of reflection free. However, it is not always possible to meet this condition in many practical cases. Thus, a decomposition of direct and reflected fields is needed to apply NAH to reflective condition for noise problems. In addition, the decomposition of direct and reflected field can give acoustic characteristics of reflecting surfaces. This paper presents that in this condition the decomposition can also be successfully done by MUSIC(Multiple Signal Classification) power method and beamforming method, and that numerical simulation and real experiments verify its performance.

  • PDF

주기 비안정 연속계의 파라메터공진에 관한 주파수 해석 (Frequency Analysis on Parametric Resonance of Periodically Non-stationary Systems with Distributed Parameters)

  • 이용관;체추린
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.295-299
    • /
    • 2004
  • 본 논문에서는 주기 비안정 연속계의 해석을 위한 주파수 방법이 제안된다. 비안정시스템의 안정화를 위한 기존의 주파수 해석법을 일부 수정하여 연속계를 포함한 비안정 시스템에 적합하도록 수정하였으며, 직류모터와 동기발전기로 구성되어 있는 전기-기계 시스템에 적용하여 유용성을 보였다. 복잡한 비안정 연속계의 문제를 각 요소별 주파수 응답을 분리하고 조합하는 작업들을 통하여 쉽게 풀 수 있음을 보였다. 모터-발전기로 구성되어있는 전기-기계 시스템에서 발전기의 상호유도인덕턴스의 시간에 따른 주기적 변화와 장선(long electrical line)의 부하가 시스템의 불안정성을 야기함을 보였다.

  • PDF

층간 분리가 있는 지능형 복합재 적층판의 과도응답해석 (Transient Analysis of Delaminated Smart Composite Laminates)

  • 김흥수;김재환;최승복
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.469-475
    • /
    • 2004
  • The transient analysis of delaminated smart composite laminates is studied using an improved layerwise laminate theory. The theory is capable of capturing interlaminar shear stresses that are critical to delamination. The presence of discrete delamination is modeled through the use of Heaviside unit step functions. Stress free boundary conditions are enforced at all fee surfaces. Continuity in displacement field and transverse shear stresses are enforced at each ply level. In modeling piezoelectric composite plates, a coupled piezoelectric-mechanical formulation is used in the development of the constitutive equations. Numerical analysis is conducted to investigate the effect of nonlinearity in the transient vibration of bimodular behavior caused by the contact impact of delaminated interfaces. Composite plates with delamination, subject to external loads and voltage history from surface bonded sensors, are investigated and the results are compared with corresponding experimental results and plates without delamination.

  • PDF

우주비행체 분리장치 작동에 의한 충격현상 모의 시험기 개발 (Development of Shock Testing M/C to Simulate Pyro-technic Device Explosion of Space vehicle)

  • 김홍배;오진호;문상무;우성현;이상설
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2000년도 추계학술대회논문집
    • /
    • pp.581-586
    • /
    • 2000
  • Explosively activated pyro-technic device is used to release exhausted rocket booster or payloads at prescribed times in the rocket's flight. It creates pyro-shock environment that rocket or payload components must survive. With the shock spectra acquired from flight data, laboratory test should be performed before flight to check whether all of component can sustain the shock environment. The pyro-shock environment simulation was created by the resonance fixture response to a projectile impact. Desired shock spectra is realized by adjusting the natural frequency of resonance plate and the velocity of impact hammer. This paper describes the development process of Pyro-shock testing machine, which is designed and tested by Korean engineers, to verify components of Korean Sounding Rocket(KSR-3) and the other Korean space vehicle. Both analytical and experimental techniques are introduced in this paper.

  • PDF

병실내 소음도와 환자와의 관계 (A Study of the noise level in hospital and the Count-Measure against the noise)

  • 김명호;차일환
    • Journal of Preventive Medicine and Public Health
    • /
    • 제6권1호
    • /
    • pp.43-49
    • /
    • 1973
  • 서울시내 4개 종합병원에 대한 병실내 소음원을 조사 측정하고 상호영향관계를 검토하였다. 입원환자 171명을 무작위 추출하여 소음에 대한 반응도를 조사하여 측정된 소음과 비교 검토하였다. 결과적으로 거주지역에 위치한 2개의 병원은 유선방송의 스피커소리와 방문객에 의한 소음이 크고 상업지역에 위치한 2개의 병원은 교통소음이 크게 환자의 불평대상이 되고 있다는 결과를 얻었다. 그러나 61%의 환자들은 가정과 분리된 병원생황의 영향으로 약 60dB (A)의 음악 또는 기타소리를 원하고 있었다. 이런점을 고려하여 다음과 같은 방법으로 소음을 감소시킬 수 있을 것이다. 1. 보호자이외의 방문객수 및 체류시간을 단축시킨다 2. 병원내의 유선방송을 폐지시키고 무선통신방법을 활용한다. 부득이한 경우 사무실 위주로 방송한다. 3. 차량의 정지, 출발 그리고 가속시에 발생하는 소음의 영향을 감안하여 서울시당국에서 병원주위도로를 통행하는 차량에게 적당한 행정조치를 하고 고가도로 건설을 피하게 한다. 4. 병실내 환자의 기호에. 따라 들을 수 있는 청취장치를 (이어폰을 사용)하여 Masking Effect로 소음을 음폐토록 한다. 5. 도로변에 인접할 병실은 가능한한 사무실로 사용하고 병실로 사용시는 이중창을 장치하도록 한다.

  • PDF

고속도로 휴게소 환경개선을 위한 기능 증진 방안 연구 - 수도권 휴게소를 중심으로 - (A Study of the Functional Improvement for Comfortable Expressway Service Areas - Metropolitan Expressway Service Areas -)

  • 이원명;한봉호;김종엽;박석철
    • 한국조경학회지
    • /
    • 제43권3호
    • /
    • pp.63-76
    • /
    • 2015
  • 본 연구는 수도권에 설치된 고속도로 휴게소 5개소를 대상으로 휴게소 공간 및 환경 특성, 식재현황을 조사 분석하여 휴게소 조경공간의 문제점과 개선방안을 제시하였다. 공간 및 환경 특성에서는 토지이용, 녹지 배치, 토지피복과 환경영향 요인으로 소음 현황, 분리녹지대 지형 구조를 조사 분석하였다. 식재현황에서는 식재개념, 식재구조, 식생경관을 조사 분석하였다. 토지이용 현황은 건물 등 시설지가 81.6%, 녹지는 18.4%이었으며, 녹지는 경관공간 5.4%, 완충공간 9.1%, 녹음공간 0.7%이었다. 녹지 배치는 분리녹지대, 건물 좌 우측, 진 출입부, 휴게소 건물 후면에 주로 배치되어 있었다. 토지피복 현황으로 평균 불투수포장율은 79.3%, 평균 투수포장율은 20.7%이었다. 소음 측정 결과는 소음원인 고속도로와 휴게소의 배치, 분리녹지대의 유형 및 규격에 따라 차이가 있었다. 식재개념 현황은 경관식재 6.7%, 기타녹지 3.4%, 완충식재 4.6%, 완충+경관식재 2.0%, 녹음식재 1.1%, 경관+녹음식재 0.5%로 조경공간 대부분이 감상을 위한 공간 위주로 조성되어 있었으며, 이용자의 휴식, 위락 공간 등 적극적 이용 가능 공간은 부족하였다. 식재구조는 교목층식재 52.2%, 관목층식재 11.8%, 교목층+관목층식재 9.4%로 대부분 단층구조이었다. 식생경관은 조사지점에 따라 식재밀도, 식재구조, 생육상태의 영향을 받고 있었다. 고속도로 휴게소 환경 개선 방안은 기반환경 개선, 공간기능 개선, 식재기능 개선으로 구분하여 제시하였다. 기반환경 개선은 휴게소 소음 개선을 위한 분리녹지대 기능 강화, 물순환 체계 개선, 비점오염 저감을 위한 시설물 설치를 제시하였다. 공간기능 개선은 휴게공간 접근성 향상을 위하여 건물 좌우측에 조성되는 녹지를 건물 전면에 배치하는 휴게공간 배치 개선과 주차장 내 녹지섬 조성을 통한 열섬현상 완화 및 보행자 안전 확보를 위한 식재 및 조성 방안을 제안하였다. 식재기능에서는 분리녹지대 완충기능 강화를 위하여 다층형 수림대 조성, 외곽녹지 완충기능 확보를 위한 상록교목+낙엽교목+관목층의 식재구조를 제시하였다. 건물 전면과 이용 선호도가 높은 건물 좌측공간에 녹음공간을 조성하고, 주제 설정을 통한 경관공간 식재방안을 제시하였다.

초고속 원심분리기의 회전체동역학 설계 (The Ultra-Centrifuge Rotordynamics)

  • 이안성;김영철;박종권
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
    • /
    • pp.319-323
    • /
    • 1996
  • 정격속도 80,000 rpm 초고속 원심분리기(ultra-centrifuge)의 회전체동역학 설계가 수행된다. 설계목표는 충분한 위험속도(critical speed)의 분리여유(separation margin)와 함께, 다수의 고차 위험속도 통과시 원심분리기 로터의 위치에서 양호한 불균형응답특성을 갖는 로터-베어링 시스템의 최적구성을 이루어 내는 것이다. 후자의 특성은 불균형에 의해 가진될 때 로터의 질량중심이 회전축에 가능한 한 근접하도록 함으로써 만족시킬 수 있으며, 이를 위해 초유연축(extra slender shaft)이 적용된다. 이와 더불어, 특히 1차 위험속도에서 공진에 기인한 로터의 큰 변위를 방지하기 위해 범퍼링(bumper ring) 또는 안내베어링(guide bearing)의 설치가 필요하다. 유한요소법(finite element method)에 의한 회전체동역학 모델링이 수행되며, 지지 구름베어링의 강성과 함께 소량의 감쇠(damping)가 고려된다.

  • PDF