• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.298-304
• /
• 1995

유동이 있는 경우 발생하는 소음에 대한 실험적 연구는 풍동과 무향실이 결합된 음향풍동에서 수행될 수 있다. 이러한 음향풍동은 팬, 수축부, 수집부, 확산부 그리고 무향실에 주의해서 설계되어야 하고 특히 각 부분에서 발생할 수 있는 이차소음을 최소화하도록 설계되어야 한다. 최종적으로 소음기와 흡음재를 이용해서 팬소음과 이차소음의 전파를 줄인다. 본 음향풍동은 개방형 흡입식(open suction type)으로 시험부에서 유속 62.8m/s, 난류강도 0.1%이하, 배경소음 50-55dB 이하로 설계되었다. 이러한 조건을 만족시키기 위하여 하니콤과 6장의 스크린이 있는 정체실과, 21:1의 수축비를 갖는 수축부를 이용하여 난류강도를 낮추고, 흡음재와 90도 각도의 모서리 그리고 공명형과 소산형 소음기로 소음의 전파를 줄였다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.05a
• /
• pp.129-134
• /
• 2003

최근 소음문제가 큰 사회문제로 대두되고 있으며, 작업장에서 사용하는 에어노즐로부터 발생하는 소음이 작업환경을 저해하고, 그 소음강도가 작업자로 하여금 직업성 난청을 유발할 수 있는 위험수위에 있는 실정이다. 에어노즐은 사업장에서 사용할 경우 한 개씩 사용하는 경우가 매우 적고, 대부분 여러 개가 그룹으로 형성되거나 생산라인에 맞도록 조합하여 사용하기 때문에 고소음으로 인한 큰 피해를 유발하게 된다.(중략)

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.19-25
• /
• 2003

산업현장에서 에어를 사용함으로써 나타나는 소음에 작업자가 노출되면, 그 소음 강도에 따라 작업자로 하여금 건강장애, 소음성난청 등을 유발하는 여러 가지 문제점이 심각하게 나타나고 있는 실정이다.(중략)

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.11
• /
• pp.1020-1026
• /
• 2013

An accurate railway environmental noise prediction model is required to make the proper solution of the railway noise problems. In this paper, an engineering model for predicting the noise of conventional passenger cars is presented considering the acoustic source strength in octave-band frequencies and the propagation over grounds with varying surface properties. Since the formation of a train can be variable, the source strength of each locomotive and passenger car was estimated by measuring the pass-by noise and analysing the wheel-rail rolling noise. Some validation cases show on the average small differences between the predictions of the present model and the measurement results.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.521-526
• /
• 2003

In this study the traffic noises were investigated for the subjective allowing limitation ion and the testified classes, 7 point scale was selected to evaluate the annoyance level with vocabularies. As a result, 'relatively annoying' is the most suitable expression for the allowing 1imitation, and the sound pressure levels for the traffic was 44.4㏈.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.53-61
• /
• 2015

This paper reports the test results of the floating floor system used to reduce the floor noise of apartment buildings. Recently, many soft resilient materials placing between the reinforced concrete slab and finishing mortar are used. The resilient material should not only reduce the floor impact sound vibration from the floor but also support the load on the floor. Thus, even if soft resilient materials satisfy the maximum limitation of light-weight impact sound and heavy-weight impact sound, these materials may not support the load on the floor. The experimental program involved conducting sixteen sound insulation floating floor specimens. Three main parameters were considered in the experimental investigation: resilient materials, loading location, and layers of floor. Experimental results indicated that the stiffness of resilient material significantly influenced on the structural behavior of floating floor system. In addition, the deflection of the floating concrete floor loaded at the side or coner of the specimen was greater than that of the floor loaded at the center of the specimen. However, the aerated concrete did not effect on the cracking strength of floating floor system.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.3
• /
• pp.213-218
• /
• 2014

CFD flow simulation of vehicles with open sunroof and passenger window help the automotive OEM(original equipment manufacturer) to identify the low frequency noise levels in the cabin. The lock-in and lock-off phenomena observed in the experimental studies of sunroof buffeting is well predicted by CFD speed sweep calculations over the operating speed range of the vehicle. The trend of the shear layer oscillation frequency with vehicle speed is also well predicted. The peak SPL from the CFD calculation has a good compromise with the experimental value after incorporating the real world effects into the CFD model by means of artificial compressibility and damping correction. The entire process right from modeling to flow analysis as well as acoustic analysis has been performed within the single environment i.e., STAR-CCM+.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.202-207
• /
• 2016

Most of noises from cars or home appliances accompany successive impulsive noise due to repeated operation. A human auditory system is able to perceive the successive impulsive noise as either a set of independent noise or amplitude modulated noise according to its occurrence period. This study is to identify main influence factors on understanding of impulsive characteristics and find most appropriate sound quality metrics to express the successive impulsive noise. To do this, the successive impulsive noises were designed and utilized to perform a listening test for identifying conditions where successive impulsive noise can be recognized to have impulsive characteristics. These results were analyzed with sound quality metrics such as loudness, fluctuation strength, and roughness in order to compare the subjective results with the objective results. Consequently, the results revealed that the successive impulsive noise exhibits impulsive characteristics when its occurrence frequency is less than 50 Hz. It was also observed that roughness and fluctuation strength results are not applicable to express the successive impulsive noise because they heavily depend on the amplitude modulation characteristics. On the other hand, loudness results are considered to be useful as an evaluation factor of the successive impulsive noise through the use of loudness limen because it does not depend on the amplitude modulation characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.443-449
• /
• 1996

헬리콥터, 팬, 프로펠러, 터이빈같이 회전익에서 유체역학적 소음이 발생하는 장치의 설계에 있어서는 공기 역학적 성능 분석과 함께 소음에 대한 해석이 절대적으로 필요하다. 근래에 들어와서 소음에 대한 관심이 급격히 증가하고 공항 주변에서의 국제적인 규약들은 낮은 소음 수준(low noise level)을 규정하고 있으며, 이에 따라서 소음을 감소시키려는 연구가 매우 활발히 진행되고 있는 실정이다. 더욱이 컴퓨터의 냉각 팬을 비롯한 공조기기 및 산업기기에 사용되는 회전기계에서 발생되는 소음의 저감은 보다 더 쾌적한 환경을 요구하는 사회적 요구에 부합하면서 공력소음의 연구 분야가 더 넓어지고 있다. 본 논문에서는 소음예측 방법중의 하나인 음향상사(acoustic analogy)를 주파수 영역 방법(frequency domain method)을 이용하여 헬리콥터 블레이드의 고속 충격소음(High Speed Impulsive Noise)을 해석한다. 고속 충격소음은 블레이드-와류 상호작용 소음과 더불어 헬리콥터의 지배적인 소음원으로서 깃끝 속도가 큰 전진 수평비행(forward level flight)또는 제자리 비행(hovering flight)시 발생하는 소음으로 블레이드의 깃끝 마하수(critical Mach number)보다 크거나 비슷할 경우 충격파의 교란에 의해서 일어나는 충격적인 소음을 말한다. 고속 충격소음은 고주파수 스펙트럼 성분과 큰 소음강도를 가지고 있기 때문에 날카로운 금속성의 소리를 내며 먼 거리까지 전파되는 특징을 가지고 있다.

• Phonetics and Speech Sciences
• /
• v.16 no.2
• /
• pp.19-27
• /
• 2024

The Lombard effect is an involuntary response to speakers' experiences in the presence of noise during voice communication. This study aimed to investigate the Lombard effect by comparing the acoustic features of children and adults under different listening conditions. Twelve male children (5-9 years old) and 12 young adult men (24-35 years old) were recruited to produce speech under three different listening conditions (quiet, noise-55 dB, noise-70 dB). Acoustic analyses were then carried out to characterize their acoustic features, such as F0, intensity, duration, and vowel space area, under the three listening conditions. A Lombard effect was observed in the intensity and duration for children and adults who participated in this study under adverse listening conditions. However, we did not observe a Lombard effect in the F0 and vowel space areas of either group. These findings suggest that children can adjust their speech production in challenging listening conditions as much as adults.